Person
Prof. Dr.-Ing.Hauke Springer
UniversitätsprofessorInstitut für Bildsame Formgebung
Inhaber Lehr- und Forschungsgebiet Metallische Verbundwerkstoffe
Adresse
Raum: R207
Intzestraße 1
52072 Aachen
Kontakt
- WorkPhone
- Telefon: +49 241 80 95952
Fax
Fax:
+49 241 80 92378
Publikationen
| Quelle | Autor(en) |
|---|---|
| [Fachzeitschriftenartikel] Effect of Si on the hydrogen-based direct reduction of Fe2O3 studied by XPS of sputter-deposited thin-film model systems In: Scripta materialia, 233, 115515, 2023 [DOI: 10.1016/j.scriptamat.2023.115515] | Patterer, Lena (Corresponding author) Mayer, Eva B. Mráz, Stanislav Pöllmann, Peter Josef Hans, Marcus et al. |
| [Buchbeitrag, Fachzeitschriftenartikel] Plasticity of the C15-CaAl2 Laves phase at room temperature In: Materials and design, 225, 111504, 2022 [DOI: 10.1016/j.matdes.2022.111504] | Freund, Martina (Corresponding author) Andre, Doreen Sun, Pei-Ling Kusche, Carl F. Sandlöbes-Haut, Stefanie et al. |
| [Fachzeitschriftenartikel] Laves phases in Mg-Al-Ca alloys and their effect on mechanical properties In: Materials and design, 225, 111470, 2022 [DOI: 10.1016/j.matdes.2022.111470] | Zubair, Muhammad (Corresponding author) Felten, Markus Hallstedt, Bengt (Corresponding author) Vega Paredes, Miquel Abdellaoui, Lamya et al. |
| [Fachzeitschriftenartikel] Recycling‐Induced Copper Contamination of a 42CrMo4 Quench and Tempering Steel: Alterations in Transformation Behavior and Mechanical Properties In: Steel research international, 94 (3), 2200623, 2022 [DOI: 10.1002/srin.202200623] | Gramlich, Alexander Roald Michael (Corresponding author) Hinrichs, Torben Springer, Hauke Joachim Krupp, Ulrich |
| [Fachzeitschriftenartikel] The role of cementite on the hydrogen embrittlement mechanism in martensitic medium-carbon steels In: Materials science and engineering / A, 859, 144204, 2022 [DOI: 10.1016/j.msea.2022.144204] | Pinson, M. Springer, Hauke Joachim Depover, T. (Corresponding author) Verbeken, K. (Corresponding author) |
| [Fachzeitschriftenartikel] Phase transformations and microstructure evolution during combustion of iron powder In: Acta materialia, 239, 118261, 2022 [DOI: 10.1016/j.actamat.2022.118261] | Choisez, Laurine (Corresponding author) van Rooij, Niek E. Hessels, Conrad J. M. da Silva, Alisson K. Filho, Isnaldi R. Souza et al. |
| [Fachzeitschriftenartikel] The effect of an Al-induced ferritic microfilm on the hydrogen embrittlement mechanism in martensitic steels In: Materials science and engineering / A, 851, 143587, 2022 [DOI: 10.1016/j.msea.2022.143587] | Pinson, M. Springer, Hauke Joachim Verbeken, K. (Corresponding author) Depover, T. (Corresponding author) |
| [Fachzeitschriftenartikel] Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales In: International journal of minerals, metallurgy and materials, 29 (10), 1901-1907, 2022 [DOI: 10.1007/s12613-022-2440-5] | Ma, Yan (Corresponding author) Souza Filho, Isnaldi R. Zhang, Xue Nandy, Supriya Barriobero-Vila, Pere et al. |
| [Fachzeitschriftenartikel] Metallographic preparation methods for the Mg based system Mg-Al-Ca and its Laves phases In: Materials characterization, 192, 112187, 2022 [DOI: 10.1016/j.matchar.2022.112187] | Andre, D. (Corresponding author) Freund, M. Rehman, U. Delis, W. Felten, Markus et al. |
| [Fachzeitschriftenartikel] Combinatorial development of multicomponent Invar alloys via rapid alloy prototyping In: Materialia, 21, 101326, 2022 [DOI: 10.1016/j.mtla.2022.101326] | Rao, Ziyuan (Corresponding author) Springer, Hauke Joachim Ponge, Dirk Li, Zhiming (Corresponding author) |
| [Fachzeitschriftenartikel] The addition of aluminum to brittle martensitic steels in order to increase ductility by forming a grain boundary ferritic microfilm In: Scripta materialia, 213, 114606, 2022 [DOI: 10.1016/j.scriptamat.2022.114606] | Pinson, M. (Corresponding author) Das, S. M. Springer, Hauke Joachim Depover, T. (Corresponding author) Verbeken, K. (Corresponding author) |
| [Fachzeitschriftenartikel] Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores In: Journal of cleaner production, 340, 130805, 2022 [DOI: 10.1016/j.jclepro.2022.130805] | Souza Filho, Isnaldi R. (Corresponding author) Springer, Hauke Joachim Ma, Yan Mahajan, Ankita da Silva, Cauê C. et al. |
| [Fachzeitschriftenartikel] High Modulus Steel Produced by Cold Spray Additive Manufacturing In: Metallurgical and materials transactions / B, 53 (3), 1948-1957, 2022 [DOI: 10.1007/s11663-022-02509-2] | Otani, Lucas B. Schönemann, Lars Karpuschewski, Bernhard Baron, Christian Springer, Hauke Joachim et al. |
| [Fachzeitschriftenartikel] Investigation of the effect of carbon on the reversible hydrogen trapping behavior in lab-cast martensitic Fe-C steels In: Materials characterization, 184, 111671, 2021 [DOI: 10.1016/j.matchar.2021.111671] | Pinson, M. Claeys, L. Springer, Hauke Joachim Bliznuk, V. Depover, T. et al. |
| [Fachzeitschriftenartikel] A combinatorial study of the effect of Al and Cr additions on the mechanical, physical and corrosion properties of Fe In: Materials today / Communications, 29, 102947, 2021 [DOI: 10.1016/j.mtcomm.2021.102947] | Springer, Hauke Joachim (Corresponding author) Baron, C. Tanure, L. Rohwerder, M. |
| [Buchbeitrag, Fachzeitschriftenartikel] Metallurgical Gradients in Structural Materials: Potential and Challenges in Creating Artificial Segregations in Medium Manganese Steel via Roll-Bonding In: Steel research international, 92 (12), 2100429, 2021 [DOI: 10.1002/srin.202100429] | Klubakov, Alexej Haase, Christian Allam, Tarek Mansour Abdelraouf Sparrer, Yannik Pütz, René Daniel et al. |
| [Fachzeitschriftenartikel] Opportunities of combinatorial thin film materials design for the sustainable development of magnesium-based alloys In: Scientific reports, 11, 17454, 2021 [DOI: 10.1038/s41598-021-97036-6] | Hans, Marcus (Corresponding author) Keuter, Philipp Saksena, Aparna Sälker, Janis Alexander Momma, Markus et al. |
| [Buchbeitrag] High-Modulus Steels In: High-Performance Ferrous Alloys / edited by Radhakanta Rana, 291-326, 2020 [DOI: 10.1007/978-3-030-53825-5_7] | Springer, Hauke Joachim Baron, C. (Corresponding author) |
| [Fachzeitschriftenartikel] On the effect of carbon content and tempering on mechanical properties and stiffness of martensitic Fe-18.8Cr-1.8B-xC high modulus steels In: Materials science and engineering / A, 809, 141000, 2021 [DOI: 10.1016/j.msea.2021.141000] | Baron, C. (Corresponding author) Werner, H. Springer, Hauke Joachim |
| [Fachzeitschriftenartikel] Sustainable steel through hydrogen plasma reduction of iron ore: Process, kinetics, microstructure, chemistry In: Acta materialia, 213, 116971, 2021 [DOI: 10.1016/j.actamat.2021.116971] | Souza Filho, Isnaldi R. (Corresponding author) Ma, Y. Kulse, M. Ponge, D. Gault, B. et al. |
| [Fachzeitschriftenartikel] The effect of quench cracks and retained austenite on the hydrogen trapping capacity of high carbon martensitic steels In: International journal of hydrogen energy, 46 (29), 16141-16152, 2021 [DOI: 10.1016/j.ijhydene.2021.02.057] | Pinson, M. Springer, Hauke Joachim Depover, T. Verbeken, K. (Corresponding author) |
| [Buchbeitrag, Beitrag zu einem Tagungsband] Kombinatorik in der Stahlentwicklung In: Steel and more : ASK 34 : Aachener Stahlkolloquium : 19. November 2020 : Online-Konferenz : Tagungsband / Ulrich Krupp und Sebastian Münstermann (Hrsg.) ; Institut für Eisenhüttenkunde - Institut für Bildsame Formgebung, Rheinisch-Westfälische Technische Hochschule Aachen, 97-100, 2020 | Springer, Hauke Joachim (Corresponding author) Baron, C. Raabe, D. |
| [Fachzeitschriftenartikel] Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels In: Metallurgical and materials transactions / A, 51 (11), 5517-5586, 2020 [DOI: 10.1007/s11661-020-05947-2] | Raabe, Dierk (Corresponding author) Sun, Binhan Kwiatkowski da Silva, Alisson Gault, Baptiste Yen, Hung-Wei et al. |
| [Fachzeitschriftenartikel] Additive manufacturing of high modulus steels: New possibilities for lightweight design In: Additive manufacturing, 32, 101033, 2020 [DOI: 10.1016/j.addma.2019.101033] | Springer, Hauke Joachim (Corresponding author) Baron, C. Mostaghimi, F. Poveleit, J. Mädler, L. et al. |
| [Fachzeitschriftenartikel] Design of a V-Ti-Ni alloy with superelastic nano-precipitates In: Acta materialia, 196, 710-722, 2020 [DOI: 10.1016/j.actamat.2020.07.023] | Zhang, J.-L. Cann, J. L. Maisel, S. B. Qu, K. Plancher, E. et al. |
| [Fachzeitschriftenartikel] Qualification of the in-situ bending technique towards the evaluation of the hydrogen induced fracture mechanism of martensitic Fe-C steels In: Materials science and engineering / A, 792, 139754, 2020 [DOI: 10.1016/j.msea.2020.139754] | Pinson, M. Springer, Hauke Joachim Depover, T. Verbeken, K. (Corresponding author) |
| [Fachzeitschriftenartikel] Light, strong and cost effective: Martensitic steels based on the Fe - Al - C system In: Materials science and engineering / A, 762, 138088, 2019 [DOI: 10.1016/j.msea.2019.138088] | Springer, Hauke Joachim (Corresponding author) Zhang, J.-L. Szczepaniak, A. Belde, M. Gault, B. et al. |
| [Fachzeitschriftenartikel] Property‐Driven Development of Metallic Structural Materials by Combinatorial Techniques on the Example of Fe-C-Cr Steels In: Steel research international, 90 (12), 1900404, 2019 [DOI: 10.1002/srin.201900404] | Baron, Christian (Corresponding author) Springer, Hauke Joachim |
| [Fachzeitschriftenartikel] Combinatorial Alloy Design by Laser Additive Manufacturing In: Steel research international, 88 (8), 1600416, 2016 [DOI: 10.1002/srin.201600416] | Knoll, Helene Ocylok, Sörn Weisheit, Andreas Springer, Hauke Joachim Jägle, Eric et al. |
| [Fachzeitschriftenartikel] Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys In: Acta materialia, 98, 288-296, 2015 [DOI: 10.1016/j.actamat.2015.07.030] | Ma, Duancheng (Corresponding author) Yao, Mengji Pradeep, K. G. Tasan, Cemal C. Springer, Hauke Joachim et al. |
| [Fachzeitschriftenartikel] Composition Dependence of Phase Stability, Deformation Mechanisms, and Mechanical Properties of the CoCrFeMnNi High-Entropy Alloy System In: JOM, 66 (10), 1993-2001, 2014 [DOI: 10.1007/s11837-014-1133-6] | Tasan, C. C. (Corresponding author) Deng, Y. Pradeep, K. G. Yao, M. J. Springer, Hauke Joachim et al. |