Person

Marco Teller

M. Sc.

Senior Engineer - Materials Testing, Materials Modelling

Institute of Metal Forming

Address

Room: 105

Intzestraße 10

52072 Aachen

Contact

workPhone
Phone: +49 241 80 95910
Fax: +49 241 80 92234
 

Publications

Source Author(s)
[Journal Article]
Parametrisierung moderner Reibmodelle
In: Umformtechnik, 04/2019, 22-23, 2019
Henze, Michel
Hirt, Gerhard Kurt Peter
Teller, Marco
[Contribution to a conference proceedings]
Computergestütztes "Strain Hardening Engineering" für Crashboxen aus hoch Mangan Stahl
In: 33. ASK Umformtechnik "Ideen Form geben" Aachen 2019-03-28 - 2019-03-29, 265-274, 2019
Quadfasel, Angela
Teller, Marco
Hirt, Gerhard Kurt Peter
Haase, Christian
[Contribution to a book, Journal Article]
Production of bistable fully closed metallic shells by introducing residual stresses during bending processes
In: Production engineering, 13 (2), 201-209, 2019
[DOI: 10.1007/s11740-019-00875-6]
Pavliuchenko, Pavlo
Teller, Marco
Grüber, Markus
Bremen, Thomas
Hirt, Gerhard Kurt Peter
[Contribution to a book, Journal Article]
A Semianalytical Model for the Determination of Bistability and Curvature of Metallic Cylindrical Shells
In: Journal of manufacturing and materials processing, 3 (1), 22, 2019
[DOI: 10.3390/jmmp3010022]
Pavliuchenko, Pavlo
Teller, Marco
Grüber, Markus
Hirt, Gerhard Kurt Peter
[Contribution to a conference proceedings]
Investigation of texture evolution during rolling process of non-oriented Si based electrical steels with 2D and 3D RVEs
In: [6th European Conference on Computational Mechanics (ECCM 6), 7thEuropean Conference on Computational Fluid Dynamics (ECFD 7), 2018-06-11 - 2018-06-15, Glasgow, Scotland], 1428-1438, 2018
Vuppala, Aditya
Wei, Xuefei
Hojda, Stephan
Teller, Marco
Hirt, Gerhard Kurt Peter
[Journal Article]
Comprehensive procedure for the design of rolling schedules for roll bonding
In: International aluminium journal, 94, 57-59, 2018
Liu, Zhao
Krämer, Alexander Maximilian
Karhausen, Kai-Friedrich
Aretz, Holger
Teller, Marco
et al.
[Contribution to a book, Contribution to a conference proceedings]
Modellierung von Produkteigenschaften beim Walzen : Zielgrößengerechte Modellauswahl für Mikrostruktur, Textur und Oberfläche
In: Metallurgie im Wandel 4.0 : 32. Aachener Stahlkolloquium, 13.-14. September 2018, Tivoli Aachen, Tagungsband / Dieter Senk (Hrsg.) ; Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, Rheinisch-Westfälische Technische Hochschule Aachen, 262-272, 2018
Hirt, Gerhard Kurt Peter
Hojda, Stephan
Krämer, Alexander Maximilian
Teller, Marco
Wei, Xuefei
[Contribution to a book, Contribution to a conference proceedings]
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
In: 5th International Conference on New Forming Technology (ICNFT 2018) : Bremen, Germany, September 18-21, 2018 / F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan (eds.), 14010, [1]-7, 2018
[DOI: 10.1051/matecconf/201819014010]
Teller, Marco
Roß, Ingo
Prünte, Stephan
Temmler, André
Küpper, Moritz Emanuel
et al.
[Contribution to a book, Journal Article]
Investigation of Friction Conditions in Dry Metal Forming of Aluminum by Extended Conical Tube-Upsetting Test
In: Key engineering materials, 767, 189-195, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.189]
Teller, Marco
Ross, Ingo
Temmler, André
Poprawe, Reinhart
Prünte, Stephan
et al.
[Contribution to a book, Journal Article]
Laser Polishing of Cold Work Steel AISI D2 for Dry Metal Forming Tools : Surface Homogenization, Refinement and Preparation for Self-Assembled Monolayers
In: Key engineering materials, 767, 69-76, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.69]
Roß, Ingo
Temmler, André
Küpper, Moritz Emanuel
Prünte, Stephan
Teller, Marco
et al.
[Contribution to a book, Journal Article]
A New Coupled Thermal Stress FE-Model for Investigating the Influence of Non-Isothermal Conditions on Bond Strength and Bonding Status of the First Pass in Roll Bonding
In: Key engineering materials, 767, 301-308, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.301]
Liu, Zhao
Krämer, Alexander Maximilian
Karhausen, Kai-Friedrich
Aretz, Holger
Teller, Marco
et al.
[Journal Article]
Einfluss des Handpolierens von Probenkörpern auf Gestaltabweichungen erster Ordnung und das Verschleißverhalten in Tribometerversuchen
In: Dry metal forming open access journal, 4, 31-34, 2018
Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Küpper, Moritz
Temmler, André
et al.
[Contribution to a conference proceedings]
Remeshing framework for a multiphysics FEM solver exemplified by a damage sensitive extrusion process
In: [37th Senafor, 2017-10-04 - 2017-10-06, Porto Alegre, Brazil], 2017
Hojda, Stephan
Sturm, Karl J. X.
Teller, Marco
Hirt, Gerhard Kurt Peter
[Contribution to a book, Contribution to a conference proceedings]
Tribological investigations of the applicability of surface functionalization for dry extrusion processes
In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 140001, 1-6, 2017
[DOI: 10.1063/1.5008157]
Teller, Marco
Prünte, Stephan
Ross, Ingo
Temmler, André
Schneider, Jochen Michael
et al.
[Journal Article]
How dry is dry? A critical analysis of surface conditions used in dry metal forming
In: Dry metal forming open access journal, 3, 90-94, 2017
Almohallami, Amer
Arghavani, Mostafa
Böhmermann, F.
Freiße, H.
Herrmann, M.
et al.
[Journal Article]
Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium
In: Dry metal forming open access journal, 3, 073-080, 2017
Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Temmler, André
Poprawe, Reinhart
et al.
[Journal Article]
Decreasing friction during Al cold forming using a nanomolecular layer
In: Journal of vacuum science & technology : JVST / A, Vacuum, surfaces, and films, 35 (2), 020605, 2017
[DOI: 10.1116/1.4972515]
Prünte, Stephan
Music, Denis
Schneider, Jochen Michael
Teller, Marco
Hirt, Gerhard Kurt Peter
et al.
[Journal Article]
Abschätzung der umformtechnischen Grenzen des schmierstofffreien Kaltfließpressens von Aluminium anhand von Tribometerversuchen
In: Dry metal forming open access journal, 2, 56-61, 2016
Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Poprawe, Reinhart
Prünte, Stephan
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Extended Conical Tube-Upsetting Test to Investigate the Evolution of Friction Conditions
In: Key engineering materials, 716, 157-164, 2016
[DOI: 10.4028/www.scientific.net/KEM.716.157]
Teller, Marco
Klubakov, Alexej
Franzke, Martin
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
[Contribution to a book, Contribution to a conference proceedings]
Prozessnahe Charakterisierung von innovativen Oberflächen für das Trockenumformen
In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 345-354, 2016
Teller, Marco
Roeder, Roman
Hirt, Gerhard
[Contribution to a conference proceedings]
Investigation of the influence of laser surface modifications on the adhesive wear behavior in dry cold extrusion of aluminium
In: Lasers in manufacturing 2015 : LiM 2015 ; proceedings ; June 22 - 25, 2015, Munich ICM, Internationales Congress Center München, Germany ; [part of the] World of Photonics Congress / organizer WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., The German Scientific Laser Society ... General chair: Thomas Graf, 10 S., 2015
Roß, Ingo
Temmler, André
Willenborg, Edgar
Poprawe, Reinhart
Teller, Marco
[Journal Article]
Untersuchung zur Oberflächenmodifikation mittels Laserpolieren für das schmiermittelfreie Kaltfließpressen von Aluminium
In: Dry metal forming open access journal, 1, 143-151, 2015
Roß, Ingo
Temmler, André
Poprawe, Reinhart
Teller, Marco
Hirt, Gerhard
et al.
[Journal Article]
Methodik zur Entwicklung von interaktionsminimierten Oberflächenschichten für das schmiermittelfreie Kaltfließpressen von Aluminium
In: Dry metal forming open access journal, 1, 34-41, 2015
Teller, Marco
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.
[Journal Article]
Trockene Tribosysteme prozessnah beschreiben
In: Maschinenmarkt : MM, 45, 36-41, 2015
Teller, Marco
Hirt, Gerhard
[Journal Article]
A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium
In: CIRP annals, manufacturing technology, 64/1, 289-292, 2015
[DOI: 10.1016/j.cirp.2015.04.086]
Teller, Marco
Bambach, Markus
Hirt, Gerhard
[Journal Article]
Investigation of the suitability of surface treatments for dry cold extrusion by process-oriented tribological testing
In: Key engineering materials, 651/653, 473-479, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.473]
Teller, Marco
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.
[Contribution to a conference proceedings, Journal Article]
A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation
In: Conference Papers in Science, 2015, 496515, 2014
[DOI: 10.1155/2015/496515]
Teller, Marco
Seuren, Simon
Bambach, Markus
Hirt, Gerhard