Gerhard Hirt - RWTH AACHEN UNIVERSITY Institute of Metal Forming

Person

Prof.

Gerhard Hirt

Institute of Metal Forming

Former Head of the Chair

Address

Room: 008

Intzestraße 10

52072 Aachen

Contact

WorkPhone: Phone: +49 241 80 95907

Fax Fax: +49 241 80 92378

Email: gerhard.hirt@ibf.rwth-aachen.de

Website

Publications

Source	Author(s)
[Journal Article] Bending behavior of structured steel sheets with undercuts for interlocking with Al die-cast metal In: International journal of material forming, 17 (1), 2, 2023 [DOI: 10.1007/s12289-023-01797-6]	Ringel, Aron (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Examination of a Composite Ring Rolling Process with Different Wall Thicknesses to Produce a Ring of 1.7225 and 1.4462 in FEM and Experiment In: Proceedings of the 14th International Conference on the Technology of Plasticity / Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan editors. - Volume 1:, 266-274, 2023 [DOI: 10.1007/978-3-031-41023-9_27]	Kluge, Laurenz Maximilian (Corresponding author) Stergianou, Stefan Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Comparison of Different Characterization Strategies for the Parametrization of Post-dynamic Recrystallization of Inconel 718 in a Full-Field Model In: Proceedings of the 14th International Conference on the Technology of Plasticity / Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan editors. - Volume 3:, 529-537, 2023 [DOI: 10.1007/978-3-031-41341-4_55]	Brüggemann, Holger (Corresponding author) Elekyabi, Nadine Mostafa Talaat Hirt, Gerhard De Micheli, Pascal
[Contribution to a book, Contribution to a conference proceedings] Increasing the Occurring Normal Stresses in Conical Tube-Upsetting Test Using Adapted Specimen Geometries In: Proceedings of the 14th International Conference on the Technology of Plasticity / Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan editors. - Volume 3:, 711-718, 2023 [DOI: 10.1007/978-3-031-42093-1_68]	Henze, Michel (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Experimental and Numerical Studies on the Roll Bonding of Manganese/stainless Steel for Press Hardening In: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity : ICTP 2023 - Volume 3 / edited by Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan, 43-52, 2023 [DOI: 10.1007/978-3-031-41341-4_6]	Acuña, María Mora (Corresponding author) Liu, Zhao Ringel, Aron Bailly, David Hirt, Gerhard
[Journal Article] Hot deformation behavior and microstructure evolution of each single phase in DSS In: Journal of materials processing technology, 322, 118195, 2023 [DOI: 10.1016/j.jmatprotec.2023.118195]	Sasaki, Shunsuke (Corresponding author) Brüggemann, Holger Katsumura, Tatsuro Hirt, Gerhard
[Contribution to a book] Form Finding of a Sheet Metal Shell by Generative Design and Pareto Optimization In: Advances in Architectural Geometry, 269-382, 2023	Pofahl, Thorsten Christian Seiter, Alex Josef Trautz, Martin Reitmaier, Lisa-Marie Bailly, David et al.
[Journal Article] The adaption, evaluation and application of a semi-empirical bond strength model for the simulations of multi-pass hot roll bonding of aluminium alloys In: International journal of material forming, 16 (6), 71, 2023 [DOI: 10.1007/s12289-023-01795-8]	Liu, Zhao Krämer, Alexander Lohmar, Johannes Aretz, Holger Karhausen, Kai et al.
[Contribution to a book] Toward Holistic Digital Material Description During Press-Hardening In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-16, 2023 [DOI: 10.1007/978-3-030-98062-7_22-1]	Wesselmecking, Sebastian Ackermann, Marc Antoni Blankart, Charline Wang, Jing Brasche, Frederike Lina (Corresponding author) et al.
[Contribution to a conference proceedings, Journal Article] Investigation on evolution of microstructure and mechanical properties of heat-treatable 6010-S aluminium alloy during gas-based hot sheet metal forming process In: IOP conference series / Materials science and engineering, 1284 (1), 012005, 2023 [DOI: 10.1088/1757-899X/1284/1/012005]	Teeuwen, Tobias (Corresponding author) Baru, Naveen Krishna Bailly, David Hirt, Gerhard
[Contribution to a conference proceedings] Use of a Multi-Agent System to Leverage Knowledge from Different Stakeholders in Open-Die Forging In: [METEC & 6th ESTAD 2023, 2023-06-13 - 2023-06-15, Düsseldorf, Germany], 2023	Reinisch, Niklas Manuel (Corresponding author) Viehmann, Tarik Lakemeyer, Gerhard Hirt, Gerhard Bailly, David
[Contribution to a book] Materials in the Drive Chain - Modeling Materials for the Internet of Production In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-21, 2023 [DOI: 10.1007/978-3-030-98062-7_23-1]	Rajaei, Ali (Corresponding author) Becker, Marco Deng, Yuanbin Schenk, Oliver Rooein, Soheil et al.
[Contribution to a book] Enablers and Tools for Agile Product Development In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-21, 2023 [DOI: 10.1007/978-3-030-98062-7_18-1]	Kaster, Thomas (Corresponding author) Ackermann, Marc Antoni Bailly, David Bold, Marie-Noemi Bremen, Thomas et al.
[Contribution to a book, Contribution to a conference proceedings] Influence of intercritical annealing temperature on formability and mechanical properties of medium-manganese-steel in press hardening In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 833-838, 2023 [DOI: 10.21741/9781644902479-91]	Tilly, Karl Johann (Corresponding author) Plum, Tobias (Corresponding author) Bailly, David (Corresponding author) Hirt, Gerhard (Corresponding author)
[Contribution to a book] Decision Support for the Optimization of Continuous Processes using Digital Shadows In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-22, 2023 [DOI: 10.1007/978-3-030-98062-7_12-1]	Idzik, Christian (Corresponding author) Hilger, Daniel Hosters, Norbert Michael Kemmerling, Marco Niemitz, Philipp et al.
[Contribution to a book, Contribution to a conference proceedings] Approaches for load path design for stretch forming based on part surface geometry In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 943-950, 2023 [DOI: 10.21741/9781644902479-103]	Reitmaier, Lisa-Marie (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Advanced automatic pass schedule design for hot rolling by coupling reinforcement learning with a fast rolling model In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 601-610, 2023 [DOI: 10.21741/9781644902479-65]	Idzik, Christian (Corresponding author) Gerlach, Jannik Bailly, David Hirt, Gerhard
[Journal Article] Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling In: Journal of intelligent manufacturing, 2023 [DOI: 10.1007/s10845-023-02115-2]	Idzik, Christian (Corresponding author) Krämer, Alexander Maximilian Hirt, Gerhard Lohmar, Johannes
[Contribution to a book, Contribution to a conference proceedings] Optimizing the microstructure in open-die forgings using reinforcement learning In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 2061-2070, 2023 [DOI: 10.21741/9781644902479-221]	Reinisch, Niklas Manuel (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Modeling and control of tribological properties for subsequent forming process in skin-pass rolling In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 2115-2125, 2023 [DOI: 10.21741/9781644902479-226]	Li, Xinyang (Corresponding author) Schulte, Christopher Zhu, Runyu Abel, Dirk Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Application of Reinforcement Learning for the Design and Optimization of Pass Schedules in Hot Rolling In: Production at the Leading Edge of Technology : Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022 / edited by Mathias Liewald, Alexander Verl, Thomas Bauernhansl, Hans-Christian Möhring, 71-80, 2023 [DOI: 10.1007/978-3-031-18318-8_8]	Idzik, Christian (Corresponding author) Gerlach, Jannik Lohmar, Johannes Bailly, David Hirt, Gerhard
[Contribution to a conference proceedings] Überbetrieblicher Datenausstausch als Voraussetzung für adaptive Produktion In: [36. ASK Umformtechnik "Ideen Form geben", 2022-10-26 - 2022-10-27, Aachen, Germany], 293-303, 2022	Fjodorovs, N. (Corresponding author) Janßen, J. Schröer, T. Stich, Volker Thakare, Nilesh et al.
[Contribution to a conference proceedings] Self-supporting freeform shell structure made from sheet metal panels: Summary ofstructural analysis, planning tools, production chain and assembly In: [17th Advanced Building Skins Conference & Expo, 2023-11-20 - 2023-11-21, Bern, Switzerland], 35-44, 2022	Reitmaier, Lisa-Marie (Corresponding author) Bailly, David Hirt, Gerhard Pofahl, Thorsten Christian Seiter, Alex Josef et al.
[Book, Proceedings] Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband, 2022	Hirt, Gerhard (Editor)
[Contribution to a conference proceedings] On developing methods for simulation-aided layout of complex hot sheet metal forming processes In: [41st SENAFOR, 2022-10-05 - 2022-10-07, Porto Alegre, Brazil], 2022	Baru, Naveen Krishna (Corresponding author) Teeuwen, Tobias Bailly, David Hirt, Gerhard
[Journal Article] Schädigungskontrolle in der Warmumformung In: Stahl + Eisen, 04, 18-21, 2022	Gerlach, Jannik (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Regelung der Oberflächenrauheit im Nachwalzen auf Basis datengetriebener Modelle In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 211-224, 2022	Schulte, Christopher (Corresponding author) Li, Xinyang Hirt, Gerhard Abel, Dirk
[Contribution to a book, Contribution to a conference proceedings] Towards 3D Modelling of Cold Rolled Channel Structures for Interlocking Steel-Al Die Casting In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 497-508, 2022	Ringel, Aron Rob (Corresponding author) Hirt, Gerhard Lohmar, Johannes
[Contribution to a book, Contribution to a conference proceedings] Flat rolling of continuously cast Al-Cu compound strips with structured interface In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 487-496, 2022	Hoyer, J. (Corresponding author) Kammerloher, S. Holzer, K. Volk, W. Liu, Zhao et al.
[Contribution to a book, Contribution to a conference proceedings] Bewertung der Verbundfestigkeit von walzplattierten Chrom-Bor-Stahl-Verbunden zum Presshärten In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 477-486, 2022	Stennei, M. Kolpak, F. Tekkaya, A. E. Ringel, Aron Rob Plum, Tobias et al.
[Contribution to a book, Contribution to a conference proceedings] Mehrsinnig gekrümmte Leichtbaupaneele durch flexible Blechumformung - Realisierung eines Blechpavillions In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 467-476, 2022	Reitmaier, Lisa-Marie (Corresponding author) Bailly, David Hirt, Gerhard Pofahl, Thorsten Christian Seiter, Alex Josef et al.
[Contribution to a book, Contribution to a conference proceedings] Automatisierung der Prozessplanung und -optimierung für die Einzelteilfertigung komplexer Blechbauteile In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 455-466, 2022	Bremen, Thomas (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Optimiertes Freiformschmieden durch Reinforcement Learning In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 425-434, 2022	Reinisch, Niklas Manuel (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Schließen von Hohlstellen unter Scherbelastung im Freiformschmieden In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 405-414, 2022	Gouverneur, Moritz (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Production of High Silicon Electrical Steel by Twin Roll Casting In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 395-404, 2022	Müller, Max (Corresponding author) Czempas, Dorothea Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Flexibles formschlüssiges Fügen mittels Inkrementeller Blechumformung In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 359-368, 2022	Bailly, David (Corresponding author) Reitmaier, Lisa-Marie Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Systematische Entwicklung und Validierung von Simulationsmethoden für die Auslegung moderner gasbasierter Aluminiumwarmblechumformprozesse In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 271-282, 2022	Baru, Naveen Krishna (Corresponding author) Teeuwen, Tobias Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Simulation und Experimente zur Herstellung exzentrischer Ringe In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 247-256, 2022	Gröper, Mirko (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Auslegung und Herstellung von Verbundringen In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 235-248, 2022	Stergianou, Stefan (Corresponding author) Kluge, Laurenz Maximilian Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Stichplanauslegung für das Warmwalzen mittels Reinforcement Learning und Walzmodell In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 201-210, 2022	Idzik, Christian Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Simulation der Aushärtung von AL-Mg-Si Automobil-Legierungen In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 179-190, 2022	Wagner, Fabrice (Corresponding author) Hirt, Gerhard Brüggemann, Thiemo Bollmann, Christian
[Contribution to a book, Contribution to a conference proceedings] Mikrostruktursimulation von Warmumformprozessen mit der kommerziellen Software DIGIMU® In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 167-178, 2022	Brüggemann, Holger (Corresponding author) Quadfasel, Angela Hirt, Gerhard de Micheli, Pascal
[Contribution to a book, Contribution to a conference proceedings] Hochtemperatur-Doppelblech-Bulgetest zur Bestimmung der Grenzformänderung in der Aluminiumwarmblechumformung In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 111-122, 2022	Teeuwen, Tobias (Corresponding author) Baru, Naveen Krishna Tilly, Karl Johann Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Mikrostrukturabhängige Fließkurvenberechnung für hoch Mangan Stähle In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 91-100, 2022	Quadfasel, Angela Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] GLAMA-Forming the Future In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 63-64, 2022	Schwarz, Reinhard (Corresponding author) Horstmann, Stefan Schäfer, Hanno Rudolph, Fridtjof Bailly, David et al.
[Journal Article] Modellierung von Fließkurven In: Stahl + Eisen, 3, 43-48, 2022	Hirt, Gerhard Quadfasel, Angela (Corresponding author)
[Contribution to a conference proceedings] Simulation of the TWIP/TRIP effect of high manganese steels in dependence of the applied stress condition In: [5th International Conference on Medium and High Manganese Steels, 2022-05-23 - 2022-05-25, Linz, Austria], 146-149, 2022	Quadfasel (Corresponding author) Teller, Marco Hirt, Gerhard
[Journal Article] FepiM: Punktweise inverse Modellierung zur Bestimmung von Fließkurven für verschiedene Materialprüfverfahren In: Metall : Fachzeitschrift für Metallurgie ; Technik, Wissenschaft, Wirtschaft, 7/8, 195-199, 2022	Vuppala, Aditya Shiv Kanth (Corresponding author) Lohmar, Johannes Gerlach, Jannik Hirt, Gerhard
[Journal Article] Neue Messmethode erfasst Lage glühender Stahlringe In: @blechnet.com : die ganze Welt der Blechbearbeitung in einem Magazin, 2022 (7), 48488848, 2022	Gröper, Mirko Bailly, David Hirt, Gerhard
[Journal Article] Neue Messmethode erfasst Lage glühender Stahlringe In: Maschinenmarkt : MM, 7, 2022	Gröper, Mirko (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Evaluation of the Bond Strength of Roll Clad Chromium-Boron Steel Composites for Hot Stamping In: Hot Sheet Metal Forming of High-Performance Steel, CHS² : 8th international conference: May 30thto June 2nd, 2022, Barcelona, Spain : proceedings / edited by: Prof. Mats Oldenburg (Luleå University of Technology, Sweden), Prof. Jens Hardell (Luleå University of Technology, Sweden), Prof. Daniel Casellas (Eurecat, Centre Tecnològic de Catalunya, Spain/Luleå University of Technology, Sweden), 445-452, 2022	Stennei, Markus (Corresponding author) Ringel, Aron Rob Plum, Tobias Lohmar, Johannes Kolpak, Felix et al.
[Journal Article] Bonding Experiments at Elevated Temperatures: The Effect of the Sample Storage Time on the Bond Strength of Metals In: Steel research international, 2200462, 2022 [DOI: 10.1002/srin.202200462]	Nietsch, Jürgen Andreas Gouverneur, Moritz (Corresponding author) Schwab, Christian Bailly, David Martin, Manfred et al.
[Journal Article] Procedure to implement shear evolution in fast rolling models with online capability on the example of an aluminum flat rolling process In: Archive of applied mechanics, 92 (12), 3465-3502, 2022 [DOI: 10.1007/s00419-022-02238-7]	Rabindran, Rajeevan (Corresponding author) Karhausen, K. Hirt, Gerhard Teller, Marco Hojda, Stephan
[Journal Article] Microstructure Evolution and Magnetic Properties of a 4.5 wt% Silicon Steel Produced by Twin‐Roll Casting In: Steel research international, 2200554, 2022 [DOI: 10.1002/srin.202200554]	Müller, Max (Corresponding author) Bailly, David Hirt, Gerhard
[Journal Article] Investigation on the Influence of Shear on Void Closure in Open‐Die Forging Processes In: Steel research international, 2200327, 2022 [DOI: 10.1002/srin.202200327]	Gouverneur, Moritz (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] A Novel Benchmark Test for Validating the Modelling and Simulation Methodology of Modern Gas-Based Hot Sheet Metal Forming Processes In: NUMISHEET 2022 : Proceedings of the 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes / edited by Kaan Inal, Julie Levesque, Michael Worswick, Cliff Butcher, 785-801, 2022 [DOI: 10.1007/978-3-031-06212-4_71]	Baru, Naveen Krishna (Corresponding author) Teeuwen, Tobias Bailly, David Hirt, Gerhard
[Journal Article] Korngrößenvorhersage mit "Digimu" In: Umformtechnik, 2, 33-36, 2022	Brüggemann, Holger (Corresponding author) Quadfasel, Angela de Micheli, Pascal Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Development of a high-temperature double-layer bulge test for failure prediction in gas-based hot forming of a high-strength aluminium alloy In: 41st International Deep Drawing Research Group (IDDRG) Conference / editor: Prof Sandrine Thuillier, IRDL - Université Bretagne Sud ; co-editors; Prof Vincent Grolleau, IRDL - Université Bretagne Sud, on leave at ETH Zürich; Prof Hervé Laurent, IRDL - Université Bretagne Sud, 9 Seiten, 2022 [DOI: 10.1088/1757-899X/1238/1/012049]	Teeuwen, Tobias (Corresponding author) Baru, Naveen Krishna Tilly, Karl Johann Bailly, David Hirt, Gerhard
[Contribution to a conference proceedings] Application of Reinforcement Learning for the Optimized De-sign of Open-Die Forging Processes In: [Forming Technology Network of Bulk Metal Forming, ForTech 2022, 2022-05-18 - 2022-05-19, Stutgart, Germany], 140-144, 2022	Reinisch, Niklas Manuel (Corresponding author) Bailly, David Hirt, Gerhard
[Journal Article] Entwicklung einer automatisierten Freiformschmiedezelle In: Stahl : produzieren, verarbeiten, handeln, 03, 40-43, 2022	Rudolph, Fridtjof (Corresponding author) Schwarz, Reinhard Hirt, Gerhard
[Journal Article] Nutzbarkeit von Eigenspannungen in rohrförmigen Strukturbauteilen In: Stahl + Technik, 05, 56-62, 2022	Pavliuchenko, Pavlo (Corresponding author) Ringel, Aron Rob Hirt, Gerhard
[Journal Article] Leichtbaukonstruktionen aus Feinblech In: Stahlbau, 91 (6), 375-384, 2022 [DOI: 10.1002/stab.202200015]	Trautz, Martin Pofahl, Thorsten Christian Seiter, Alex Josef (Corresponding author) Hirt, Gerhard Reitmaier, Lisa-Marie et al.
[Contribution to a book, Journal Article] Determination of temperature dependent static Young's modulus of refractory ceramics using RUL tests In: International journal of ceramic engineering & science, 4 (2), 77-83, 2022 [DOI: 10.1002/ces2.10122]	Henze, Michel (Corresponding author) Reichert, Wanja Rafael Tonnesen, Thorsten Erik Telle, Rainer Hirt, Gerhard
[Journal Article] Verschleißschutzschichten auf Flachwalz-Arbeitswalzen simulativ bewerten In: Bänder, Bleche, Rohre : bbr, 56, 43-45, 2022	Liu, Zhao (Corresponding author) Quadfasel, Angela Bán, Andreas Tacke, Andreas Hirt, Gerhard
[Journal Article] Untersuchungen zu Umformeigenschaften rührreibgeschweißter Mischverbindungen In: Schweißen und Schneiden, 74 (3), 132-140, 2022	Rabe, Pascal (Corresponding author) Kordtomeikel, Roman Reisgen, Uwe Schiebahn, Alexander Hirt, Gerhard et al.
[Contribution to a book, Journal Article] Characterization Methods along the Process Chain of Electrical Steel Sheet : From Best Practices to Advanced Characterization In: Materials, 15 (1), 32, 2021 [DOI: 10.3390/ma15010032]	Heller, Martin (Corresponding author) Stöcker, Anett Kawalla, Rudolf Leuning, Nora Hameyer, Kay et al.
[Contribution to a conference proceedings] Operator in the Loop Control of Open-die Forging Based on Fast Models and Process Optimization In: [40th Senafor Conference, 2021-10-13 - 2021-10-15, Porto Alegre, Brazil], 2021	Rudolph, Fridtjof (Corresponding author) Reinisch, Niklas Manuel Hirt, Gerhard
[Journal Article] Einzelzahnspulen für leistungsstarke Motoren In: WT Werkstatttechnik online, 111 (10), 718-722, 2021 [DOI: 10.37544/1436-4980-2021-10-64]	Petrell, Daniel (Corresponding author) Hirt, Gerhard Börzel, Stefan Schäfer, Waldemar Kattner, Jens
[Contribution to a book, Contribution to a conference proceedings] High Precision Thickness Control in a Cold Rolling Mill using a Non-Linear Roll Stand Deflection Model In: 2021 European Control Conference (ECC), 1907-1912, 2021 [DOI: 10.23919/ECC54610.2021.9655117]	Schulte, Christopher (Corresponding author) Li, Xinyang Abel, Dirk Hirt, Gerhard
[Contribution to a book, Journal Article] Material Design for Low-Loss Non-Oriented Electrical Steel for Energy Efficient Drives In: Materials, 14 (21), 6588, 2021 [DOI: 10.3390/ma14216588]	Leuning, Nora (Corresponding author) Jaeger, Markus Schauerte, Benedikt Stöcker, Anett Kawalla, Rudolf et al.
[Contribution to a book, Journal Article] Grain Size Influence on the Magnetic Property Deterioration of Blanked Non-Oriented Electrical Steels In: Materials, 14 (22), 7055, 2021 [DOI: 10.3390/ma14227055]	Boehm, Lucas (Corresponding author) Hartmann, Christoph Gilch, Ines Stoecker, Anett Kawalla, Rudolf et al.
[Contribution to a book, Journal Article] Influence of Process Parameters on Grain Size and Texture Evolution of Fe-3.2 wt.-% Si Non-Oriented Electrical Steels In: Materials, 14 (22), 6822, 2021 [DOI: 10.3390/ma14226822]	Wei, Xuefei Krämer, Alexander Maximilian Hirt, Gerhard (Corresponding author) Stöcker, Anett Kawalla, Rudolf et al.
[Contribution to a conference proceedings, Journal Article] Model-based Control of the Strip Roughness in Cold Rolling In: IFAC-PapersOnLine, 54 (11), 109-114, 2021 [DOI: 10.1016/j.ifacol.2021.10.059]	Schulte, Christopher (Corresponding author) Li, Xinyang (Corresponding author) Abel, Dirk Hirt, Gerhard
[Contribution to a book, Journal Article] Integrated Process Simulation of Non-Oriented Electrical Steel In: Materials, 14 (21), 6659, 2021 [DOI: 10.3390/ma14216659]	Stöcker, Anett (Corresponding author) Weiner, Max Korpała, Grzegorz Prahl, Ulrich Wei, Xuefei et al.
[Contribution to a book, Contribution to a conference proceedings] On appropriate Finite Element discretization in simulation of gas-based hot sheet metal forming processes In: Digital technologies in sheet metal forming : 40th International Deep-Drawing Research Group Conference 2021 : Stuttgart, Germany / editors: Univ. Prof. Dr.-Ing. Dr.h.c. Mathias Liewald, MBA; Dr.sc.techn. Celalettin Karadogan, 012027, 1-8, 2021 [DOI: 10.1088/1757-899X/1157/1/012027]	Baru, Naveen Krishna (Corresponding author) Teeuwen, Tobias Teller, Marco Hojda, Stephan Braun, Alexander et al.
[Journal Article] Mechanism-controlled thermomechanical treatment of high manganese steels In: Materials science and engineering / A, 828, 142056, 2021 [DOI: 10.1016/j.msea.2021.142056]	Wesselmecking, Sebastian (Corresponding author) Haupt, Marco Ma, Yan Song, Wenwen Hirt, Gerhard et al.
[Contribution to a conference proceedings, Contribution to a dbook] Optimization of Open-Die Forging Using Fast Models for Strain, Temperature, and Grain Size in the Context of an Assistance System In: Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity / Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida Editors, 1145-1159, 2021 [DOI: 10.1007/978-3-030-75381-8_96]	Rudolph, Fridtjof (Corresponding author) Wolfgarten, Martin Christoph Keray, Viktor Hirt, Gerhard
[Contribution to a book, Journal Article] Twin Roll Casting and Secondary Cooling of 6.0 wt.% Silicon Steel In: Metals : open access journal, 11 (10), 1508, 2021 [DOI: 10.3390/met11101508]	Müller, Max (Corresponding author) Czempas, Dorothea Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Novel Roll-Bonded Stainless Steel/Boron-Steel Multilayer Under Hot Stamping Conditions In: Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity / Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida Editors, 2683-2694, 2021 [DOI: 10.1007/978-3-030-75381-8_222]	Kamaliev, Mike (Corresponding author) Teller, Marco Löbbe, Christian Hirt, Gerhard Tekkaya, A. Erman
[Contribution to a book, Journal Article] Modelling of Hot Flow Stress of Duplex Steel in Dependence of Microstructure Using the Rule of Mixture In: Metals : open access journal, 11 (8), 1285, 2021 [DOI: 10.3390/met11081285]	Quadfasel, Angela (Corresponding author) Nietsch, Jürgen Andreas Teller, Marco Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-Analytical Modeling In: Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity / Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida Editors, 2319-2330, 2021 [DOI: 10.1007/978-3-030-75381-8_194]	Pavliuchenko, Pavlo (Corresponding author) Teller, Marco Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] On the Geometrical Accuracy in Incremental Sheet Forming In: Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity / Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida Editors, 507-521, 2021 [DOI: 10.1007/978-3-030-75381-8_42]	Hirt, Gerhard Kordtomeikel, Roman Ulrich Christopher (Corresponding author) Bremen, Thomas Laugwitz, Marvin Bailly, David
[Contribution to a book, Journal Article] Successful Pass Schedule Design in Open-Die Forging Using Double Deep Q-Learning In: Processes : open access journal, 9 (7), 1084, 2021 [DOI: 10.3390/pr9071084]	Reinisch, Niklas Manuel (Corresponding author) Rudolph, Fridtjof Stergianou, Stefan Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Influence of pass reduction in cold rolling on damage evolution in deep drawing of rotationally symmetric cups In: Digital technologies in sheet metal forming : 40th International Deep-Drawing Research Group Conference 2021 : Stuttgart, Germany / editors: Univ. Prof. Dr.-Ing. Dr.h.c. Mathias Liewald, MBA; Dr.sc.techn. Celalettin Karadogan, 1-8, 2021 [DOI: 10.1088/1757-899X/1157/1/012050]	Nick, Matthias (Corresponding author) Liebsch, Conrad Müller, Martina Weiser, Ingo Felix Hirt, Gerhard et al.
[Journal Article] Modeling and exploiting the strip tension influence on surface imprinting during temper rolling of cold-rolled steel In: Advances in industrial and manufacturing engineering, 3, 100045, 2021 [DOI: 10.1016/j.aime.2021.100045]	Li, Xinyang (Corresponding author) Schulte, Christopher Abel, Dirk Teller, Marco Hirt, Gerhard et al.
[Journal Article] Voruntersuchungen zur Einsetzbarkeit des Walzprofilierens zur Herstellung bistabiler dünner Bleche In: Forschung im Ingenieurwesen = Engineering research, 85 (3), 817-825, 2021 [DOI: 10.1007/s10010-021-00488-5]	Pavliuchenko, Pavlo (Corresponding author) Teller, Marco Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Characterizing and simulating multi-pass hot roll bonding In: Materials data for smart forming technologies : MEFORM, 18.03.2021 / TU Bergakademie Freiberg IMF, ACATRAIN - Verein für Weiterbildung an der TU Bergakademie Freiberg, 77-80, 2021	Krämer, Alexander Maximilian (Corresponding author) Liu, Zhao Teller, Marco Hirt, Gerhard
[Journal Article] FepiM : A Novel Inverse Piecewise Method to Determine Isothermal Flow Curves for Hot Working In: Metals : open access journal, 11 (4), 602, 2021 [DOI: 10.3390/met11040602]	Vuppala, Aditya Shiv Kanth (Corresponding author) Krämer, Alexander Maximilian Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Journal Article] Analysis and manufacturing of bistable metallic profiles In: Archive of applied mechanics, 91 (8), 3501-3511, 2021 [DOI: 10.1007/s00419-021-01916-2]	Pavliuchenko, Pavlo (Corresponding author) Hirt, Gerhard Teller, Marco
[Contribution to a book, Contribution to a conference proceedings] Sheet Metal Shells In: 14. Baustatik Baupraxis. -23. und 24. März 2020, Universität Stuttgart / Herausgeber: Manfred Bischoff, Malte von Scheven, 439-446, 2020	Seiter, Alex Josef Pofahl, Thorsten Christian Trautz, Martin Reitmaier, Lisa-Marie Bailly, David et al.
[Journal Article] Neuer Versuchsstand zur Bestimmung von Kontaktwärmewiderständen In: Prozesswärme : PW., 2020 (3/4), 53-58, 2020	Menzler, Jan Erik Nietsch, Jürgen Andreas Lenz, Wolfgang Phillip Teller, Marco Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings] Economical production of conically shaped concentrated windings using forming technology for use in wheel hub engines In: 2020 10th International Online Conference Electric Drives Production Conference (EDPC) : 8 and 9 December 2020 : proceedings / sponsored by: IEEE, FAU - Friedrich-Alexander Universität Erlangen-Nürnberg, IAS - IEEE Industry Applications Society, PELS - IEEE Power Electronics Society, 188-195, 2020 [DOI: 10.1109/EDPC51184.2020.9388188]	Petrell, Daniel (Corresponding author) Teller, Marco (Corresponding author) Hirt, Gerhard (Corresponding author) Börzel, Stefan (Corresponding author) Schafer, Waldemar (Corresponding author)
[Contribution to a conference proceedings, Journal Article] Online Model Adaptation in Cold Rolling for Improvement of Thickness Precision In: IFAC-PapersOnLine, 53 (2), 10372-10379, 2020 [DOI: 10.1016/j.ifacol.2020.12.2776]	Wehr, Matthias (Corresponding author) Stenger, David Schätzler, Sven Matthias Beyer, Ralf Abel, Dirk et al.
[Contribution to a conference proceedings, Journal Article] A New Inverse Explicit Flow Curve Determination Method for Compression Tests In: Procedia manufacturing, 47, 824-830, 2020	Vuppala, Aditya shiv Kanth (Corresponding author) Krämer, Alexander Maximilian Braun, Alexander Lohmar, Johannes Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Design of Caliber Rolls Incorporating Load Path Dependent Damage Evolution In: Procedia manufacturing, 47, 643-648, 2020	Li, Xinyang (Corresponding author) Wang, Shuhan Lohmar, Johannes Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Prediction of Ductile Damage in the Process Chain of Caliber Rolling and Forward Rod Extrusion In: Procedia manufacturing, 47, 649-655, 2020	Clausmeyer, Till (Corresponding author) Schowtjak, Alexander Wang, Shuhan Gitschel, Robin Hering, Oliver et al.
[Contribution to a book, Contribution to a conference proceedings] Action Discretization for Robot Arm Teleoperation in Open-Die Forging In: 2020 IEEE International Conference on Systems, Man, and Cybernetics : Toronto, Canada, October 11-14, 2020 / IEEE, IEEE SMC - Systems, Man, and Cybernetics Society ; general chair and co-chair: Hossam A. Gabbar (Ontario Tech University, Canada), Ljiljana Trajkovic (Simon Fraser University, Canada) ; publication co-chairs: Mohamed Elgendi (University of British Columbia, Canada), Hamed Shah-Mansouri (Sharif University of Technology, Iran), 2100-2105, 2020 [DOI: 10.1109/SMC42975.2020.9283043]	Behery, Mohamed (Corresponding author) Tschesche, Matteo (Corresponding author) Rudolph, Fridtjof (Corresponding author) Hirt, Gerhard (Corresponding author) Lakemeyer, Gerhard (Corresponding author)
[Journal Article] Lubricant-free tribology concepts for cold extrusion by interaction-reduced surfaces In: Dry metal forming open access journal : DMFOAJ, 6, 166-191, 2020	Teller, Marco (Corresponding author) Prünte, Stephan Ross, Ingo Küpper, Moritz Emanuel Poprawe, Reinhart et al.
[Contribution to a conference proceedings, Journal Article] Model framework for the simulation of microstructure and yield stress during aging of industrial Al-Mg-Si aluminum alloys In: Procedia manufacturing, 50, 368-375, 2020 [DOI: 10.1016/j.promfg.2020.08.068]	Wagner, Fabrice (Corresponding author) Bollmann, Christian Brüggemann, Thiemo Hojda, Stephan Teller, Marco et al.
[Contribution to a conference proceedings, Journal Article] Simulation-as-a-Service for Reinforcement Learning Applications by Example of Heavy Plate Rolling Processes In: Procedia manufacturing, 51, 897-903, 2020 [DOI: 10.1016/j.promfg.2020.10.126]	Scheiderer, Christian (Corresponding author) Thun, Timo Idzik, Christian Posada Moreno, Andres Felipe Krämer, Alexander Maximilian et al.
[Contribution to a book, Contribution to a conference proceedings] Untersuchung der schweißparameterabhängigen Umformbarkeit rührreibgeschweißter Aluminium-Kupfer-Mischverbindungen In: 40. Assistentenseminar Füge- und Schweißtechnik : Vorträge der gleichnamigen Veranstaltung in Braunlage vom 25. bis 27. September 2019 / das 40. Assistentenseminar wurde vom Institut für Schweißtechnik der Technischen Universität Clausthal veranstaltet, 88-97, 2020	Rabe, Pascal (Corresponding author) Schmitz, Roman Ulrich Christopher Reisgen, Uwe Schiebahn, Alexander Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Model Predictive Control of an Overactuated Roll Gap with a Moving Manipulated Variable In: 2020 American Control Conference : Sheraton Denver Downtown Hotel, Denver, CO, USA / general chair: Santosh Devasia (University of Washington) ; publications chair: Meeko Oishi (University of New Mexico), 1931-1936, 2020 [DOI: 10.23919/ACC45564.2020.9147360]	Wehr, Matthias (Corresponding author) Schätzler, Sven Matthias (Corresponding author) Abel, Dirk Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Digital Process Planning for the Production of Sheet Metal Components as Prototypes and small Series with Stretch Forming and incremental Sheet Metal Forming In: New developments in sheet metal forming 2020. New developments in hydroforming 2020 / published by Mathias Liewald ; IFU, Institute for Metal Forming Technology of the University of Stuttgart, 173-180, 2020	Schmitz, Roman Ulrich Christopher (Corresponding author) Bailly, David Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Prediction of Ductile Damage in the Process Chain of Caliber Rolling and Forward Rod Extrusion In: Procedia manufacturing, 47, 649-655, 2020 [DOI: 10.1016/j.promfg.2020.04.201]	Clausmeyer, Till (Corresponding author) Schowtjak, Alexander Wang, Shuhan Gitschel, Robin Hering, Oliver et al.
[Contribution to a conference proceedings, Journal Article] Design of Caliber Rolls Incorporating Load Path Dependent Damage Evolution In: Procedia manufacturing, 47, 643-648, 2020 [DOI: 10.1016/j.promfg.2020.04.198]	Li, Xinyang (Corresponding author) Wang, Shuhan Lohmar, Johannes Hirt, Gerhard
[Journal Article] On the Influence of the Tool Path and Intrusion Depth on the Geometrical Accuracy in Incremental Sheet Forming In: Metals : open access journal, 10 (5), 661, 2020 [DOI: 10.3390/met10050661]	Kordtomeikel, Roman Ulrich Christopher (Corresponding author) Bremen, Thomas Bailly, David Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] A New Inverse Explicit Flow Curve Determination Method for Compression Tests In: Procedia manufacturing, 47, 824-830, 2020 [DOI: 10.1016/j.promfg.2020.04.257]	Vuppala, Aditya shiv Kanth (Corresponding author) Krämer, Alexander Maximilian Braun, Alexander Lohmar, Johannes Hirt, Gerhard
[Journal Article] Investigation of bond formation behaviour in composite ring rolling In: Journal of materials processing technology, 275, 116364, 2019 [DOI: 10.1016/j.jmatprotec.2019.116364]	Günther, Stefan (Corresponding author) Schwich, Gideon Hirt, Gerhard
[Journal Article] Control of residual stresses by roller leveling with regard to process stability and one-sided surface removal In: Journal of materials processing technology, 280, 116600, 2020 [DOI: 10.1016/j.jmatprotec.2020.116600]	Grüber, Markus (Corresponding author) Kümmel, Lutz Hirt, Gerhard
[Contribution to a book, Journal Article] Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion In: Production engineering, 14 (1), 33-41, 2019 [DOI: 10.1007/s11740-019-00935-x]	Schowtjak, Alexander (Corresponding author) Wang, Shuhan Hering, Oliver Clausmeyer, Till Lohmar, Johannes et al.
[Contribution to a book, Journal Article] Torsion plastometer trials to investigate the effect of non-proportional loading paths in caliber rolling on damage and performance of metal parts In: Production engineering, 14 (1), 17-32, 2020 [DOI: 10.1007/s11740-019-00949-5]	Wang, Shuhan (Corresponding author) Dunlap, Anthony Möhring, Kerstin Lohmar, Johannes Schwedt, Alexander et al.
[Journal Article] Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling In: Production engineering, 14 (1), 5-16, 2019 [DOI: 10.1007/s11740-019-00932-0]	Imran, Muhammad (Corresponding author) Afzal, Muhammad Junaid Buhl, Johannes Bambach, Markus Dunlap, Anthony et al.
[Contribution to a book, Journal Article] Potential and status of damage controlled forming processes In: Production engineering, 14 (1), 1-4, 2020 [DOI: 10.1007/s11740-019-00948-6]	Hirt, Gerhard (Corresponding author) Tekkaya, A. Erman Clausmeyer, Till Lohmar, Johannes
[Book] Damage controlled forming processes In: Production engineering, 14 (1), 1-134, 2020	Hirt, Gerhard (Editor) Tekkaya, A. Erman (Editor)
[Contribution to a book, Journal Article] Modelling of void healing in hot rolling due to recrystallization In: Production engineering, 14 (1), 43-52, 2019 [DOI: 10.1007/s11740-019-00938-8]	Li, Xinyang (Corresponding author) Liebsch, Conrad Hirt, Gerhard Lohmar, Johannes
[Journal Article] Correlating magnetic properties of ferritic NO electrical steel containing 2.4 m.%Si with hot strip microstructure In: Journal of magnetism and magnetic materials : MMM, 501, 166431, 2020 [DOI: 10.1016/j.jmmm.2020.166431]	Stoecker, Anett (Corresponding author) Leuning, Nora Hameyer, Kay Wei, Xuefei Hirt, Gerhard et al.
[Contribution to a book, Journal Article] Investigation on the influence of damage on the fatigue strength of hot rolled sheet metal In: Production engineering, 14 (1), 65-75, 2019 [DOI: 10.1007/s11740-019-00933-z]	Liebsch, Conrad (Corresponding author) Möhring, Kerstin Lohmar, Johannes Walther, Frank Hirt, Gerhard
[Journal Article] Analysis of process forces and geometrical correlations for open-die forging with superimposed manipulator displacements In: Journal of materials processing technology, 276, 116408, 2019 [DOI: 10.1016/j.jmatprotec.2019.116408]	Wolfgarten, Martin Christoph (Corresponding author) Rudolph, Fridtjof Hirt, Gerhard
[Journal Article] Analysis of the bond strength of voids closed by open-die forging In: International journal of material forming, 13 (1), 117-126, 2019 [DOI: 10.1007/s12289-019-01474-7]	Hibbe, Paul (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Design and Analysis of Freeform Shell Structures Composed of Doubly Curved Sheet Metal Panels In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 60-67, 2019	Seiter, Alex Josef (Corresponding author) Pofahl, Thorsten Christian Trautz, Martin Reitmaier, Lisa-Marie Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Manufacturing of Conically Shaped Concentrated Windings for Wheel Hub Engines by a Multi-Stage Upsetting Process In: 2019 9th International Electric Drives Production Conference (E\|DPC) : 3 and 4 December 2019, Esslingen, Germany : proceedings / E\|DPC-2019 - Electric Drives Production Conference 2019 ; sponsored by: IEEE, FAU - Friedrich Alexander Universität Erlangen-Nürnberg, IAS - IEEE Industry Applications Society, PELS - IEEE Power Electronics Society, 9011944, 7 Seiten, 2019 [DOI: 10.1109/EDPC48408.2019.9011944]	Petrell, Daniel (Corresponding author) Teller, Marco (Corresponding author) Hirt, Gerhard (Corresponding author) Borzel, Stefan (Corresponding author) Schafer, Waldemar (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Parametrization of bi-parametric friction models through inverse modelling of conical tube-upsetting tests In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere]. - B, 120002, 2019 [DOI: 10.1063/1.5112657]	Henze, Michel (Corresponding author) Teller, Marco Hirt, Gerhard
[Abstract, Contribution to a book, Contribution to a conference proceedings] Correlating magnetic properties of ferritic NO electrical steelcontaining 2.4 m.%Si with hot strip microstructure In: 24th Soft Magnetic Materials Conference : Abstracts : September 4-7, 2019, Poznań, Poland / Institute of Molecular Physics, Polish Academy of Sciences Faculty of Technical Physics, Poznan University of Technology, Polish Materials Science Society ; Edited by: P. Lesniak, B. Idzikowski, R. Czajka, A. Szajek, O-39, 57-57, 2019	Stoecker, Anett (Corresponding author) Leuning, Nora Hameyer, Kay Wei, Xuefei Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings] Influence of process conditions and pore morphology on the closure rate of pores in hot rolling of steel In: NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes : proceedings : Portsmouth, New Hampshire, USA, June, 271-274, 2019	Liebsch, Conrad (Corresponding author) Li, Xinyang Lohmar, Johannes Hirt, Gerhard
[Contribution to a conference proceedings] Fe-based Sensitivity Analysis of Flatness in Hot Heavy Plate Leveling In: [11th International Rollling Conference, IRC 2019, 2020-10-01 - 2020-10-04, Sao Paulo, Brasilien], 292,300, 2019 [DOI: 10.5151/9785-9785-32259]	Laugwitz, Marvin (Corresponding author) Jochum, Martin Scheffer, Tobias Wild, Daniel Hirt, Gerhard et al.
[Contribution to a book] The Influence of Warm Rolling on Microstructure and Deformation Behavior of High Manganese Steels In: Metals : open access journal, 14-25, 2019 [DOI: 10.18154/RWTH-2020-02909]	Haupt, Marco (Corresponding author) Müller, Max Haase, Christian Sevsek, Simon Brasche, Frederike Lina et al.
[Contribution to a book] Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels In: Metals : open access journal, 43-53, 2019 [DOI: 10.18154/RWTH-2020-02907]	Quadfasel, Angela (Corresponding author) Teller, Marco Madivala Venkateshappa, Manjunatha Haase, Christian Roters, Franz et al.
[Contribution to a book, Contribution to a conference proceedings] Characterizing multi-pass conditions for roll bonding of aluminum alloys In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere]. - A, 050014, 2019 [DOI: 10.1063/1.5112578]	Krämer, Alexander Maximilian (Corresponding author) Liu, Zhao Karhausen, Kai Aretz, Holger Teller, Marco et al.
[Book, Proceedings] Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen : Tagungsband, 2019	Hirt, Gerhard (Editor)
[Journal Article] Analysis of process limits for open-die forging with superimposed manipulator displacements in vertical direction In: Production engineering, 13 (6), 685-692, 2019 [DOI: 10.1007/s11740-019-00918-y]	Wolfgarten, Martin Christoph (Corresponding author) Reinisch, Niklas Manuel Hirt, Gerhard
[Journal Article] Investigation of void closure in open-die forging considering changing load directions In: Production engineering, 13 (6), 703-711, 2019 [DOI: 10.1007/s11740-019-00924-0]	Hibbe, Paul (Corresponding author) Wolfgarten, Martin Christoph Hirt, Gerhard
[Contribution to a book, Journal Article] Copper Clad Steel Strips Produced by a Modified Twin-Roll Casting Process In: Metals : open access journal, 9 (11), 1156, 2019 [DOI: 10.3390/met9111156]	Münster, Dennis (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Sliding Mode Control of Piezoelectric Stack Actuators for Roll Gap Adjustment in a Cold Rolling Mill In: 2019 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) / publisher: IEEE, 1207-1214, 2019 [DOI: 10.1109/AIM.2019.8868531]	Wehr, Matthias (Corresponding author) Schätzler, Sven Matthias Ionescu, Christina Abel, Dirk Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Thermal characterization of metallic surface contacts : New test rig for determination of the interfacial heat transfer coefficient at intermediate temperatures In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, Editors, 2019 [DOI: 10.1007/978-3-662-60417-5_21]	Nietsch, Jürgen Andreas (Corresponding author) Menzler, Jan Erik Hojda, Stephan Lenz, Wolfgang Phillip Teller, Marco et al.
[Contribution to a conference proceedings] Sensitivity Analysis regarding the Inverse Modelling of Conical Tube-Upsetting Tests In: [39th SENAFOR, 2019-10-02 - 2019-10-04, Porto Alegre, Brasilien], 2019	Henze, Michel (Corresponding author) Teller, Marco Hirt, Gerhard
[Journal Article] Experimental evaluation of wear protection ability of sheet metal die covers in closed-die forging In: Production engineering, 13 (5), 627-634, 2019 [DOI: 10.1007/s11740-019-00917-z]	Yu, Yingyan (Corresponding author) Alba, Diego Rafael Schaeffer, Lirio Hirt, Gerhard
[Contribution to a conference proceedings] Computer-Aided Strain Hardening Engineering for Crash Boxes of High Manganese Steels In: The 4th International Conference on Medium and High Manganese Steels ; April 1-3, 2019, Aachen, Germany : 4th HMnS / IEHK, RWTH Aachen University ; proceedings: Wolfgang Bleck, Dierk Raabe ; editing: Sonja Brühl, 295-298, 2019	Quadfasel, Angela (Corresponding author) Teller, Marco Haase, Christian Hirt, Gerhard
[Contribution to a book, Journal Article] Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels In: Metals : open access journal, 9 (7), 772, 2019 [DOI: 10.3390/met9070772]	Quadfasel, Angela (Corresponding author) Teller, Marco Madivala Venkateshappa, Manjunatha Haase, Christian Roters, Franz et al.
[Contribution to a book, Journal Article] Multi-scale surface patterning : an approach to control friction and lubricant migration in lubricated systems In: Industrial lubrication & tribology, 71 (8), 1007-1016, 2019 [DOI: 10.1108/ILT-07-2018-0273]	Grützmacher, Philipp G. (Corresponding author) Rosenkranz, Andreas Szurdak, Adam David Grüber, Markus Gachot, Carsten et al.
[Journal Article] Gezielte Lenkung des Materialflusses erweitert Formenvielfalt im Freiformschmieden In: Stahl und Eisen, 139 (5), 54-59, 2019	Wolfgarten, Martin Christoph (Corresponding author) Rudolph, Fridtjof Hirt, Gerhard Schäfer, Hanno Schwarz, Reinhard
[Contribution to a book, Journal Article] The Influence of Warm Rolling on Microstructure and Deformation Behavior of High Manganese Steels In: Metals : open access journal, 9 (7), 797, 2019 [DOI: 10.3390/met9070797]	Haupt, Marco (Corresponding author) Müller, Max Haase, Christian Sevsek, Simon Brasche, Frederike Lina et al.
[Contribution to a conference proceedings] Cold Rolling Strategies for Improving the Magnetic Properties of Non-Grain-Oriented Electrical Steel In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], 2019	Wei, Xuefei (Corresponding author) Krämer, Alexander Maximilian Hirt, Gerhard Stöcker, Anett Kawalla, Rudolph et al.
[Contribution to a conference proceedings] Application of fast models for equivalent strain, temperature and microstructure in open-die forging In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], 2019	Wolfgarten, Martin Christoph (Corresponding author) Rudolph, Fridtjof Hirt, Gerhard
[Journal Article] Hot-Gas-Bulgetest, ein neues Verfahren zur Materialprüfung für das Presshärten von Stahl In: Stahl und Eisen, 139 (6), 26-29, 2019	Braun, Alexander (Corresponding author) Hirt, Gerhard Matthiesen, Gunnar
[Journal Article] Parametrisierung moderner Reibmodelle In: Umformtechnik, 4, 22-23, 2019	Henze, Michel (Corresponding author) Hirt, Gerhard Teller, Marco
[Contribution to a book, Journal Article] Umformtechnik für die Elektromobilität In: RWTH-Themen : Forschungsmagazin, 2019 (1), 40-47, 2019 [DOI: 10.18154/RWTH-2019-05676]	Hirt, Gerhard Hojda, Stephan Petrell, Daniel (Corresponding author) Wei, Xuefei
[Journal Article] AixViPMaP® : an Operational Platform for Microstructure Modeling Workflows In: Integrating materials and manufacturing innovation, 8 (2), 122-143, 2019 [DOI: 10.1007/s40192-019-00138-3]	Koschmieder, Lukas Hojda, Stephan Apel, M. Altenfeld, R. Bami, Y. et al.
[Contribution to a conference proceedings, Journal Article] Enhanced springback prediction for bending of high-strength spring steel using material data from an inverse modelling approach In: Procedia manufacturing, 29, 153-160, 2019 [DOI: 10.1016/j.promfg.2019.02.120]	Mertin, Chris Frederic (Corresponding author) Stellmacher, Thomas Schmitz, Roman Ulrich Christopher Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] A semi-analytical model for inverse identification of cyclic material data from measured forces during roller levelling In: Procedia manufacturing, 29, 420-427, 2019 [DOI: 10.1016/j.promfg.2019.02.157]	Grüber, Markus (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Comparison of Different Upsetting Processes for the Production of Copper Coils for Wheel Hub Engines In: Advances in production research : proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh, editors, 2018 [DOI: 10.1007/978-3-030-03451-1_44]	Petrell, Daniel (Corresponding author) Braun, Alexander Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Industrial Application of Incremental Sheet Forming In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 399-408, 2019	Schmitz, Roman Ulrich Christopher (Corresponding author) Hirt, Gerhard Bailly, David
[Contribution to a book, Contribution to a conference proceedings] Richtwalzen zur gezielten Einstellung von Eigenspannungen in Bandmaterial In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 339-346, 2019	Grüber, Markus (Corresponding author) Hirt, Gerhard Kümmel, Lutz
[Contribution to a book, Contribution to a conference proceedings] Verbesserung der Dickentoleranz beim Walzen durch Einsatz piezoelektrischer Aktuatoren In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 319-328, 2019	Stockert, Sven Matthias (Corresponding author) Hirt, Gerhard Wehr, Matthias Abel, Dirk
[Contribution to a book, Contribution to a conference proceedings] Verbundringwalzen : Simulation und Experiment zur Herstellung nahtloser Verbundringe In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 297-306, 2019	Günther, Stefan (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Computergestütztes "Strain Hardening Engineering" für Crashboxen aus hoch Mangan Stahl In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 265-274, 2019	Quadfasel, Angela (Corresponding author) Teller, Marco Hirt, Gerhard Haase, Christian
[Contribution to a book, Contribution to a conference proceedings] Effiziente Richtstrategien basierend auf Data-Mining und Modellierung In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 245-254, 2019	Laugwitz, Marvin (Corresponding author) Lohmar, Johannes Hirt, Gerhard Jochum, Martin Scheffer, Tobias et al.
[Contribution to a book, Contribution to a conference proceedings] Einfluss des Kaltwalz- und Wärmebehandlungsprozesses auf die Mikrostruktur und Textur von nicht kornorientiertem Elektroblech In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 189-198, 2019	Wei, Xuefei (Corresponding author) Krämer, Alexander Maximilian Hirt, Gerhard Heller, Martin Korte-Kerzel, Sandra
[Contribution to a book, Contribution to a conference proceedings] Herstellung selbstentfaltender metalischer Hohlprofile In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 169-178, 2019	Pavliuchenko, Pavlo (Corresponding author) Bremen, Thomas Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Prozesskette aus Streckziehen und Inkrementeller Blechumformung für die Fertigung mehrsinnig gekrümmter Feinblechpaneele In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 147-156, 2019	Reitmaier, Lisa-Marie (Corresponding author) Bailly, David Hirt, Gerhard Pofahl, Thorsten Christian Seiter, Alex Josef et al.
[Contribution to a book, Contribution to a conference proceedings] New incremental Twist Forging In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 111-120, 2019	Makiyama, T. (Corresponding author) Yagami, T. Teramae, T. Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Erweiterte Formenvielfalt im Freiformschmieden durch gezielte Lenkung des Materialflusses In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 101-110, 2019	Wolfgarten, Martin Christoph (Corresponding author) Rudolph, Fridtjof Hirt, Gerhard Schwarz, R. Schäfer, H.
[Contribution to a book, Contribution to a conference proceedings] Digitale Schatten in der Umformtechnik : Potenziale und Herausforderungen In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 19-28, 2019	Hirt, Gerhard (Corresponding author)
[Contribution to a conference proceedings] Impact of warm rolling on microstructure and mechanical properties of high manganese steels In: The 4th International Conference on Medium and High Manganese Steels ; April 1-3, 2019, Aachen, Germany : 4th HMnS / IEHK, RWTH Aachen University ; proceedings: Wolfgang Bleck, Dierk Raabe ; editing: Sonja Brühl, 95-98, 2019	Haupt, Marco (Corresponding author) Müller, Max Haase, Christian Sevsek, Simon Schwedt, Alexander et al.
[Journal Article] Investigation of applying protective sheet metal die covers for hot forging dies on a cross-forging geometry In: The international journal of advanced manufacturing technology, 102 (1/4), 999-1007, 2019 [DOI: 10.1007/s00170-018-03250-4]	Yu, Yingyan (Corresponding author) Zottis, Juliana Wolfgarten, Martin Christoph Hirt, Gerhard
[Contribution to a book, Journal Article] Production of bistable fully closed metallic shells by introducing residual stresses during bending processes In: Production engineering, 13 (2), 201-209, 2019 [DOI: 10.1007/s11740-019-00875-6]	Pavliuchenko, Pavlo (Corresponding author) Teller, Marco Grüber, Markus Bremen, Thomas Hirt, Gerhard
[Contribution to a book, Journal Article] A Semianalytical Model for the Determination of Bistability and Curvature of Metallic Cylindrical Shells In: Journal of manufacturing and materials processing, 3 (1), 22, 2019 [DOI: 10.3390/jmmp3010022]	Pavliuchenko, Pavlo (Corresponding author) Teller, Marco Grüber, Markus Hirt, Gerhard
[Journal Article] Entwicklung eines Hochtemperatur-Bulgetests : Verbesserte Materialcharakterisierung für die Warmblechumformung In: wt Werkstattstechnik online, 2019 (1/2), 100-104, 2019	Braun, Alexander (Corresponding author) Matthiesen, Gunnar Hirt, Gerhard
[Journal Article] New approach for the optimization of pass-schedules in open-die forging In: International journal of material forming, 12 (6), 973-983, 2019 [DOI: 10.1007/s12289-019-01471-w]	Wolfgarten, Martin Christoph (Corresponding author) Rosenstock, Dirk Rudolph, Fridtjof Hirt, Gerhard
[Journal Article] Leichtbau durch lokale Wärmebehandlung kaltgewalzter Stähle In: Lightweight design, 11 (6), 58-63, 2018 [DOI: 10.1007/s35725-018-0068-1]	Conrads, Laura (Corresponding author) Hirt, Gerhard Hama-Seleh, Rebar Weisheit, Andreas
[Journal Article] Werkstoffverbunde ermöglichen anforderungsgerechte Ringe In: Industrie-Anzeiger, 2018 (10), 52-53, 2018	Günther, Stefan (Corresponding author) Hirt, Gerhard
[Journal Article] Numerisch unterstützte Bewertung von Einflussgrößen beim Ringwalzen In: Massivumformung, 9, 72-76, 2018	Schwich, Gideon (Corresponding author) Hirt, Gerhard Günther, Stefan
[Contribution to a conference proceedings] Investigation of texture evolution during rolling process of non-oriented Si based electrical steels with 2D and 3D RVEs In: [6th European Conference on Computational Mechanics (ECCM 6), 7thEuropean Conference on Computational Fluid Dynamics (ECFD 7), 2018-06-11 - 2018-06-15, Glasgow, Scotland], 1428-1438, 2018	Vuppala, Aditya Shiv Kanth (Corresponding author) Wei, Xuefei Hojda, Stephan Teller, Marco Hirt, Gerhard
[Journal Article] Low-loss FeSi sheet for energy-efficient electrical drives In: AIMS Materials Science, 5 (6), 1184-1198, 2018 [DOI: 10.3934/matersci.2018.6.1184]	Kawalla, Rudolf Stöcker, Anett (Corresponding author) Prahl, Ulrich Wei, Xuefei Dierdorf, Jens et al.
[Journal Article] Vollautomatische Charakterisierung der Ebenheit von Grobblech In: Stahl und Eisen, 138 (10), 39-44, 2018	Laugwitz, Marvin (Corresponding author) Lohmar, Johannes Hirt, Gerhard Seuren, Simon Jochum, Martin
[Journal Article] Formschlüssige Anbindung von Aluminium an strukturierte Stahlbleche im Druckgießprozess In: International aluminium journal, 12, 60-62, 2018	Senge, Stefan (Corresponding author) Brachmann, Johannes Bührig-Polaczek, Andreas Hirt, Gerhard
[Journal Article] Comprehensive procedure for the design of rolling schedules for roll bonding In: International aluminium journal, 94, 57-59, 2018	Liu, Zhao (Corresponding author) Krämer, Alexander Maximilian Karhausen, Kai Friedrich Aretz, Holger Teller, Marco et al.
[Contribution to a book, Contribution to a conference proceedings] Low-loss FeSi sheet for energy-efficient electrical drives In: WMM'18 : 8th International Conference on Magnetism and Metallurgy : Dresden, Germany, June 12th to 14th, 2018 : proceedings / Technische Universität Bergakademie Freiberg [und andere]. - 2 Bände, 20-33, 2018	Kawalla, Rudolf Stöcker, Anett (Corresponding author) Prahl, Ulrich Wei, Xuefei Dierdorf, Jens et al.
[Contribution to a book, Contribution to a conference proceedings] Model Predictive Roll Gap Control in Cold Rolling with Piezoelectric Actuators In: 2018 IEEE Conference on Control Technology and Applications (CCTA) : 21-24 Aug. 2018 / publisher: IEEE ; general chair: Jakob Stoustrup (Aalborg University), 1377-1382, 2018 [DOI: 10.1109/CCTA.2018.8511333]	Wehr, Matthias (Corresponding author) Stockert, Sven Matthias Abel, Dirk Hirt, Gerhard
[Contribution to a conference proceedings] Pass-schedule calculation with integrated prediction of temperature, equivalent strain and microstructure in hot open-die forging In: Ingot casting, rolling, forging 2018 : ICRF : 3rd international conference : 16-19 October 2018, Stockholm, Sweden : full proceedings book / official organiser: Jernkontoret, 67-76, 2018	Wolfgarten, Martin Christoph (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] SFB 761 Stahl - ab initio: Prozessentwicklung für hoch Mangan Stähle In: Metallurgie im Wandel 4.0 : 32. Aachener Stahlkolloquium, 13.-14. September 2018, Tivoli Aachen, Tagungsband / Dieter Senk (Hrsg.) ; Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, Rheinisch-Westfälische Technische Hochschule Aachen, 169-181, 2018	Kurenbach, Svenja (Corresponding author) Quadfasel, Angela Brasche, Frederike Lina Haupt, Marco Haase, Christian et al.
[Contribution to a book, Contribution to a conference proceedings] Modellierung von Produkteigenschaften beim Walzen : Zielgrößengerechte Modellauswahl für Mikrostruktur, Textur und Oberfläche In: Metallurgie im Wandel 4.0 : 32. Aachener Stahlkolloquium, 13.-14. September 2018, Tivoli Aachen, Tagungsband / Dieter Senk (Hrsg.) ; Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, Rheinisch-Westfälische Technische Hochschule Aachen, 262-272, 2018	Hirt, Gerhard (Corresponding author) Hojda, Stephan Krämer, Alexander Maximilian Teller, Marco Wei, Xuefei
[Contribution to a conference proceedings] Industrial Application Potential of Incremental Sheet Forming In: [38th Senafor, 2018-10-03 - 2018-10-05, Porto Alegre, Brasilien], 2018	Schmitz, Roman Ulrich Christopher (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium In: 5th International Conference on New Forming Technology (ICNFT 2018) : Bremen, Germany, September 18-21, 2018 / F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan (eds.), 14010, [1]-7, 2018 [DOI: 10.1051/matecconf/201819014010]	Teller, Marco (Corresponding author) Roß, Ingo Prünte, Stephan Temmler, André Küpper, Moritz Emanuel et al.
[Journal Article] Prozessgrenzen beim Walzplattieren besser verstehen In: Werkstoffe in der Fertigung, 05, 26-27, 2018	Simon, Paul (Corresponding author) Melzner, Alina Hirt, Gerhard
[Journal Article] Schnelle Karosserien In: Blech, 5, 76-79, 2018	Schmitz, Roman Ulrich Christopher (Corresponding author) Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Interdisciplinary Data Driven Production Process Analysis for the Internet of Production In: Procedia manufacturing, 26, 1065-1076, 2018 [DOI: 10.1016/j.promfg.2018.07.143]	Meyes, Richard (Corresponding author) Tercan, Hasan Thiele, Thomas David Krämer, Alexander Maximilian Heinisch, Julian et al.
[Contribution to a conference proceedings, Journal Article] Investigation of correlation between material properties, process parameters and residual stresses in roller levelling In: Procedia manufacturing, 15, 2018 [DOI: 10.1016/j.promfg.2018.07.180]	Grüber, Markus (Corresponding author) Hirt, Gerhard
[Contribution to a conference proceedings] Finite element analysis of caliber rolling processes to investigate possibilities to influence the damage evolution In: [11th Forming Technology Forum Zürich 2018, 2018-07-02 - 2018-07-03, Zürich, Schweiz], 108-112, 2018	Wang, Shuhan (Corresponding author) Pöplau, Julia Grüber, Markus Hirt, Gerhard
[Contribution to a conference proceedings] Numerical investigation on damage evolution and void closure in hot flat rolling In: [11th Forming Technology Forum Zürich 2018, 2018-07-02 - 2018-07-03, Zürich, Schweiz], 101-107, 2018	Liebsch, Conrad (Corresponding author) Hirt, Gerhard
[Contribution to a book, Journal Article] Investigation of Friction Conditions in Dry Metal Forming of Aluminum by Extended Conical Tube-Upsetting Test In: Key engineering materials, 767, 189-195, 2018 [DOI: 10.4028/www.scientific.net/KEM.767.189]	Teller, Marco (Corresponding author) Ross, Ingo Temmler, André Poprawe, Reinhart Prünte, Stephan et al.
[Contribution to a book, Journal Article] A New Coupled Thermal Stress FE-Model for Investigating the Influence of Non-Isothermal Conditions on Bond Strength and Bonding Status of the First Pass in Roll Bonding In: Key engineering materials, 767, 301-308, 2018 [DOI: 10.4028/www.scientific.net/KEM.767.301]	Liu, Zhao (Corresponding author) Krämer, Alexander Maximilian Karhausen, Kai Friedrich Aretz, Holger Teller, Marco et al.
[Journal Article] Improving the thickness accuracy of cold rolled narrow strip by piezoelectric roll gap control at high rolling speed In: CIRP annals, manufacturing technology, 67 (1), 313-316, 2018 [DOI: 10.1016/j.cirp.2018.04.107]	Stockert, Sven Matthias (Corresponding author) Wehr, Matthias Lohmar, Johannes Hirt, Gerhard Abel, Dirk
[Journal Article] From lab to application : Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns In: Tribology international, 127, 500-508, 2018 [DOI: 10.1016/j.triboint.2018.06.036]	Grützmacher, Philipp G. (Corresponding author) Rosenkranz, Andreas Szurdak, Adam König, Florian Jacobs, Georg et al.
[Contribution to a book, Contribution to a conference proceedings] Evaluation of interlocking bond strength between structured 1.0338 steel sheets and high pressure die cast AlMg5Si2 In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro (University of Palermo, Palermo, Italy). - A, 2018 [DOI: 10.1063/1.5034873]	Senge, Stefan (Corresponding author) Brachmann, Johannes Hirt, Gerhard Bührig-Polaczek, Andreas
[Contribution to a book, Contribution to a conference proceedings] Homogenisation of the strain distribution in stretch formed parts to improve part properties In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro (University of Palermo, Palermo, Italy). - B, 2018 [DOI: 10.1063/1.5035051]	Schmitz, Roman Ulrich Christopher (Corresponding author) Winkelmann, Mike Bailly, David Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Cold rolling of coated steel sheets as pretreatment for hybrid components In: Hybrid Materials and Structures : Proceedings 3. Internationale Konferenz : 18.-19. April 2018, Bremen, ATLANTIC Hotel Universum / DGM ; Conference chairs and editors: Prof. Dr.-Ing. Joachim M. Hausmann, Institut für Verbundwerkstoffe GmbH, Kaiserslautern ; Prof.-Ing. Marc Siebert, PFH - Private Hochschule Göttingen, Dr.-Ing. Axel von Hehl, Leibniz-Institut für Werkstofforientierte Technologien - IWT, Bremen, 290-295, 2018	Senge, Stefan (Corresponding author) Gerdt, Leonid Wiesner, Stefanie Öte, Mehmet Bobzin, Kirsten et al.
[Journal Article] Lubricant migration on stainless steel induced by bio-inspired multi-scale surface patterns In: Materials and design, 150, 55-63, 2018 [DOI: 10.1016/j.matdes.2018.04.035]	Grützmacher, Philipp G. (Corresponding author) Rosenkranz, Andreas Szurdak, Adam Gachot, Carsten Hirt, Gerhard et al.
[Journal Article] Effects of Multi‐Scale Patterning on the Run‐In Behavior of Steel-Alumina Pairings under Lubricated Conditions In: Advanced engineering materials, 20 (1), 1700521, 2017 [DOI: 10.1002/adem.201700521]	Grützmacher, Philipp G. (Corresponding author) Rosenkranz, Andreas Szurdak, Adam Gachot, Carsten Hirt, Gerhard et al.
[Contribution to a conference proceedings] Near-net shape open-die forging of complex workpieces through superimposed manipulator displacements In: [8th JSTP International Seminar on Precision Forging, 2018-03-05 - 2018-03-08, Nagoyo, Japan], 89-93, 2018	Wolfgarten, Martin Christoph (Corresponding author) Hirt, Gerhard
[Journal Article] Einfluss des Handpolierens von Probenkörpern auf Gestaltabweichungen erster Ordnung und das Verschleißverhalten in Tribometerversuchen In: Dry metal forming open access journal, 4, 31-34, 2018	Teller, Marco (Corresponding author) Hirt, Gerhard Roß, Ingo Küpper, Moritz Emanuel Temmler, André et al.
[Journal Article] Guiding lubricant on stainless steel surfaces by channel-like structures fabricated by roller- and micro-coining In: Physica / A, 505, 482-489, 2018 [DOI: 10.1016/j.physa.2018.03.035]	Grützmacher, Philipp G. (Corresponding author) Rosenkranz, Andreas Atalay, Emre Szurdak, Adam Gachot, Carsten et al.
[Journal Article] Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel In: AIP Advances, 8 (4), 047601, 2017 [DOI: 10.1063/1.4994143]	Leuning, Nora (Corresponding author) Steentjes, Simon Stöcker, Anett Kawalla, Rudolf Wei, Xuefei et al.
[Journal Article] Friction Reduction Induced by Elliptical Surface Patterns under Lubricated Conditions In: Advanced engineering materials, 20 (3), 1700731, 2017 [DOI: 10.1002/adem.201700731]	Rosenkranz, Andreas (Corresponding author) Szurdak, Adam Grützmacher, Philipp G. Hirt, Gerhard Mücklich, Frank
[Journal Article] Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging In: International journal of material forming, 11 (4), 471-477, 2017 [DOI: 10.1007/s12289-017-1356-5]	Laugwitz, Marvin (Corresponding author) Voswinckel, H. Hirt, Gerhard Bambach, M.
[Contribution to a book, Contribution to a conference proceedings] Reparaturstrategie für automobile CFK-Strukturbauteile In: Energie/Effiziente Verarbeitung zukunftsweisender LeichtbauWerkstoffe : belastbare Materialien, hybride Strukturen : Tagungsband T44 des 37. EFB-Kolloquiums Blechverarbeitung 2017 am 28. und 29. März 2017 in Fellbach / Europäische Forschungsgesellschaft für Blechverabeitung (Hg.), 83-92, 2017	Bier, Stefanie (Corresponding author) Schoft, Julia (Corresponding author) Schiebahn, Alexander Reisgen, Uwe Hirt, Gerhard et al.
[Contribution to a conference proceedings] Process integrated production of complex workpieces in open-die forging In: 20th International Forgemasters Meeting - IFM 2017 : Monday, 11 September 2017-Friday, 15 September 2017, Congress Graz, Austria : proceedings / [The Austrian Society for Metallurgy and Materials (ASMET)], 665-674, 2017	Wolfgarten, Martin Christoph (Corresponding author) Hibbe, Paul Hirt, Gerhard
[Contribution to a conference proceedings] Modelling of microstructure and damage in ring rolling In: 20th International Forgemasters Meeting - IFM 2017 : Monday, 11 September 2017-Friday, 15 September 2017, Congress Graz, Austria : proceedings / [The Austrian Society for Metallurgy and Materials (ASMET)], 580-589, 2017	Schwich, Gideon (Corresponding author) Seitz, Joachim Friedhelm Guenther, Stefan Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Flatness characterisation of hot plates for plate levelling In: European Steel Technology and Application Days 2017 - ESTAD 2017 : Monday 26 June 2017-Thursday 29 June 2017 : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2097-2103, 2017	Laugwitz, Marvin (Corresponding author) Seuren, Simon Jochum, Martin Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] A feed-forward control for roller levelers using FE based process models and fast meta-models In: European Steel Technology and Application Days 2017 - ESTAD 2017 : Monday 26 June 2017-Thursday 29 June 2017 : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2111-2116, 2017	Grüber, Markus (Corresponding author) Oligschäger, Marius Hirt, Gerhard
[Contribution to a book] Integrated Computational Materials and Production Engineering (ICMPE) In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 253-364, 2017 [DOI: 10.1007/978-3-319-47452-6_5]	Bleck, Wolfgang Brecher, Christian Herty, Michael Hirt, Gerhard Hopmann, Christian et al.
[Contribution to a book] Multi-technology Platforms (MTPs) In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 369-514, 2017 [DOI: 10.1007/978-3-319-47452-6_6]	Brecher, Christian (Corresponding author) Bleck, Wolfgang Feldhusen, Jörg Hirt, Gerhard Klocke, Fritz et al.
[Journal Article] Wear behavior of micro-coined steel surfaces under mixed lubrication In: Industrial lubrication & tribology, 69 (6), 1033-1039, 2017 [DOI: 10.1108/ILT-11-2015-0167]	Rosenkranz, Andreas Khan, Saad Ahmed Szurdak, Adam Hirt, Gerhard Gachot, Carsten
[Contribution to a conference proceedings] Remeshing framework for a multiphysics FEM solver exemplified by a damage sensitive extrusion process In: 37º SENAFOR : Pôrto Alegre/RS, 4, 5 e 6 de outubro de 2017 / editado por: Prof. Dr. Eng. Lirio Schaeffer, Prof. Dr. Alexandre da Silva Rocha, 2017	Hojda, Stephan (Corresponding author) Sturm, Karl J. X. Teller, Marco Hirt, Gerhard
[Abstract, Contribution to a conference proceedings] Impact of the Interaction of Material Production and Mechanical Processing on the Magnetic Properties of Non-oriented Electrical Steel In: Abstracts / 23rd Soft Magnetic Materials Conference : SMM 2017 : Universidad de Sevilla : [10-13 September 2017], 32-33, 2017	Hameyer, Kay Leuning, Nora Steentjes, Simon Stöcker, Anett Kawalla, Rudolf et al.
[Contribution to a conference proceedings, Journal Article] Development of levelling strategies for heavy plates via controlled FE models In: Procedia engineering, 207, 1349-1354, 2017 [DOI: 10.1016/j.proeng.2017.10.895]	Laugwitz, Marvin (Corresponding author) Seuren, Simon Jochum, Martin Hojda, Stephan Lohmar, Johannes et al.
[Contribution to a conference proceedings, Journal Article] Numerical and experimental investigations on the springback behaviour of stamping and bending parts In: Procedia engineering, 207, 1635-1640, 2017 [DOI: 10.1016/j.proeng.2017.10.1091]	Mertin, Chris Frederic (Corresponding author) Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] A strategy for the controlled setting of flatness and residual stress distribution in sheet metals via roller levelling In: Procedia engineering, 207, 1332-1337, 2017 [DOI: 10.1016/j.proeng.2017.10.892]	Grüber, Markus (Corresponding author) Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Investigations on Springback in High Manganese TWIP-Steels using U-Profile Draw Bending In: Procedia engineering, 207, 1582-1587, 2017 [DOI: 10.1016/j.proeng.2017.10.1052]	Quadfasel, Angela (Corresponding author) Lohmar, Johannes Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Increasing the energy absorption capacity of structural components made of low alloy steel by combining strain hardening and local heat treatment In: Procedia engineering, 207, 257-262, 2017 [DOI: 10.1016/j.proeng.2017.10.771]	Conrads, Laura (Corresponding author) Liebsch, Conrad Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Investigation of a composite ring rolling process considering bonding behaviour in FEM and experiment In: Procedia engineering, 207, 1236-1241, 2017 [DOI: 10.1016/j.proeng.2017.10.876]	Guenther, Stefan (Corresponding author) Seitz, Joachim Friedhelm Schwich, Gideon Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Damage dependent material properties in a Finite Element Simulation of a hybrid forward extrusion process In: Procedia engineering, 207, 437-441, 2017 [DOI: 10.1016/j.proeng.2017.10.801]	Hojda, Stephan (Corresponding author) Sturm, Karl J. X. Terhorst, Michael Klocke, Fritz Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Influence of Intercritical Annealing on Microstructure and Mechanical Properties of a Medium Manganese Steel In: Procedia engineering, 207, 1803-1808, 2017 [DOI: 10.1016/j.proeng.2017.10.942]	Haupt, Marco (Corresponding author) Dutta, Aniruddha Ponge, Dirk Sandlöbes, Stefanie Nellessen, Monika et al.
[Contribution to a book, Contribution to a conference proceedings] Online-coupled FE simulation and microstructure prediction for the process chain of an Inconel 718 turbine disk In: 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017 / Herausgeber: Robert Schmitt, Günther Schuh, 3-10, 2017	Krämer, Alexander Maximilian (Corresponding author) Rabindran, Rajeevan Rott, Anna Kumar, Ranjett Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Investigations on the Elongation Differences of Aluminum in Two Layer Roll Bonding In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 190015, 1-6, 2017 [DOI: 10.1063/1.5008228]	Melzner, Alina (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Assessment of Flat Rolling Theories for the Use in a Model-Based Controller for High-Precision Rolling Applications In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 190005, 1-6, 2017 [DOI: 10.1063/1.5008218]	Stockert, Sven Matthias (Corresponding author) Wehr, Matthias Lohmar, Johannes Abel, Dirk Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Interlocking Multi-Material Components made of Structured Steel Sheets and High-Pressure Die Cast Aluminium In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 190007, 1-6, 2017 [DOI: 10.1063/1.5008220]	Senge, Stefan (Corresponding author) Brachmann, Johannes Hirt, Gerhard Bührig-Polaczek, Andreas
[Contribution to a book, Contribution to a conference proceedings] Influence of transient strain rates on material flow stress and microstructure evolution In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 160004, 1-6, 2017 [DOI: 10.1063/1.5008179]	Dierdorf, Jens (Corresponding author) Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Tribological investigations of the applicability of surface functionalization for dry extrusion processes In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 140001, 1-6, 2017 [DOI: 10.1063/1.5008157]	Teller, Marco (Corresponding author) Prünte, Stephan Ross, Ingo Temmler, André Schneider, Jochen M. et al.
[Contribution to a book, Contribution to a conference proceedings] Model for texture evolution in cold rolling of 2.4 wt.-% Si non-oriented electrical steel In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 170005, 1-6, 2017 [DOI: 10.1063/1.5008203]	Wei, Xuefei (Corresponding author) Hojda, Stephan Dierdorf, Jens Lohmar, Johannes Hirt, Gerhard
[Contribution to a book] Profitability Assessment as a Contribution to the Theory of Production In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, Chapter 6: Multi-technology Platforms, 495-513, 2017	Brecher, Christian Hirt, Gerhard (Corresponding author) Klocke, Fritz Reisgen, Uwe Conrads, Laura et al.
[Contribution to a book, Contribution to a conference proceedings] Controllable friction in lubricated systems by a multi-scale approach combining direct laser interference patterning and micro-coining In: Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen ; 58. Tribologie-Fachtagung, 25. - 27. September 2017 in Göttingen / Herausgeber und Vertrieb: Gesellschaft für Tribologie e.V. - Sonderband: Abschlusskolloquium "Ressourceneffiziente Konstruktionselemente" SPP 1551 der DFG, 95-110, 2017	Grützmacher, P. (Corresponding author) Szurdak, Adam Rosenkranz, Andreas Grüber, Markus Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings] Investigation on the cold rolling and structuring of cold sprayed copper-coated steel sheets In: Tagungsband zum 19. Werkstofftechnischen Kolloquium in Chemnitz : 16. und 17. März 2017 / Hrsg.: Univ.-Prof. Dr.-Ing. habil. T. Lampke ; Univ.-Prof. Dr.-Ing. G. Wagner ; Univ.-Prof. Dr.-Ing. habil. M.F.-X Wagner ; TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik, 236-246, 2017	Bobzin, Kirsten Öte, Mehmet Wiesner, Stefanie Gerdt, Leonid Senge, Stefan et al.
[Contribution to a book, Contribution to a conference proceedings] Investigation on the cold rolling and structuring of cold sprayed copper-coated steel sheets In: 19th Chemnitz Seminar on Materials Engineering : 16-17 March 2017, Chemnitz, Germany, 012028, 1-11, 2017 [DOI: 10.1088/1757-899X/181/1/012028]	Bobzin, Kirsten Öte, Mehmet Wiesner, Stefanie Gerdt, Leonid (Corresponding author) Senge, Stefan et al.
[Abstract, Contribution to a book, Contribution to a conference proceedings] Hochpräzises Walzen durch Integration piezoelektrischer Stapelaktoren : Vorstellung des Automatisierungskonzeptes, der Regelung und erster Walzergebnisse in einem Hochpräzisionswalzwerk zur Herstellung von dünnen, metallischen Bändern In: Automation 2017 : technology networks processes : 18. Leitkongress der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 27. und 28. Juni 2017 / VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 15-16, 2017 [DOI: 10.51202/9783181022931-15]	Wehr, Matthias (Corresponding author) Stockert, Sven Matthias Abel, Dirk Hirt, Gerhard
[Journal Article] Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium In: Dry metal forming open access journal, 3, 073-080, 2017	Teller, Marco (Corresponding author) Hirt, Gerhard Roß, Ingo Temmler, André Poprawe, Reinhart et al.
[Journal Article] Improvement of the dishing process in ring rolling using conical guide rolls In: Production engineering, 11 (1), 29-39, 2017 [DOI: 10.1007/s11740-016-0707-2]	Seitz, Joachim Friedhelm (Corresponding author) Kordtomeikel, Frauke Carole Hirt, Gerhard
[Journal Article] On the growth of intermetallic phases by heat treatment of friction stir welded aluminum steel joints In: Production engineering, 11 (2), 175-182, 2017 [DOI: 10.1007/s11740-017-0712-0]	Naumov, Andreas (Corresponding author) Mertin, Chris Frederic Korte, Frederik Hirt, Gerhard Reisgen, Uwe
[Journal Article] Decreasing friction during Al cold forming using a nanomolecular layer In: Journal of vacuum science & technology : JVST / A, Vacuum, surfaces, and films, 35 (2), 020605, 2017 [DOI: 10.1116/1.4972515]	Prünte, Stephan (Corresponding author) Music, Denis Schneider, Jochen M. Teller, Marco Hirt, Gerhard et al.
[Contribution to a book] Demonstrator Conductive Friction Stir Welding (FSW) Center In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, Chapter 6: Multi-technology Platforms (MTPs), 442-466, 2017	Hirt, Gerhard Reisgen, Uwe Bleck, Wolfgang Bambach, Markus Schiebahn, Alexander et al.
[Contribution to a book] Demonstrator Hybrid Sheet Metal Processing Center In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, Chapter 6: Multi-technology Platforms (MTPs), 419-442, 2017	Bleck, Wolfgang Bailly, David Bambach, Markus Conrads, Laura Göttmann, Alexander et al.
[Journal Article] Processing of Clad Steel Strips Consisting of a High Manganese and Stainless Steel Pairing Produced by Twin-Roll Casting In: Steel research international, 88 (1), 1600285, 2016 [DOI: 10.1002/srin.201600285]	Münster, Dennis (Corresponding author) Zhang, Bowen Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Untersuchungen zur Verbindungsentstehung beim Warmwalzplattieren von Aluminium In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Achen ; Tagungsband / Gerhard Hirt (Hrsg.) ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 207-216, 2016	Karhausen, Kai Friedrich (Corresponding author) Janssen, Hartmut Georg Pietryga, Michael P. Lohmar, Johannes Hirt, Gerhard
[Journal Article] Krumme Dinger mittels Freiformschmieden In: Maschinenmarkt, 49, 28-30, 2016	Wolfgarten, Martin Christoph (Corresponding author) Hibbe, Paul Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Rapid Control Prototyping in Cold Rolling using Piezoelectric Actuators In: IFAC-PapersOnLine, 49 (31), 55-60, 2016 [DOI: 10.1016/j.ifacol.2016.12.161]	Wehr, Matthias (Corresponding author) Stockert, Sven Matthias Abel, Dirk Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Investigation of Springback of High Manganese TWIP-Steels Using Three-Point-Bending In: Proceedings of the 1st International Conference on Automobile Steel(ICAS 2016) & the 3rd International Conference on High Manganese Steels (HMnS) : Chengdu, China, November 16-18, 2016 / organized by the Chinese Society for Metals, Central Iron and Steel Research Institute, 2016	Quadfasel, Angela (Corresponding author) Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Investigation of a Production Route for Medium Manganese High Strength Steels Based on Twin-Roll Strip Casting In: Proceedings of the 1st International Conference on Automobile Steel(ICAS 2016) & the 3rd International Conference on High Manganese Steels (HMnS) : Chengdu, China, November 16-18, 2016 / organized by the Chinese Society for Metals, Central Iron and Steel Research Institute, 2016	Haupt, Marco (Corresponding author) Daamen, Markus Offermanns, Nico Hirt, Gerhard
[Journal Article] Abschätzung der umformtechnischen Grenzen des schmierstofffreien Kaltfließpressens von Aluminium anhand von Tribometerversuchen In: Dry metal forming open access journal, 2, 56-61, 2016 [DOI: 10.18154/RWTH-2017-01822]	Teller, Marco (Corresponding author) Hirt, Gerhard Roß, Ingo Poprawe, Reinhart Prünte, Stephan
[Contribution to a book, Contribution to a conference proceedings] Self-Supporting Free-Form Structures Made of Individual Sheet Metal Panels In: [11th Conference on Advanced Building Skins, ABS, 10.10.2016-11.10.2016, Bern, Switzerland], 2016	Pofahl, Thorsten Christian (Corresponding author) Bailly, David Schmitz, Roman Ulrich Christopher Trautz, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Low-loss FeSi sheet for energy-efficient electrical drives In: 7th International Conference on Magnetism and Metallurgy (WMM) : Rome, Italy, June 13th-15th, 2016 / co-sponsored by UK Magnetics Society, Associazione Italiana Metallurgia, 2016	Kawalla, Rudolf (Corresponding author) Stöcker, Anett Grigoleit, Jens Wei, Xuefei Dierdorf, Jens et al.
[Contribution to a book, Contribution to a conference proceedings] Improving the crash behavior of structural components made of advanced high strength steel by local heat treatment In: [Conference on Challenges in Forming High-Strength sheets, IDDRG2016, 12.06.2016-15.06.2016, Linz, Austria], 012024, 1-8, 2016 [DOI: 10.1088/1757-899X/159/1/012024]	Conrads, Laura (Corresponding author) Daamen, Markus Hirt, Gerhard Bambach, Markus
[Contribution to a conference proceedings] Microstructure and damage calculation in ring rolling In: [36. Senafor - 20. International Forging Conference, 05.10.2016-07.10.2016, Porto Alegre, Brasilien], 2016	Schwich, Gideon (Corresponding author) Rabindran, Rajeevan Seitz, Joachim Friedhelm Hirt, Gerhard
[Journal Article] Enhancing the crashworthiness of high-manganese steel by strain-hardening engineering, and tailored folding by local heat-treatment In: Materials & design, 110, 157-168, 2016 [DOI: 10.1016/j.matdes.2016.07.065]	Bambach, Markus (Corresponding author) Conrads, Laura (Corresponding author) Daamen, Markus (Corresponding author) Güvenc, Onur (Corresponding author) Hirt, Gerhard (Corresponding author)
[Contribution to a conference proceedings, Journal Article] Closed-loop control of product properties in metal forming In: CIRP annals, manufacturing technology, 65 (2), 573-596, 2016 [DOI: 10.1016/j.cirp.2016.06.002]	Allwood, J. M. (Corresponding author) Duncan, S. R. Cao, J. Groche, P. Hirt, Gerhard et al.
[Journal Article] Synergetic effect of laser patterning and micro coining for controlled lubricant propagation In: Surface topography, 4 (3), 034008, 2016 [DOI: 10.1088/2051-672X/4/3/034008]	Rosenkranz, Andreas (Corresponding author) Gruetzmacher, Philipp G. Szurdak, Adam Gachot, Carsten Hirt, Gerhard et al.
[Contribution to a book, Journal Article] Investigation on Hardening and Softening Behavior of Steel after Rapid Strain Rate Changes In: Key engineering materials : KEM, 716, 121-128, 2016 [DOI: 10.4028/www.scientific.net/KEM.716.121]	Dierdorf, Jens (Corresponding author) Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Extended Conical Tube-Upsetting Test to Investigate the Evolution of Friction Conditions In: Key engineering materials, 716, 157-164, 2016 [DOI: 10.4028/www.scientific.net/KEM.716.157]	Teller, Marco (Corresponding author) Klubakov, Alexej Franzke, Martin Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Investigation of a composite ring rolling process by FEM and experiment In: NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes : University of Technology of Troyes, France, 4-7 July, 2016 / K. Saanouni (ed.), 15011, 7 Seiten, 2016 [DOI: 10.1051/matecconf/20168015011]	Seitz, Joachim Friedhelm (Corresponding author) Schwich, Gideon Guenther, Stefan Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Influence of die geometry and material selection on the behavior of protective die covers in closed-die forging In: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ..., 130012, 5 Seiten, 2016 [DOI: 10.1063/1.4963531]	Yu, Yingyan (Corresponding author) Rosenstock, Dirk Wolfgarten, Martin Christoph Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] On the impact of rolling direction and tool orientation angle in Rotary Peen Forming In: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ..., 070022, 4 Seiten, 2016 [DOI: 10.1063/1.4963475]	Gottschalk, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Realistic modelling of the tool kinematics of radial-axial ring rolling machines in finite element simulation In: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ..., 130018, 6 Seiten, 2016 [DOI: 10.1063/1.4963537]	Schwich, Gideon (Corresponding author) Jenkouk, Vahid Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Inverse modelling approach in 3-point bending for elasto- plastic material parameter identification of thin spring steel In: Journal of physics / Conference Series, 734, 032011, 2016 [DOI: 10.1088/1742-6596/734/3/032011]	Mertin, Chris Frederic (Corresponding author) Huse, K. Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Precise Prediction of Microstructure Properties with Minimal Experimental Effort for the Nickel-Base Alloy Inconel 718 In: [WGP Congress 2016 / Edited by Jens P. Wulfsberg, Marc Fette, Tobias Montag], 43-50, 2016 [DOI: 10.4028/www.scientific.net/AMR.1140.43]	Krämer, Alexander Maximilian (Corresponding author) Lohmar, Johannes (Corresponding author) Hirt, Gerhard (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Development of a Laser Triangulation Gauge for High Precision Strip Thickness Control In: [ WGP Congress 2016 / Edited by Jens P. Wulfsberg, Marc Fette, Tobias Montag], 107-114, 2016 [DOI: 10.4028/www.scientific.net/AMR.1140.107]	Stockert, Sven (Corresponding author) Wehr, Matthias (Corresponding author) Lohmar, Johannes (Corresponding author) Hirt, Gerhard (Corresponding author) Abel, Dirk (Corresponding author)
[Journal Article] Virtueller Einblick für den Schmied In: RWTH-Themen : Forschungsmagazin, 2016 (1), 18-25, 2016 [DOI: 10.18154/RWTH-2016-06286]	Hirt, Gerhard Krämer, Alexander Maximilian (Corresponding author) Wolfgarten, Martin Christoph
[Journal Article] New method for the manufacturing of curved workpieces by open-die forging In: CIRP annals, manufacturing technology, 65 (1), 285-288, 2016 [DOI: 10.1016/j.cirp.2016.04.125]	Wolfgarten, Martin Christoph (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Ideen Form geben In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 45-58, 2016	Hirt, Gerhard (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Flexible Blechbearbeitung für kleine Stückzahlen In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 355-366, 2016	Conrads, Laura (Corresponding author) Bailly, David Laugwitz, Marvin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Prozessnahe Charakterisierung von innovativen Oberflächen für das Trockenumformen In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 345-354, 2016	Teller, Marco (Corresponding author) Roeder, Roman Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Verbesserte Werkstoffcharakterisierung für die Warmblechumformung durch Hot-Gas-Bulgetests In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 335-344, 2016	Braun, Alexander (Corresponding author) Hirt, Gerhard Waerder, Maximilian
[Contribution to a book, Contribution to a conference proceedings] Simulation des Nachwalzens von Aluminiumband für die Automobilindustrie In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 293-302, 2016	Hojda, Stephan (Corresponding author) Kang, Wenyi Wang, Yuwei Hirt, Gerhard Vogd, Matthias
[Contribution to a book, Contribution to a conference proceedings] Freiformschmieden gekrümmter Bauteile durch überlagerte Manipulatorbewegungen In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 133-142, 2016	Wolfgarten, Martin Christoph (Corresponding author) Rosenstock, Dirk Hirt, Gerhard Schäfer, Hanno Schwarz, Reinhard
[Contribution to a book, Contribution to a conference proceedings] Numercial investigation into aluminium skin pass rolling In: 10th International Rolling Conference and the 7th European Rolling Conference : June 6-9, 2016 Graz, Austria / organised by ASMET - The Austrian Society for Metallurgy and Materials ; chairman: Bruno Buchmayr (Montanuniversitaet Loeben), 1106-1115, 2016	Hojda, Stephan (Corresponding author) Vogd, Matthias Kang, Wenyi Pawelski, Hartmut Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Experimental investigation into aluminium skin pass rolling In: 10th International Rolling Conference and the 7th European Rolling Conference : June 6-9, 2016 Graz, Austria / organised by ASMET - The Austrian Society for Metallurgy and Materials ; chairman: Bruno Buchmayr (Montanuniversitaet Loeben), 1033-1042, 2016	Vogd, Matthias Hojda, Stephan Wengenroth, Walter Pawelski, Hartmut Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Crystal plasticity finite element analysis of texture evolution during cold rolling of a non-oriented electrical steel In: 10th International Rolling Conference and the 7th European Rolling Conference : June 6-9, 2016 Graz, Austria / organised by ASMET - The Austrian Society for Metallurgy and Materials ; chairman: Bruno Buchmayr (Montanuniversitaet Loeben), 494-504, 2016	Wei, Xuefei Hojda, Stephan Dierdorf, Jens Lohmar, Johannes Hirt, Gerhard
[Journal Article] Effect of the Interdependence of Cold Rolling Strategies and Subsequent Punching on Magnetic Properties of NO Steel Sheets In: IEEE transactions on magnetics, 52 (5), 2001504, 2016 [DOI: 10.1109/TMAG.2016.2516340]	Steentjes, Simon (Corresponding author) Leuning, Nora (Corresponding author) Dierdorf, Jens Wei, Xuefei Hirt, Gerhard et al.
[Journal Article] Inkrementelles Umformen wirtschaftlich gemacht In: Maschinenmarkt : MM, 24, 30-31, 2016	Schmitz, Roman Ulrich Christopher (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Numerical Investigation of a Process Control for the Roller Levelling Process Based on a Force Measurement In: Materials science forum, 854, 249-254, 2016	Grüber, Markus (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] A New FE-Model for the Investigation of Bond Formation and Failure in Roll Bonding Processes In: Materials science forum, 854, 152-157, 2016	Pietryga, Michael P. (Corresponding author) Lohmar, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Effects of Process Parameter Variation on the Bonding Strength in Clad Steel Strips by Twin-Roll Strip Casting In: Materials science forum, 854, 124-130, 2016	Münster, Dennis (Corresponding author) Vidoni, Michele Hirt, Gerhard
[Book, Proceedings] Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband, 2016	Hirt, Gerhard (Editor)
[Journal Article] Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns In: Tribology international, 95, 290-297, 2015 [DOI: 10.1016/j.triboint.2015.11.035]	Rosenkranz, Andreas (Corresponding author) Szurdak, Adam Gachot, Carsten Hirt, Gerhard Mücklich, Frank
[Contribution to a book, Contribution to a conference proceedings] Using Data Sampling and Inverse Optimization for the Reduction of the Experimental Effort in the Characterization of Hot Working Behaviour for a Case Hardening Steel In: Material Forming : ESAFORM 2015 / edited by Aldo Ofenheimer, Cecilia Poletti, Daniela Schalk-Kitting and Christof Sommitsch, 1351-1356, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.1351]	Krämer, Alexander Maximilian (Corresponding author) Lohmar, Johannes Bambach, Markus Hirt, Gerhard
[Journal Article] Metal forming beyond shaping: Predicting and setting product properties In: CIRP annals, manufacturing technology, 64 (2), 629-653, 2015 [DOI: 10.1016/j.cirp.2015.05.001]	Tekkaya, A. E. (Corresponding author) Allwood, J. M. Bariani, P. F. Bruschi, S. Cao, J. et al.
[Contribution to a book] Integrated Technologies In: Advances in production technology / ed. by Christian Brecher, 99-100, 2015	Lauwers, Bert Hirt, Gerhard Hopmann, Christian Windeck, Christian
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Numerical and Experimental Investigation of a Modified Twin Roll Strip Casting Process for the Production of Clad Steel Strips In: Key engineering materials, 651/653, 689-694, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.689]	Vidoni, Michele (Corresponding author) Daamen, Markus Hirt, Gerhard
[Contribution to a conference proceedings] Development of a gas based bulge test for the determination of flow curves for hot sheet metal forming processes In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015	Braun, Alexander (Corresponding author) Storz, Johannes Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] The inverse determination of material parameters for hot plate rolling exclusively from rolling mill data In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015	Lohmar, Johannes (Corresponding author) Bambach, Markus Hirt, Gerhard Seuren, Simon
[Contribution to a book] Hybrid Sheet Metal Processing Center In: 60 excellent inventions in metal forming / A. Erman Tekkaya ; Werner Homberg ; Alexander Brosius, eds., 143-148, 2015 [DOI: 10.1007/978-3-662-46312-3]	Bailly, David Conrads, Laura Hirt, Gerhard (Corresponding author)
[Contribution to a conference proceedings] Investigation on the Producibility of Freeform Facade Elements of Sheet Metal as Self-Supporting Structures by Means of Incremental Sheet Forming In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015	Bailly, David (Corresponding author) Bambach, Markus Hirt, Gerhard Pofahl, Thorsten Christian Della Puppa, Giovanni et al.
[Journal Article] Leichtwerkstoffe umformen ohne teure Tools In: Umformtechnik : Zeitschrift für Massivumformer, 7, 34-35, 2015	Conrads, Laura (Corresponding author) Hirt, Gerhard
[Journal Article] Streckziehen kombiniert mit inkrementeller Blechumformung - Von der Geometrie zum fertigen Bauteil In: Industrie-Anzeiger, 28, 50-51, 2015	Conrads, Laura (Corresponding author) Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Multilayered metal panels for doubly curved freeform shell structures In: International Conference on Shells, Plates and Beams, University of Bologna, 9-11 September, 2015, Bologna, Italy / edited by Antonio J. M. Ferreira, Erasmo Viola, Francesco Tornabene, 66-67, 2015	Della Puppa, Giovanni (Corresponding author) Pofahl, Thorsten Christian Trautz, Martin Bailly, David Hirt, Gerhard
[Contribution to a book] Virtual Production Systems In: Advances in production technology / ed. by Christian Brecher, 67-68, 2015 [DOI: 10.1007/978-3-319-12304-2]	Hirt, Gerhard Bambach, Markus Bleck, Wolfgang Prahl, Ulrich Schulz, Wolfgang
[Journal Article] A new method to determine isothermal flow curves for integrated process and microstructural simulation in metal forming In: International journal of material forming, 8 (1), 59-66, 2013 [DOI: 10.1007/s12289-013-1147-6]	Xiong, Wei (Corresponding author) Lohmar, Johannes Bambach, Markus Hirt, Gerhard
[Journal Article] Untersuchung zur Oberflächenmodifikation mittels Laserpolieren für das schmiermittelfreie Kaltfließpressen von Aluminium In: Dry metal forming open access journal, 1, 143-151, 2015	Roß, Ingo (Corresponding author) Temmler, André Poprawe, Reinhart Teller, Marco Hirt, Gerhard et al.
[Journal Article] Continuous Process Chain Modeling of low-loss FeSi Sheet for Energy-efficient Electrical Drives In: Newsletter / International Compumag Society, 22 (3), 3-12, 2015	Leuning, Nora (Corresponding author) Steentjes, Simon Dierdorf, Jens Wei, Xuefei Hirt, Gerhard et al.
[Contribution to a conference proceedings] Effect of the interdependence of cold-rolling strategies and subsequent cutting on the magnetic properties of electrical steel sheets In: [Soft Magnetic Materials Conference, 13.09.2015-16.09.2015, Sao Paolo, Brasil], 2015	Kurpat, Thorsten (Corresponding author) Steentjes, Simon Hameyer, Kay Dierdorf, Jens Wei, Xuefei et al.
[Journal Article] Methodik zur Entwicklung von interaktionsminimierten Oberflächenschichten für das schmiermittelfreie Kaltfließpressen von Aluminium In: Dry metal forming open access journal, 1, 34-41, 2015	Teller, Marco (Corresponding author) Bambach, Markus Hirt, Gerhard Roß, Ingo Temmler, André et al.
[Journal Article] Bandgießen individueller Blechhalbzeuge In: Werkstoffe in der Fertigung, 2015 (06), 23-25, 2015	Münster, Dennis (Corresponding author) Vidoni, Michele Hirt, Gerhard
[Journal Article] Das integrierte Blechbearbeitungszentrum In: VDI-Z integrierte Produktion, 10, 51-53, 2015	Gottschalk, Markus Bailly, David Hirt, Gerhard
[Journal Article] Trockene Tribosysteme prozessnah beschreiben In: Maschinenmarkt : MM, 45, 36-41, 2015	Teller, Marco (Corresponding author) Hirt, Gerhard
[Journal Article] Untersuchung zur Herstellung gekrümmter Bauteile beim Freiformschmieden durch überlagerte Biegespannungen In: Schmiede-Journal, 2015 (9), 42-45, 2015	Wolfgarten, Martin Christoph Rosenstock, Dirk Hirt, Gerhard
[Contribution to a conference proceedings] Forging process layout using design of experiments combined with a response surface model In: [7th JSTP International Seminar on Precision Forging, 7h JSTP ISPF, 09.03.2015-12.03.2015, Nagoya, Japan], 87-90, 2015	Dierdorf, Jens (Corresponding author) Henke, Thomas Bambach, Markus Hirt, Gerhard
[Contribution to a book] Evaluation of Modular Roll-Setup to Roll Grooves into Steel Sheets In: Applied mechanics and materials. - 794, 120-127, 2015	Senge, Stefan (Corresponding author) Hirt, Gerhard
[Contribution to a book] Development and experimental verification of a new roller-coining setup to texture flat and curved surfaces In: Applied mechanics and materials. - 794, 128-135, 2015	Szurdak, Adam (Corresponding author) Hirt, Gerhard
[Journal Article] Robot Controlled Rotary Peen Forming by Laser-Assisted Distance Control In: Key engineering materials : KEM, 651/653, 1084-1089, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.1084]	Gottschalk, Markus Bambach, Markus Hirt, Gerhard
[Journal Article] A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium In: CIRP annals, manufacturing technology, 64/1, 289-292, 2015 [DOI: 10.1016/j.cirp.2015.04.086]	Teller, Marco (Corresponding author) Bambach, Markus Hirt, Gerhard (Corresponding author)
[Journal Article] Implementation of an open-die forging process for large hollow shafts for wind power plants with respect to an optimized microstructure In: Metallurgia italiana, 2015 (4), 43-49, 2015	Wolfgarten, Martin Christoph (Corresponding author) Rosenstock, Dirk Schaeffer, Lirio Hirt, Gerhard
[Journal Article] Production of Clad Steel Strips by Twin-Roll Strip Casting In: Advanced engineering materials, 17 (11), 1588-1597, 2015 [DOI: 10.1002/adem.201500094]	Vidoni, Michele (Corresponding author) Ackermann, Rebecca Richter, Silvia Hirt, Gerhard
[Journal Article] Investigation of the suitability of surface treatments for dry cold extrusion by process-oriented tribological testing In: Key engineering materials, 651/653, 473-479, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.473]	Teller, Marco (Corresponding author) Bambach, Markus Hirt, Gerhard Roß, Ingo Temmler, André et al.
[Journal Article] Determination of thermal boundary conditions for modeling the hot roll bonding process In: Key engineering materials, 651-653, 1357-1362, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.1357]	Melzner, Alina (Corresponding author) Hirt, Gerhard
[Journal Article] The Effect of the Initial Stress and Strain State in Sheet Metals on the Roller Levelling Process In: Key engineering materials, 651/653, 1023-1028, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.1023]	Grüber, Markus (Corresponding author) Oligschläger, Marius Hirt, Gerhard
[Journal Article] First Experimental and Numerical Study on the Use of Sheet Metal Die Covers for Wear Protection in Closed-die Forging In: Key engineering materials, 651/653, 266-271, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.266]	Rosenstock, Dirk (Corresponding author) Segebade, Eric Thore Hirt, Gerhard
[Journal Article] Improving Geometrical Accuracy for Flanging by Incremental Sheet Metal Forming In: International journal of material forming, 8 (3), 391-399, 2014 [DOI: 10.1007/s12289-014-1182-y]	Voswinckel, Holger (Corresponding author) Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Designing new forging steels by ICMPE In: Advances in Production Technology / edited by Christian Brecher, 85-98, 2015 [DOI: 10.1007/978-3-319-12304-2_7]	Bleck, Wolfgang (Corresponding author) Prahl, Ulrich Hirt, Gerhard (Corresponding author) Bambach, Markus
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Experimental and Numerical Investigation on Controlling the Material Flow in Open-die Forging through Superimposed Manipulator Displacement In: Key engineering materials, 651/653, 272-277, 2015 [DOI: 10.4028/www.scientific.net/KEM.651-653.272]	Wolfgarten, Martin Christoph (Corresponding author) Rosenstock, Dirk Freitag, Jan Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Flexible Manufacturing of Double-Curved Sheet Metal Panels for the Realization of Self-Supporting Freeform Structures In: Key engineering materials, 639, 41-48, 2015 [DOI: 10.4028/www.scientific.net/KEM.639.41]	Bailly, David (Corresponding author) Bambach, Markus Hirt, Gerhard Pofahl, Thorsten Christian Della Puppa, Giovanni et al.
[Journal Article] Finite Element Analysis of Manufacturing Micro Lubrication Pockets in High Strength Steels by Hot Micro-Coining In: Steel research international, 86 (3), 257-265, 2015 [DOI: 10.1002/srin.201300475]	Szurdak, Adam (Corresponding author) Hirt, Gerhard
[Journal Article] Twin-roll strip casting : a competitive alternative for the production of high-manganese steels with advanced mechanical properties In: Materials science and engineering / A, 627, 72-81, 2015 [DOI: 10.1016/j.msea.2014.12.069]	Daamen, Markus Haase, Christian (Corresponding author) Dierdorf, Jens Molodov, Dmitri A. Hirt, Gerhard
[Journal Article] Materials modelling in industrial bulk metal forming processes and process chains In: Computer Methods in Materials Science, 15 (1), 5-12, 2015	Hirt, Gerhard (Corresponding author) Bambach, Markus Lohmar, Johannes Güvenc, Onur Henke, Thomas et al.
[Contribution to a book] The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts In: Advances in Production Technology / edited by Christian Brecher, 117-129, 2015 [DOI: 10.1007/978-3-319-12304-2_9]	Hirt, Gerhard (Corresponding author) Bambach, Markus (Corresponding author) Bleck, Wolfgang (Corresponding author) Prahl, Ulrich Stollenwerk, Jochen Hugo (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Recent Investigations on Shot Peen Forming of GLARE Sheets and Rotary Peen Forming In: ICSP12 : proceedings of the 12th International Conference on Shot Peening : Goslar, Germany, September 15-18, 2014 / editor Lothar Wagner, Chairman of ICSP-12, Institute of Materials Science and Engineering, Clausthal University of Technology, Germany, 427-432, 2014	Russig, Christoph Gottschalk, Markus Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings] Fast and Accurate Force Prediction for High Quality Heavy Plates by A State Of The Art Rolling Model Calibrated From Mill Data via Inverse Techniques In: 1st European Steel Technology & Application Days and 31st Journ'ees Sid'erurgiques Internationales, 2014	Lohmar, Johannes Bambach, Markus Hirt, Gerhard Kiefer, Thomas Kotliba, Daniel et al.
[Book, Report] Untersuchungen zur Herstellbarkeit von frei geformten Hüll- und Fassadenelementen als selbsttragende Struktur ohne Unterkonstruktion aus nichtrostendem Stahl mittels inkrementeller Blechumformung (IBU) In: Forschung für die Praxis 846, 2014	Hirt, Gerhard Heise, Franz-Josef Bambach, Markus Bailly, David Trautz, Martin et al.
[Contribution to a conference proceedings] A new concept for freeform shell structures composed of doublycurvedmultilayered panels In: [Proceedings of the IASS-SLTE 2014 Symposium : the IASS-SLTE 2014 Symposium encompassing the annual IASS Symposium and the 6th Latin American Symposium on Tension Structures, 15 to 19 September 2014], 2014	Pofahl, Thorsten Christian Della Puppa, Giovanni Trautz, Martin Bailly, David Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation In: Conference Papers in Science, 2015, 496515, 2014 [DOI: 10.1155/2015/496515]	Teller, Marco (Corresponding author) Seuren, Simon Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Strip casting and ingot casting : comparison of different cooling conditions regarding the as-cast quality In: Proceedings : 8th eccc ; European Continuous Casting Conference ; 23-26 June 2014, Graz, Austria, 1271-1281, 2014	Daamen, Markus von Schweinichen, Petrico Richter, Silvia Hirt, Gerhard Senk, Dieter
[Journal Article] The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques In: Steel research international, 85 (11), 1525-1532, 2014 [DOI: 10.1002/srin.201300431]	Lohmar, Johannes (Corresponding author) Bambach, Markus Hirt, Gerhard Kiefer, Thomas Kotliba, Daniel
[Journal Article] Shot peen forming of fiber metal laminates on the example of GLARE® In: International journal of material forming, 7 (4), 425-438, 2014 [DOI: 10.1007/s12289-013-1137-8]	Russig, Christoph (Corresponding author) Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming In: Procedia engineering, 81, 2305-2310, 2014 [DOI: 10.1016/j.proeng.2014.10.325]	Bambach, Markus (Corresponding author) Voswinckel, Holger Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Selected Processes and Modeling Techniques for Rolled Products In: Procedia engineering, 81, 18-27, 2014 [DOI: 10.1016/j.proeng.2014.09.124]	Hirt, Gerhard Senge, Stefan (Corresponding author)
[Contribution to a conference proceedings, Journal Article] Deformation Behavior of High-manganese TWIP Steels Produced by Twin-roll Strip Casting In: Procedia engineering, 81, 1535-1540, 2014 [DOI: 10.1016/j.proeng.2014.10.186]	Daamen, Markus (Corresponding author) Nessen, Wiebke Pinard, Philippe T. Richter, Silvia Schwedt, Alexander et al.
[Contribution to a conference proceedings, Journal Article] Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel In: Procedia engineering, 81, 268-273, 2014 [DOI: 10.1016/j.proeng.2014.09.162]	Lohmar, Johannes (Corresponding author) Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] On the Effect of Material Processing : Microstructural and Magnetic Properties of Electrical Steel Sheets In: 2014 4th International Electric Drives Production Conference (EDPC 2014) : Nuremberg, Germany, 30 September - 1 October 2014 ; [including related conferences: E-Motive Forum of the German Machine Builders Association (VDMA), the Energy Transfer for Electric Vehicles Conference (E\|TEV) ...] / IEEE, 464-470, 2014 [DOI: 10.1109/EDPC.2014.6984436]	Steentjes, Simon Franck, David Andre Hameyer, Kay Vogt, S. Bednarz, M. et al.
[Contribution to a conference proceedings] Near Net Shape Production of Baseflages by Radial-Axial Ring Rolling In: 19th International Forgemasters Meeting : 29.09-03.10.2014, Tokyo Bay Area, Japan / Herausgeber: JSCFA - Steel Castings and Forgings Association of Japan, 233-239, 2014	Seitz, Joachim Friedhelm Schwich, Gideon Jenkouk, Vahid Hirt, Gerhard
[Contribution to a conference proceedings] Online Analysis of Cogging Processes : Evaluation of the Equivalent Strain, Temperature and Grain Size Distribution In: 19th International Forgemasters Meeting : 29.09-03.10.2014, Tokyo Bay Area, Japan / Herausgeber: JSCFA - Steel Castings and Forgings Association of Japan, 507-512, 2014	Rosenstock, Dirk Recker, Dominik Hirt, Gerhard
[Journal Article] Hot rolling of AISI 304 tailored strips procuced by twin roll strip casting In: Production engineering, 8 (5), 619-626, 2014 [DOI: 10.1007/s11740-014-0567-6]	Vidoni, Michele (Corresponding author) Daamen, Markus Gastreich, Jan Offermanns, Nico Hirt, Gerhard
[Journal Article] Online Visualization during Open Die Forging and Optimization of Pass Schedules In: Steel research international, 85 (9), 1348-1354, 2014 [DOI: 10.1002/srin.201300396]	Rosenstock, Dirk (Corresponding author) Recker, Dominik Franzke, Martin Hirt, Gerhard Sommler, Dieter et al.
[Contribution to a book, Contribution to a conference proceedings] Process and materials modelling in incremental bulk metal forming In: 7th Forming Technology Forum 'Warm and Hot Forming' 15.-16.09.2014, Enschede, Niederlande / Herausgeber: Faculty of Engineering Technology, University of Twente, Enschede, the Netherlands. Ton van den Boogaard, 13-20, 2014	Hirt, Gerhard Lohmar, Johannes Rosenstock, Dirk Seitz, Joachim Friedhelm
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Prediction of microstructure and resulting rolling forces by application of a material model in a hot ring rolling process In: Key engineering materials, 622/623, 970-977, 2014 [DOI: 10.4028/www.scientific.net/KEM.622-623.956]	Schwich, Gideon (Corresponding author) Henke, Thomas Seitz, Joachim Friedhelm Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Analysis into differences between the buckling in single-point and two-point incremental sheet forming of components for self-supporting sheet metal structures In: Key engineering materials, 622/623, 367-374, 2014 [DOI: 10.4028/www.scientific.net/KEM.622-623.367]	Bailly, David (Corresponding author) Bambach, Markus Hirt, Gerhard Pofahl, Thorsten Christian Herkrath, Ralf et al.
[Contribution to a conference proceedings, Journal Article] Manufacturing of Innovative Self-Supporting Sheet-Metal Structures Representing Freeform Surfaces In: Procedia CIRP, 18, 51-56, 2014 [DOI: 10.1016/j.procir.2014.06.106]	Bailly, David (Corresponding author) Bambach, Markus Hirt, Gerhard Pofahl, Thorsten Christian Herkrath, Ralf et al.
[Contribution to a book, Contribution to a conference proceedings] Development of a pneumatic bulge test for high temperatures and controlled strain rates In: WGP Congress 2014 : progress in production engineering ; selected, peer reviewed papers from the 2014 WGP Congress, September 9 - 10, 2014, Erlangen, Germany ; [FAU Friedrich-Alexander-Universität Erlangen-Nürnberg, Technische Fakultät] / ed. by Marion Merklein ..., 245-252, 2014 [DOI: 10.4028/www.scientific.net/AMR.1018.245]	Braun, Alexander (Corresponding author) Storz, Johannes Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Adjusting of Roller Levellers by Finite Element Simulations Including a Closed-loop Control In: WGP Congress 2014 : progress in production engineering ; selected, peer reviewed papers from the 2014 WGP Congress, September 9 - 10, 2014, Erlangen, Germany ; [FAU Friedrich-Alexander-Universität Erlangen-Nürnberg, Technische Fakultät] / ed. by Marion Merklein ..., 207-214, 2014 [DOI: 10.4028/www.scientific.net/AMR.1018.207]	Grüber, Markus (Corresponding author) Oligschläger, Marius Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] A cohesive zone model for simulation of the bonding and debonding in metallic composite structures - experimental validations In: Key engineering materials, 622/623, 443-452, 2014 [DOI: 10.4028/www.scientific.net/KEM.622-623.443]	Kebriaei, Reza (Corresponding author) Mikloweit, Alexander Vladimirov, Ivaylo N. Bambach, Markus Reese, Stefanie et al.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Investigation of a bulge test at high temperatures and high strain rates using a finite-element simulation study In: Key engineering materials, 622/623, 300-307, 2014 [DOI: 10.4028/www.scientific.net/KEM.622-623.300]	Braun, Alexander (Corresponding author) Bambach, Markus Hirt, Gerhard
[Journal Article] A finite element framework for the evolution of bond strength in joining-by-forming processes In: Journal of materials processing technology, 214 (10), 2156-2168, 2014 [DOI: 10.1016/j.jmatprotec.2014.03.015]	Bambach, M. Pietryga, M. Mikloweit, A. (Corresponding author) Hirt, Gerhard
[Journal Article] Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts In: CIRP annals : manufacturing technology, 63 (1), 265-268, 2014 [DOI: 10.1016/j.cirp.2014.03.025]	Daamen, Markus (Corresponding author) Güvenc, Onur Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Auswirkungen und Einschränkungen der Technologieintegration in Werkzeugmaschinen In: Innovations of sustainable production for green mobility : energy-efficient technologies in production; 3rd International Chemnitz Manufacturing Colloquium, ICMC 2014; 3rd International Colloquium of the Cluster of Excellence eniPROD; proceedings / eds.: Reimund Neugebauer; Welf-Guntram Drossel. - Pt. 1, 413-432, 2014	Brecher, Christian Hirt, Gerhard Bäumler, Stephan Lohse, Wolfram Bambach, Markus et al.
[Contribution to a book, Journal Article] Coupling of Crystal Plasticity Finite Element and Phase Fields Methods for the Prediction of SRX Kinetics after Hot Working In: Steel research international, 85 (6), 999-1009, 2014 [DOI: 10.1002/srin.201300191]	Güvenc, Onur (Corresponding author) Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Crash behavior of high-manganes TWIP steel produced by strip casting and by an adapted hot forming route In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 597-604, 2014	Daamen, Markus Güvenc, Onur Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Development of a testing procedure to determine the bond strength in joining-by-forming processes In: Tribology in Manufacturing Processes & Joining by Plastic Deformatio ; Selected, peer reviewed papers from the 6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, June 22-24, 2014, Darmstadt, Germany / Ed.: Peter Groche, 481-488, 2014 [DOI: 10.4028/www.scientific.net/AMR.966-967.481]	Mikloweit, Alexander (Corresponding author) Bambach, Markus Pietryga, Michael P. Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Roll bonding of two materials using temperature to compensate the material strength difference In: Tribology in Manufacturing Processes & Joining by Plastic Deformatio ; Selected, peer reviewed papers from the 6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, June 22-24, 2014, Darmstadt, Germany / Ed.: Peter Groche, 471-480, 2014 [DOI: 10.4028/www.scientific.net/AMR.966-967.471]	Melzner, Alina (Corresponding author) Hirt, Gerhard
[Journal Article] Very high cycle fatigue behaviour of riblet structured AlClad 2024 thin sheets In: International journal of fatigue, 63, 183-190, 2014 [DOI: 10.1016/j.ijfatigue.2014.01.023]	Stille, Sebastian (Corresponding author) Pöplau, Julia Beck, Tilmann Bambach, Markus Hirt, Gerhard et al.
[Contribution to a conference proceedings, Journal Article] Influence of the process temperature on the properties of friction stir welded blanks made of mild steel and aluminium In: Key engineering materials, 611/612, 1429-1436, 2014 [DOI: 10.4028/www.scientific.net/KEM.611-612.1429]	Mertin, Chris Frederic (Corresponding author) Naumov, Andreas Mosecker, Linda Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Design and application of an advanced fast rolling model with through thickness resolution for heavy plate rolling In: Ingot casting, rolling & forging : ICRF, ingot casting, rolling and forging 2014 ; 2nd International Conference ; Milan, Italy, 7 - 9 May 2014 / organised by AIM, Associazione Italiana di Metallurgia, 2014	Lohmar, Johannes Seuren, Simon Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Application of finite element analysis considering the complex tool kinematics of axial-profiling and dishing in ring rolling In: Ingot casting, rolling & forging : ICRF, ingot casting, rolling and forging 2014 ; 2nd International Conference ; Milan, Italy, 7 - 9 May 2014 / organised by AIM, Associazione Italiana di Metallurgia, 2014	Schwich, Gideon Seitz, Joachim Friedhelm Jenkouk, Vahid Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Analysis of pore closure in open die forging by experimental and numerical simulation In: Ingot casting, rolling & forging : ICRF, ingot casting, rolling and forging 2014 ; 2nd International Conference ; Milan, Italy, 7 - 9 May 2014 / organised by AIM, Associazione Italiana di Metallurgia, 2014	Rosenstock, Dirk Melzner, Alina Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Tailored strips welding, strip profile rolling and twin roll casting In: WGP Congress 2012 : Progress in Production Engineering ; Selected, peer reviewed papers from the 2012 WGP Congress, June 27-28, 2012, Berlin, Germany / ed by: WGP, 29-39, 2014 [DOI: 10.4028/www.scientific.net/AMR.907.29]	Daamen, Markus (Corresponding author) Davalos Julca, Daniel (Corresponding author) Hirt, Gerhard (Corresponding author)
[Contribution to a conference proceedings, Journal Article] Profile Strip Casting with Inline Hot Rolling : Numerical Simulations for the Process Chain Design In: Key engineering materials, 611/612, 1568-1575, 2014 [DOI: 10.4028/www.scientific.net/KEM.611-612.1568]	Vidoni, Michele (Corresponding author) Mendel, Arne Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Intended Dishing in Ring Rolling In: Key engineering materials, 611/612, 194-201, 2014 [DOI: 10.4028/www.scientific.net/KEM.611-612.194]	Seitz, Joachim Friedhelm (Corresponding author) Schwich, Gideon Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Manufacturing and tribological investigation of hot micro-coined lubrication pockets In: Key engineering materials, 611/612, 417-424, 2014 [DOI: 10.4028/www.scientific.net/KEM.611-612.417]	Szurdak, Adam (Corresponding author) Rosenkranz, Andreas Gachot, Carsten Hirt, Gerhard Mücklich, Frank
[Contribution to a conference proceedings, Journal Article] The influence of process parameters on the forming of riblets during riblet rolling In: Key engineering materials, 611/612, 715-722, 2014 [DOI: 10.4028/www.scientific.net/KEM.611-612.715]	Pöplau, Julia (Corresponding author) Stille, Sebastian Romans, Thijs Beck, Tilmann Singheiser, Lorenz et al.
[Contribution to a book, Contribution to a conference proceedings] Optimization of a closed die forging process to manufacture a gear wheel by the use of a response surface model In: THERMEC 2013 supplement : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials : processing, fabrication, properties, applications, December 2-6, 2013, Las Vegas, USA / Editors: B. Mishra, M. Ionescu and T. Chandra, 254-259, 2014 [DOI: 10.4028/www.scientific.net/AMR.922.254]	Henke, Thomas (Corresponding author) Bambach, Markus Hirt, Gerhard
[Journal Article] Finite Element implementation of a bonding model and application to roll bonding of aluminium sheets of largely different yield strength In: Materials science forum, 783-786, 644-650, 2014	Bambach, Markus Pietryga, Michael P. Mikloweit, Alexander Hirt, Gerhard Karhausen, Kai Friedrich
[Contribution to a book, Contribution to a conference proceedings] Aktuelle Entwicklungen zur Auslegung und Optimierung von Ringwalzprozessen In: "Industrie und Wissenschaft - Gemeinsam die Zukunft gestalten" : 21. Umformtechnisches Kolloquium ; UKH 2014 ; Hannover, 26.-27. Februar 2014 / HFF, Hannoversches Forschungsinstitut für Fertigungsfragen; IFUM, Institut für Umformtechnik und Umformmaschinen, Universität Hannover. Hrsg.: Bernd-Arno Behrens, 227-244, 2014	Hirt, Gerhard Seitz, Joachim Friedhelm Schwich, Gideon
[Journal Article] Accounting for shear deformation in fast models for plate rolling In: Production engineering, 8 (1/2), 17-24, 2014 [DOI: 10.1007/s11740-013-0500-4]	Seuren, Simon (Corresponding author) Seitz, Joachim Friedhelm Krämer, Alexander Maximilian Bambach, Markus Hirt, Gerhard
[Journal Article] Effiziente Strategien zur Prozessauslegung und -optimierung beim Ringwalzen In: Stahl und Eisen, 134 (2), 77-86, 2014	Schwich, Gideon Seitz, Joachim Friedhelm Hirt, Gerhard Jenkouk, Vahid
[Contribution to a book, Contribution to a conference proceedings] Inverse Modeling Techniques for the Precise Prediction of Rolling Forces and Torques in Heavy Plate Rolling In: Rolling 2013 : 9th International Rolling Conference & 6th European Rolling Conference ; Venice (Italy), June 10 - 12, 2013 ; proceedings / organized by AIM, Associazione Italiana di Metallurgia, 1-8, 2013	Lohmar, Johannes Bambach, Markus Hirt, Gerhard Kiefer, Thomas Kotliba, Daniel
[Contribution to a book, Contribution to a conference proceedings] Design and manufacturing of self-supporting folded structures using incrementalsheet forming In: Rethinking Prototyping : Proceedings of the Design Modelling Symposium Berlin 2013 / Christoph Gengnagel (Hrsg.), 491-502, 2013	Trautz, Martin Heyden, Johann-Wilhelm Herkrath, Ralf Pofahl, Thorsten Christian Bailly, David et al.
[Contribution to a conference proceedings] Survey on the Forming Limits in the Process Combination of Stretch-Forming and Incremental Sheet Metal Forming In: [SheMet2013, SheMet 2013, 25.03.2013-27.03.2013, Belfast, Nordirland], 2013	Göttmann, A. (Corresponding author) Böhnke, S. Voswinckel, H. Bambach, Markus Hirt, Gerhard
[Journal Article] A novel approach for temperature control in ISF supported by laser and resistance heating In: The international journal of advanced manufacturing technology, 67 (9), 2195-2205, 2012 [DOI: 10.1007/s00170-012-4640-z]	Göttmann, A. (Corresponding author) Bailly, David Bergweiler, Georg Bambach, M. Stollenwerk, Jochen et al.
[Contribution to a book, Contribution to a conference proceedings] Einfluss experimenteller Unsicherheiten auf die Beschreibung des thermo-mechanischen Werkstoffverhaltens und der Randbedingungen für die Auslegung von Gesenkschmiedeprozessen In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : [Tagung "Werkstoffprüfung" vom 28. bis 29. November 2013 in Neu-Ulm] / hrsg. von Hans-Jürgen Christ ; Veranstalter: Deutsche Gesellschaft für Materialkunde ..., 211-216, 2013	Henke, Thomas (Corresponding author) Hirt, Gerhard Bambach, Markus
[Contribution to a book] Methoden für eine robuste, werkstoffgerechte Auslegung von Gesenkschmiedeprozessen In: [16. Workshop Simulation in der Umformtechnik : Prozessführung und Bauteileigenschaften in der Umformtechnik ; 12. April 2013, Dortmund / Institut für Umformtechnik und Leichtbau, Universität Dortmund], 118-135, 2013	Henke, T. (Corresponding author) Bambach, M. Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Analyse von Sensitivitäten bei der Modellierung des Grobblechwalzens In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 111-122, 2013	Seuren, S. Bambach, M. (Corresponding author) Hirt, Gerhard Willkomm, C. Bischof, C. et al.
[Contribution to a book, Contribution to a conference proceedings] Design and manufacturing of self-supporting folded structures using incremental sheet forming In: Rethinking prototyping : proceedings of the Design Modelling Symposium Berlin 2013 ; [28/09 - 02/10/2013] / [C. Gengnagel; A. Kilian; J. Nembrini; F. Scheurer (eds.)], 491-502, 2013	Trautz, Martin Heyden, Johann-Wilhelm Herkrath, Rolf Pofahl, Thorsten Christian Bailly, David et al.
[Journal Article] Pass schedule optimization and online visualization in open-die forging In: Stahl und Eisen, 133 (8), 47-50,52-54, 2013	Rosenstock, Dirk Recker, Dominik Franzke, Martin Hirt, Gerhard Sommler, Dieter et al.
[Contribution to a conference proceedings] Influence of material processing steps annealing and cutting on magnetic materials properties relevant for electrical machine design In: Modelling of process chains and interfaces for sheet metal forming : 6th Forming Technology Forum ; September 19th - 20th, 2013, Herrsching, Germany, 6 S., 2013	Steentjes, Simon Hameyer, Kay Vogt, S. Bednarz, M. Volk, W. et al.
[Contribution to a conference proceedings] Incremental Forging of Hollow Shafts In: 33rd Senafor, 09.-11. Oktober 2013, Porto Alegre, Brasilien / Hrsg.: Lirio Schaeffer, Alexandre da Silva Rocha, 2013	Rosenstock, Dirk Recker, Dominik Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Microstructure Analysis of High-manganese TWIP Steels Produced via Strip Casting In: Key engineering materials, 554/557,1, 553-561, 2013 [DOI: 10.4028/www.scientific.net/KEM.554-557.553]	Daamen, Markus (Halle Bailey) Richter, Silvia (Corresponding author) Hirt, Gerhard (Author)
[Journal Article] Randwerteermittlung für die robuste Auslegung von Schmiedeprozessen In: wt Werkstattstechnik online, 103 (10), 783-788, 2013	Henke, Thomas Hirt, Gerhard Bambach, Markus
[Journal Article] Manufacturing dish shaped rings on radial-axial ring rolling mills In: Production engineering, 7 (6), 611-618, 2013 [DOI: 10.1007/s11740-013-0486-y]	Seitz, Joachim Friedhelm (Author) Jenkouk, Vahid Hirt, Gerhard
[Journal Article] Stichplanoptimierung und Onlinevisualisierung beim Freiformschmieden In: Stahl und Eisen, 133 (8), 47-54, 2013	Rosenstock, Dirk Recker, Dominik Franzke, Martin Hirt, Gerhard Sommler, Dieter et al.
[Journal Article] Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging In: CIRP annals : manufacturing technology, 62 (1), 287-290, 2013 [DOI: 10.1016/j.cirp.2013.03.121]	Henke, Thomas Bambach, Markus Hirt, Gerhard
[Journal Article] Advanced Design of Hierarchical Topographies in Metallic Surfaces by Combining Micro-Coining and Laser Interference Patterning In: Advanced engineering materials, 15 (6), 503-509, 2013 [DOI: 10.1002/adem.201200295]	Gachot, Carsten (Corresponding author) Rosenkranz, Andreas Wietbrock, Burkhard Hirt, Gerhard Mücklich, Frank
[Contribution to a book, Journal Article] Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process In: Materials science forum, 762, 354-359, 2013 [DOI: 10.4028/www.scientific.net/MSF.762.354]	Henke, Thomas (Corresponding author) Hirt, Gerhard (Author) Bambach, Markus (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Riblet-rolling of clad AlCu4Mg1 sheets : passive drag reduction in aeronautics In: Rolling 2013 : 9th International Rolling Conference & 6th European Rolling Conference ; Venice (Italy), June 10 - 12, 2013 ; proceedings / organized by AIM, Associazione Italiana di Metallurgia, 2013	Pöplau, Julia Romans, Thijs Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Cold rolling of high manganese twip steel produced by strip casting and by an adpted hot forming route In: Rolling 2013 : 9th International Rolling Conference & 6th European Rolling Conference ; Venice (Italy), June 10 - 12, 2013 ; proceedings / organized by AIM, Associazione Italiana di Metallurgia, 2013	Daamen, Markus Güvenc, Onur Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Recent developments in modeling of hot rolling processes: Part I - Fundamentals In: The 11th International Conference on Numerical Methods in Industrial Forming Processes : NUMIFORM 2013 : Shenyang, China, 6-10 July 2013 / [Herausgeber: Shi-Hong Zhang, Xiang-Hua Liu, Ming Cheng, Juan Li, 06.-10.07.2013, Shenyang, China], 222-230, 2013 [DOI: 10.1063/1.4806828]	Hirt, Gerhard Bambach, Markus Seuren, Simon Henke, Thomas Lohmar, Johannes
[Contribution to a book, Contribution to a conference proceedings] Recent developments in modeling of hot rolling processes: Part II - Applications In: The 11th International Conference on Numerical Methods in Industrial Forming Processes : NUMIFORM 2013 : Shenyang, China, 6-10 July 2013 / [Herausgeber: Shi-Hong Zhang, Xiang-Hua Liu, Ming Cheng, Juan Li, 06.-10.07.2013, Shenyang, China], 231-238, 2013 [DOI: 10.1063/1.4806829]	Hirt, Gerhard Bambach, Markus Seuren, Simon Henke, Thomas Lohmar, Johannes
[Contribution to a book, Contribution to a conference proceedings] Numerical Simulations Supporting the Process Design of Ring Rolling Processes In: The 11th International Conference on Numerical Methods in Industrial Forming Processes : NUMIFORM 2013 : Shenyang, China, 6-10 July 2013 / [Herausgeber: Shi-Hong Zhang, Xiang-Hua Liu, Ming Cheng, Juan Li, 06.-10.07.2013, Shenyang, China], 695-700, 2013 [DOI: 10.1063/1.4806897]	Jenkouk, Vahid Hirt, Gerhard Seitz, Joachim Friedhelm
[Contribution to a book, Contribution to a conference proceedings] Lightweight construction by open die forging of hollow generator shafts for wind power plants In: New developments in forging technology : [papers of the International Conference on 'New Developments in Forging Technology' in Fellbach (near Stuttgart) - Germany, on June, 4th and 5th, 2013] / IFU, Institute for Metal Forming Technology of the University Stuttgart ... Ed. by Mathias Liewald. [In cooperation with: Forschungsgesellschaft Umformtechnik mbh (FGU, Stuttgart/Germany) ...], 349-358, 2013	Recker, Dominik Rosenstock, Dirk Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Die and process design for hot forging of a gear wheel - a case study In: Key engineering materials, 554-557, 307-316, 2013 [DOI: 10.4028/www.scientific.net/KEM.554-557.307]	Henke, Thomas (Corresponding author) Bambach, Markus (Corresponding author) Hirt, Gerhard (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Application of a Fast Calculation Model for the Process Monitoring of Open Die Forging Processes In: Key engineering materials, 554-557, 248-263, 2013 [DOI: 10.4028/www.scientific.net/KEM.554-557.248]	Rosenstock, Dirk (Corresponding author) Recker, Dominik (Corresponding author) Hirt, Gerhard (Corresponding author) Steingießer, Klaus-J. (Corresponding author) Rech, Ralf (Corresponding author) et al.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Advances in the Twin-roll Strip Casting of Strip with Profiled Cross Section In: Key engineering materials, 554/557, 562-571, 2013 [DOI: 10.4028/www.scientific.net/KEM.554-557.562]	Vidoni, Michele (Corresponding author) Daamen, Markus (Author) Hirt, Gerhard (Author)
[Contribution to a book, Contribution to a conference proceedings] Berücksichtigung von Unsicherheiten beim Einsatz mikrostrukturbasierter Werkstoffmodelle In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 85-98, 2013	Henke, Thomas Bambach, Markus Hirt, Gerhard
[Journal Article] Modeling of Static Recrystallization Kinetics by Coupling Crystal Plasticity FEM and Multiphase Field Calculations In: Computer methods in materials science = Informatyka w technologii materialów, 13, 368-374, 2013	Güvenc, Onur Henke, Thomas Laschet, Gottfried Böttger, Bernd Apel, Markus et al.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating In: Key engineering materials, 549, 372-380, 2013 [DOI: 10.4028/www.scientific.net/KEM.549.372]	Mosecker, Linda (Corresponding author) Göttmann, Alexander (Corresponding author) Saeed-Akbari, Alireza Bleck, Wolfgang Bambach, Markus et al.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Process Limits Of Stretch And Shring Flanging by Incremental Sheet Metal Forming In: Key engineering materials, 549, 45-52, 2013 [DOI: 10.4028/www.scientific.net/KEM.549.45]	Voswinckel, Holger (Corresponding author) Bambach, Markus (Corresponding author) Hirt, Gerhard (Corresponding author)
[Proceedings] Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 2013	Hirt, Gerhard (Editor)
[Contribution to a book, Contribution to a conference proceedings] Bandgießen und Weiterverarbeitung profilierter Bänder und hochmanganhaltiger Stähle In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 207-216, 2013	Daamen, Markus Vidoni, Michele Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Forschung und Lehre im Wandel In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 123-134, 2013	Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Selbsttragende Leichtbaufassaden aus Edelstahl durch inkrementelle Blechumformung In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 175-186, 2013	Bailly, David Hirt, Gerhard Herkrath, Ralf Trautz, Martin
[Contribution to a book, Contribution to a conference proceedings] Analyse von Sensivitäten bei der Modellierung des Grobblechwalzens In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 111-122, 2013	Seuren, Simon Bambach, Markus Hirt, Gerhard Willkomm, Johannes Bischof, Christian et al.
[Contribution to a book, Contribution to a conference proceedings] Ringwalzen nicht-rechteckiger Querschnitte In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 55-64, 2013	Jenkouk, Vahid Seitz, Joachim Friedhelm Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Stichplanoptimierung und Online-Visualisierung beim Freiformschmieden In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 39-50, 2013	Rosenstock, Dirk Recker, Dominik Franzke, Martin Hirt, Gerhard Sommler, Dieter et al.
[Contribution to a book, Contribution to a conference proceedings] Fast process models for the online optimisation of open die forging processes In: MEFORM 2013 : Simulation von Umformprozessen, 20.-22. März 2013, Altenberg / Hrsg.: Prof. Dr.-Ing. R. Kawalla, 344-356, 2013	Rosenstock, Dirk Recker, Dominik Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Optimization of superplastic forming processes for high volume production in aeronautics In: Key engineering materials, 549, 189-196, 2013 [DOI: 10.4028/www.scientific.net/KEM.549.189]	Nick, Andreas (Corresponding author) Zettler, Joachim (Corresponding author) Hirt, Gerhard (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Experimental investigations of different tool concepts for Rotary Peen Forming In: Key engineering materials, 549, 53-60, 2013 [DOI: 10.4028/www.scientific.net/KEM.549.53]	Russig, Christoph (Corresponding author) Bambach, Markus (Corresponding author) Hirt, Gerhard (Corresponding author)
[Journal Article] Endabmessungsnahe Herstellung hochmanganhaltiger Stähle In: Konstruktion : Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 65 (1/2), IW12-IW13, 2013	Daamen, Markus Hirt, Gerhard
[Contribution to a book] Interaction effects between strip and work roll during flat rolling process In: Process machine interactions : predicition and manipulation of interactions between manufacturing processes and machine tool structures / Berend Denkena ... (eds.), 439-458, 2013 [DOI: 10.1007/978-3-642-32448-2_20]	Puchhala, S. Franzke, Martin Hirt, Gerhard
[Contribution to a book] Shortening Process Chains for Manufacturing Components with Functional Surfaces via Micro- and Nanostructures In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, 628-684, 2012	Hirt, Gerhard (Corresponding author)
[Abstract, Contribution to a conference proceedings] Einfluss von Unsicherheiten auf die Parameteridentifikation und Vorhersagegenauigkeit mikrostrukturbasierter Werkstoffmodelle In: 15. Workshop Simulation in der Umformtechnik : Optimierung von Prozessen in der Blech- und Massivumformung; Stuttgart, 23 - 24. Februar 2012 / Institut für Umformtechnik, Universität Stuttgart, IFU ... [Veranst. M. Liewald ...]. - 1-2, 2012	Bambach, Markus (Corresponding author) Henke, T. Hirt, Gerhard
[Abstract] Bootstrap Analysis of Experimental Uncertainties Affecting the Accuracy of a Flow Stress Model for Metal Forming In: 2012 TMS Annual Meeting & Exhibition Orlando, FL 2012-03-14 - 2012-03-14, 2012	Henke, Thomas (Corresponding author) Bambach, Markus Hirt, Gerhard
[Contribution to a book] Recken In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd. 2. Handbuch Umformen / [die Hrsg.:] Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 215-223, 2012	Ambaum, Egon Hirt, Gerhard Recker, Dominik Stenzhorn, Franz
[Contribution to a book] Stauchen In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd. 2: Handbuch Umformen / [die Hrsg.:] Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 210-214, 2012	Ambaum, Egon Hirt, Gerhard Recker, Dominik Steinzhorn, Frank
[Contribution to a book] Freiformschmieden - Einführung In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd. 2: Handbuch Umformen / [die Hrsg.:] Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 208-209, 2012	Heil, Hans-Peter Hirt, Gerhard Recker, Dominik Stenzhorn, Frank
[Contribution to a book] Walzen von Blechen und Profilen mit belastungsangepasster Dickenverteilung In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd. 2: Handbuch Umformen / [die Hrsg.:] Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 163-166, 2012	Hirt, Gerhard
[Contribution to a book] Hybrid Production Systems In: Integrative production technology for high-wage countries / Christian Brecher, ed., 435-696, 2012	Hirt, Gerhard Bleck, Wolfgang Bobzin, Kirsten Brecher, Christian Bührig-Polaczek, Andreas et al.
[Contribution to a conference proceedings] Current Aspects of Modelling in Hot Rolling In: 4th International Conference on Thermomechanical Processing of Steels, TMP 2012, 10 Sep 2012 - 12 Sep 2012, University of Sheffield, Sheffield, UK, 00.3 hirt.pdf, 2012	Hirt, Gerhard Bambach, Markus Seuren, Simon Henke, Thomas
[Contribution to a book] Wechselwirkung zwischen Maschine und Walzgut In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd 2. Handbuch Umformen / Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 118-123, 2012 [DOI: 10.3139/9783446430044]	Hirt, Gerhard Oligschläger, Marius
[Contribution to a book] Längswalzen von Flachprodukten In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd. 2: Handbuch Umformen / [die Hrsg.:] Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 111-118, 2012	Hirt, Gerhard Oligschläger, Marius Seuren, Simon
[Contribution to a book] Übersicht über die Walzverfahren In: Handbuch der Fertigungstechnik / hrsg. von Günter Spur und Theodor Stöferle. - Bd 2. Handbuch Umformen / Hartmut Hoffmann; Reimund Neugebauer; Günter Spur, 109-111, 2012	Hirt, Gerhard Oligschläger, Marius
[Journal Article] Herstellung frei geformter, selbst tragender Faltstrukturen aus Stahlblech mit der inkrementellen Blechufmormung (IBU) In: Stahlbau, 81 (12), 959-967, 2012 [DOI: 10.1002/stab.201201637]	Trautz, Martin Heyden, Willi Herkrath, Ralf Pofahl, Thorsten Christian Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings] Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming In: Future Trends in Production Engineering : Proceedings of the first Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011 / Günther Schuh ... (eds.), 287-295, 2012 [DOI: 10.1007/978-3-642-24491-9_28]	Göttmann, Alexander (Corresponding author) Korinth, Marcus Christopher Schäfer, V. Taleb-Araghi, Babak Bambach, Markus et al.
[Contribution to a book] Improving the Efficiency of Incremental Sheet Metal Forming In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, 551-590, 2012	Bleck, Wolfgang Hirt, Gerhard Loosen, Peter Poprawe, Reinhart Reisgen, Uwe et al.
[Contribution to a book] Incremental Sheet Forming In: Sheet Metal Forming : Processes and Applications / ed. by Taylan Altan ..., 273-285, 2012	Hirt, Gerhard Bambach, Markus
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Current objectives and approaches in simulation and modelling of rolling processes In: Matériaux et techniques, 100 (Special Issue), 10-15, 2012	Hirt, Gerhard Jenkouk, Vahid Romans, Thijs Seuren, Simon
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Implementation of Closed-loop Control Systems in Finite Element Simulations fo Roller Leveling In: Matériaux et techniques, 100 (Special Issue), 1-14, 2012	Oligschläger, Marius Hirt, Gerhard
[Contribution to a conference proceedings] Process Planning, Online Optimization and Through Process Microstructure Modelling in Forming and Ring Rolling In: 32. SENAFOR - 16. Forging International Conference, 22.-24. Oktober 2012, Porto Alegre, Brasilien / Hrsg.: Lirio Schaeffer ; Alexandre da Silva Rocha, 33-47, 2012	Hirt, Gerhard Recker, Dominik Henke, Thomas Jenkouk, Vahid
[Contribution to a conference proceedings] Design and Manufacting of Self-Supporting Architectural Free-Form Structures using Incremental Sheet Forming In: 32. SENAFOR - 16. Forging International Conference, 22.-24. Oktober 2012, Porto Alegre, Brasilien / Hrsg.: Lirio Schaeffer ; Alexandre da Silva Rocha, CH05, 2012	Bailly, David Taleb-Araghi, Babak Hirt, Gerhard Trautz, Martin Herkrath, Ralf
[Abstract, Contribution to a book, Contribution to a conference proceedings] Sensitivity Analysis of a Force and Microstructure Model for Plate Rolling In: Metal forming 2012 : proceedings of the 14th International Conference on Metal Forming; September 16 - 19, 2012, AGH University of Science and Technology, Krakow, Poland / ed. by Jan Kusiak ..., 91-94, 2012	Seuren, Simon Willkomm, Johannes Bücker, Hans Bambach, Markus Hirt, Gerhard
[Abstract, Contribution to a book, Contribution to a conference proceedings, Journal Article] Effects of the Variation of Profile Shape on the Geometric Accuracy and Microstructure in Profile Strip Casting In: Steel research international, 83, 191, 2012	Daamen, Markus Vidoni, Michele Henke, Lars Hirt, Gerhard
[Journal Article] Elastic properties of face-centred cubic Fe-Mn-C studied by nanoindentation and ab initio calculations In: Acta materialia, 60 (17), 6025-6032, 2012 [DOI: 10.1016/j.actamat.2012.07.038]	Reeh, Stephanie Music, Denis Gebhardt, Thomas Kasprzak, M. Jäpel, T. et al.
[Contribution to a book, Contribution to a conference proceedings] Vom Werkstoff zum Produkt - Ausblick auf das nächste ASK-Umformtechnik In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 307-316, 2012	Hirt, Gerhard Bambach, Markus
[Contribution to a conference proceedings] Void closure in heavy ingots - a comparision of rolling and open die forging In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, O, 5 S., 2012	Seuren, Simon Romans, Thijs Recker, Dominik Rosenstock, Dirk Bambach, Markus et al.
[Contribution to a conference proceedings] Optimisation of a basic pass schedule for open die forming with regards to a homogeneous strain distribution along the core In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, W, 5 S., 2012	Rosenstock, Dirk Recker, Dominik Franzke, Martin Hirt, Gerhard
[Contribution to a conference proceedings] Fast, model based grain size calculation of open die forgings on basis of pass schedules In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, X, 5 S., 2012	Rosenstock, Dirk Recker, Dominik Henke, Thomas Franzke, Martin Hirt, Gerhard
[Contribution to a conference proceedings] 3D-FE simulation of ring rolling with integrated closed-loop tool motion control In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, R, 9 S., 2012	Jenkouk, Vahid Hirt, Gerhard Franzke, Martin
[Journal Article] Finite element analysis of the ring rolling process with integrated closed-loop control In: CIRP annals : manufacturing technology, 61 (1), 267-270, 2012 [DOI: 10.1016/j.cirp.2012.03.115]	Jenkouk, Vahid Hirt, Gerhard Franzke, Martin Zhang, T.
[Contribution to a book, Contribution to a conference proceedings] Manufacturing of cranial implants using incremental sheet metal forming In: 1st International Conference on Design and Processes for Medical Devices : PROMED 2012 ; Padenghe sul Garda, Brescia, Italy, May 2-4, 2012 / Hrsg.: Elisabetta Ceretti, Univ. of Brescia, 287-290, 2012	Göttmann, Alexander Korinth, M. Taleb-Araghi, Babak Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Konzepte zur integrierten Modellierung von Gefüge- und Fließspannungsentwicklung in der Simulation von Warmumformprozessen In: Tagungsband 13. Roundtable 'Simulation in der Umformtechnik' : simulating manufacturing ; 23. - 26. April 2012, Bamberg / Hrsg.: Michael Wohlmuth ..., 117-139, 2012	Bambach, Markus Seuren, Simon Henke, Thomas Heppner, Stephan Xiong, Wei et al.
[Journal Article] Tailored Profiles Made of Tailor Rolled Strips by Roll Forming - Part 1 of 2 In: Steel research international, 83 (1), 100-105, 2012 [DOI: 10.1002/srin.201100269]	Hirt, Gerhard Dávalos-Julca, Daniel H.
[Journal Article] A new tool concept for rotary peen forming with defined impact positions In: Key engineering materials, 504/506 (1), 925-930, 2012 [DOI: 10.4028/www.scientific.net/KEM.504-506.925]	Russig, Christoph Bambach, Markus Hirt, Gerhard
[Abstract, Contribution to a conference proceedings] Hot forming and characterization of forming behavior of three ternary Fe-Mn-C high-manganese steels In: 1st International Conference on High Manganese Steels, 15.-18. Mai 2011, Seoul, Korea, 2011	Hirt, Gerhard
[Contribution to a conference proceedings] Integrative Simulation des U/O-Umformens und des UP-Schweißens für die Berechnung von Verzug und Eigenspannung In: Sysweld Forum 2011: 25.-26. October 2011, Weimar, Tagungsband, Herausgeber: Jörg Hildebrand..., 191-200, 2011	Reisgen, Uwe Rossiter, E. Henke, Thomas Bambach, Markus Hirt, Gerhard
[Contribution to a book] Steigerung der Leistungsfähigkeit der inkrementellen Blechumformung In: Integrative Produktionstechnik für Hochlohnländer / Hrsg.: Christian Brecher, Werkzeugmaschinenlabor (WZL) der RWTH Aachen, Lehrstuhl für Werkzeugmaschinen, 590-632, 2011	Bleck, Wolfgang Hirt, Gerhard Loosen, Peter Poprawe, Reinhart Reisgen, Uwe et al.
[Journal Article] Hohlwellen für Windkraftanlagen Prozessauslegung anhand von FEM-Simulationen In: Industrie-Management : Zeitschrift für industrielle Geschäftsprozesse, 2011 (2), 73-76, 2011	Hirt, Gerhard Schafer, David Franzke, Martin
[Journal Article] Crystalline γ-Al2O3 Physical Vapour Deposition-Coating for Steel Thixoforging Tools In: Journal of nanoscience and nanotechnology, 11 (10), 8782-8785, 2011 [DOI: 10.1166/jnn.2011.3469]	Bobzin, Kirsten Hirt, Gerhard Bagcivan, Nazlim Khizhnyakova, Liudmila Ewering, Mara Therese
[Contribution to a book] Hybride Produktionssysteme In: Integrative Produktionstechnik für Hochlohnländer / Hrsg.: Christian Brecher, Werkzeugmaschinenlabor (WZL) der RWTH Aachen, Lehrstuhl für Werkzeugmaschinen, 465-745, 2011 [DOI: 10.1007/978-3-642-20693-1_5]	Hirt, Gerhard Bleck, Wolfgang Bobzin, Kirsten Brecher, Christian Bührig-Polaczek, Andreas et al.
[Journal Article] FEM-Simulation des Werkzeugversagens beim Warmmassivumformprozessen infolge thermisch-mechanischer Materialermüdung In: Schmiede-Journal, 09 (02), 42-46, 2011	Behrens, Bernd-Arno Bouguecha, Anas Hadifi, Tarik Hirt, Gerhard Franzke, Martin et al.
[Journal Article] Numerical and experimental analysis of electric conductive heating for micro warm coining of stainless steel In: Production engineering, 5 (6), 629-639, 2011 [DOI: 10.1007/s11740-011-0345-7]	Zhao, Kunning Wietbrock, Burkhard Hirt, Gerhard
[Journal Article] Umformen und Hinterspritzen mit Ansage In: Kunststoffe / [Deutsche Ausgabe], 101 (5), 67-71, 2011	Michaeli, Walter Hopmann, Christian Mäsing, Roland Hirt, Gerhard Reinartz, Heinz
[Journal Article] Predictive Forming and Backmolding In: Kunststoffe / Kunststoffe international, 101 (5), 37-40, 2011	Michaeli, Walter Hopmann, Christian Mäsing, Roland Hirt, Gerhard Reinartz, Heinz
[Book] SIBUform - Steigerung der Produktivität und des Anwendungsspektrums bei inkrementeller Blechumformung durch Kombination mit Streckziehen In: Forschung für die Praxis : P 738, 2011	Hirt, Gerhard Bambach, Markus Taleb-Araghi, Babak Malik, Adam Vitr, Mirco et al.
[Contribution to a conference proceedings] Parametric modelling of complex open die forming processes In: 31. Senafor : 15a conferencia internacional de forjamento - Brasil = 15th international forging conference Brazil ; Porto Alegre, 5,6 e 7 de outubro de 2011 / Ed. par Lirio Schaeffer u. Alexandre da Silva Rocha, 130-140, 2011	Schäfer, David Medeiros, Gian Paulo Colombo, Tiago Hirt, Gerhard Schaeffer, Lirio
[Contribution to a book, Contribution to a conference proceedings] The Development of a New Peen Forming Process - Rotary Peen Forming In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - Vol. 1: 10th ICTP 2011, Aachen, Germany. <2> Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011 : September 25 - 30, 2011, Aachen, Germany, 1126-1131, 2011	Bambach, Markus Russig, Christoph Hirt, Gerhard Alwood, Julian
[Contribution to a book, Contribution to a conference proceedings] Numerical and Experimental Analysis of Closed Die Micro Warm Coining of Stanless Steel In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - T. proc. Proceedings, 133-138, 2011	Zhao, Kunning Wietbrock, Burkhard Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Size Effects of (Flexible) Rolling of Wire and Micro Strip In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - Vol. 1: 10th ICTP 2011, Aachen, Germany. <2> Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011 : September 25 - 30, 2011, Aachen, Germany, 1066-1071, 2011	Romans, Thijs Flesch, Gregor Wietbrock, Burkhard Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Experimental and Numerical Investigation of Double Roller Casting of Strip with Profiled Cross Section In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - Vol. 2: 10th ICTP 2011, Aachen, Germany [10] / Special edition: 10th International Conference on Technology of Plasticity, ICTP 2011, 93-98, 2011	Daamen, Markus Förster, Timo Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Investigations into the Process Mechanics of the Hybrid Process Combination of Stretch Forming and Incremental Sheet Forming In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - Vol. 2: 10th ICTP 2011, Aachen, Germany [10] / Special edition: 10th International Conference on Technology of Plasticity, ICTP 2011, 519-524, 2011	Taleb-Araghi, Babak Bambach, Markus Hirt, Gerhard Zettler, Joachim
[Contribution to a book, Contribution to a conference proceedings] Investigations of the Plain Strain Compression of am Oligocrystalline Specimen In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - Vol. 2: 10th ICTP 2011, Aachen, Germany [10] / Special edition: 10th International Conference on Technology of Plasticity, ICTP 2011, 802-807, 2011	van Putten, Koos Roters, Frank Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Lightweight Design by Flexible Rolling and Strip Profile Rolling In: ICTP 2011 : Proceedings of the 10th International Conference on Technology of Plasticity ; 25-30 September 2011, Aachen. / Ed. by: Gerhard Hirt ; A. Erman Tekkaya. [Organizing inst.: Institute of Metal Forming from RWTH Aachen University ; Institute of Forming Technology and Lightweight Construction from Technische Universität Dortmund. On behalf of: German Metal Forming Association]. - Vol. 2: 10th ICTP 2011, Aachen, Germany [10] / Special edition: 10th International Conference on Technology of Plasticity, ICTP 2011, 117-122, 2011	Davalos Julca, Daniel Förster, Timo Wietbrock, Burkhard Hirt, Gerhard
[Journal Article] Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production In: Production engineering, 5 (4), 393-404, 2011 [DOI: 10.1007/s11740-011-0325-y]	Taleb-Araghi, Babak Göttmann, Alexander Bambach, Markus Hirt, Gerhard Bergweiler, Georg et al.
[Contribution to a book, Contribution to a conference proceedings] Experimental Uncertainties affecting the Accuracy of Stress-Strain Equations by the Example of a Hensel-Spittel Approach In: The 14th International Conference on Material Forming : ESAFORM 2011 proceedings ; Queen's University Belfast, 27 - 29 April 2011 / ed. Gary Menary .... - Pt. 1, 71-76, 2011 [DOI: 10.1063/1.3589494]	Henke, Thomas Bambach, Markus Hirt, Gerhard
[Journal Article] Fast models for online-optimization during open die forging In: CIRP annals : manufacturing technology, 60 (1), 295-298, 2011 [DOI: 10.1016/j.cirp.2011.03.142]	Recker, Dominik Franzke, Martin Hirt, Gerhard
[Contribution to a book, Journal Article] Modeling the Flow Behavior of a High-Manganese Steel Fe-Mn23-C0.6 in Consideration of Dynamic Recrystallization In: Steel research international, 82 (2), 127-136, 2011 [DOI: 10.1002/srin.201000263]	Xiong, Wei Wietbrock, Burkhard Saeed-Akbari, Alireza Bambach, Markus Hirt, Gerhard
[Journal Article] Enhanced Homogenization Strategy by Electroslag Remelting of High-Manganese TRIP and TWIP Steels In: Advanced engineering materials, 13 (5), 395-399, 2011 [DOI: 10.1002/adem.201000322]	Reitz, Jan Bertil Wietbrock, Burkhard Richter, Silvia Hoffmann, Sascha Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Investigation on Incremental Sheet Forming combined with Laser Heating and Stretch Forming for the production of lightweight structures In: Key engineering materials, 473, 919-928, 2011 [DOI: 10.4028/www.scientific.net/KEM.473.919]	Taleb-Araghi, Babak Göttmann, Alexander Bergweiler, Georg Saeed-Akbari, Alireza Bültmann, Jan et al.
[Journal Article] Experimental and numerical investigations of the plane strain compression of an oligocrystalline pure copper specimen In: Journal of materials processing technology, 211 (8), 1305-1323, 2011 [DOI: 10.1016/j.jmatprotec.2011.03.003]	van Putten, Koos Roters, Frank Kirch, Dirk M. Hirt, Gerhard
[Journal Article] Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts In: Production engineering, 5 (3), 263-271, 2011 [DOI: 10.1007/s11740-011-0299-9]	Göttmann, Alexander Diettrich, Joerg Bergweiler, Georg Bambach, Markus Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Micro Warm Coining of Stainless Steel Sheets Using Electric Conductive Heating In: Key engineering materials, 473, 991-998, 2011 [DOI: 10.4028/www.scientific.net/KEM.473.991]	Zhao, Kunning Wietbrock, Burkhard Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Design for manufacture based on an integrated product process design model In: Key engineering materials, 473, 799-806, 2011 [DOI: 10.4028/www.scientific.net/KEM.473.799]	Voswinckel, Holger Schleifenbaum, Johannes Henrich Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Effect of Temperature, Strain rate, Manganese and Carbon Content on flow Behavior of three Ternary Fe-Mn-C (Fe-Mn23-C0.3, Fe-Mn23-C0.6, Fe-Mn28-C0.3) High-Manganese Steels In: Steel research international, 82 (1), 63-69, 2011 [DOI: 10.1002/srin.201000248]	Wietbrock, Burkhard Xiong, Wei Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Strip Casting of a High-Manganese Steel (FeMn22C0.6) Compared with a Process Chain Consisting of Ingot Casting and Hot Forming In: Steel research international, 82 (1), 70-75, 2011 [DOI: 10.1002/srin.201000267]	Daamen, Markus Wietbrock, Burkhard Richter, Silvia Hirt, Gerhard
[Contribution to a conference proceedings] New Cold Rolling Technologies for Lightweight Design and Functional Riblet Surfaces In: SMEA Conference - Advances in Metals Manufacturing Technologies, 22.-23. Juni 2010, Sheffield / England, 2010	Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Geometric Factors for Fast Calculation of Roll Force in Plate Rolling In: Proceedings of the 10th International Conference on Steel Rolling : September 15 - 17, 2010, Beijing, China / organized by the Chinese Society for Metals, 134-141, 2010	Hirt, Gerhard
[Journal Article] Physical and Numerical Simulation of Cold Rolling of an AlFeSi Alloy in Consideration of Static Recovery In: Advanced engineering materials, 12 (3), 141-146, 2010 [DOI: 10.1002/adem.201000024]	Heering, Christoph Li, Xiaoli Bambach, Markus Hirt, Gerhard
[Journal Article] Grain size prediction during open die forging processes In: Metallurgia italiana, 2010 (9), 29-35, 2010	Recker, Dominik Franzke, Martin Hirt, Gerhard Rech, Ralf Steingiesser, K.
[Journal Article] Numerical prediction of microstructure in high-strength ductile forging parts In: Computer methods in materials science = Informatyka w technologii materialów, 10 (4), 271-278, 2010	Back, Arthur Urban, Marcus Keul, Christoph Alexander Bleck, Wolfgang Hirt, Gerhard
[Contribution to a conference proceedings] Bulk Metal Formed Parts for Power Plants In: 30. SENAFOR : 14a Conferencia Internacional de Forjamento Brasil = 14th Forging International Conference Brazil ; Porto Alegre, October 20-22, 2010 / Ed. por/Ed. by Lirio Schaeffer ..., 81-92, 2010	Schäfer, David Franzke, Martin Hirt, Gerhard
[Contribution to a conference proceedings] Recent Developments in Metal Forming In: Workshop on metal forming and autonomous systems : RWTH Aachen Univ. and DAIDO Univ. Joint Symposium ; Aachen, 14th and 15th October 2010 / RWTH Aachen Univ., Inst. f. Bildsame Formgebung (ibf), 111-136, 2010	Hirt, Gerhard Heppner, Stephan
[Contribution to a conference proceedings] New Methods for Computer-Assisted Optimization of Forging Die Life In: 30. SENAFOR : 14a Conferencia Internacional de Forjamento Brasil = 14th Forging International Conference Brazil ; Porto Alegre, October 20-22, 2010 / Ed. por/Ed. by Lirio Schaeffer ..., 325-344, 2010	Lopez Santaella, Mauricio Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Phenomenological microstructure simulation of incremental bulk metal forming using a multi mesh method In: NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009) / Hrsg. Frederic Barlat ..., 1142-1149, 2010 [DOI: 10.1063/1.3457511]	Hirt, Gerhard Schäfer, David
[Contribution to a book, Contribution to a conference proceedings] Prediction of Microstructure in High‐Strength Ductile Forging Parts In: NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009) / Hrsg. Frederic Barlat ..., 1039-1046, 2010 [DOI: 10.1063/1.3457497]	Urban, Marcus Keul, Christoph Alexander Back, Arthur Bleck, Wolfgang Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Integrative Bearbeitung von Fleinblechen: Werkzeugfertigung, Streckziehen und Endbearbeitung auf einer Maschine In: Tagungsband / 2nd International Conference on Advanced Metal Forming Processes in Automotive Industry, AutoMetForm 2010 ; in Verbindung mit 17. Sächsische Fachtagung Umformtechnik, SFU 2010 : 24. - 26. November 2010, Institut für Metallformung = Proceedings / 2nd International Conference on Advanced Metal Forming Processes in Automotive Industry, AutoMetForm 2010 ; in association with 17st [i.e. 17th] Saxon Conference on Forming Technology, SFU 2010 / Technische Universität Bergakademie Freiberg ... Hrsg.: Rudolf Kawalla, 162-174, 2010	Hirt, Gerhard Taleb-Araghi, Babak Voswinckel, Holger
[Journal Article] Entwicklung eines hochfesten duktilen bainitischen (HDB) Stahls für hochbeanspruchte Schmiedebauteile In: Schmiede-Journal, 2010 ([9]), 28-31, 2010	Keul, Christoph Alexander Urban, Marcus Back, Arthur Hirt, Gerhard Bleck, Wolfgang
[Journal Article] Schnelle Modelle zur Simulation der Gefügeevolution beim Ringwalzen In: HTM - journal of heat treatment and materials, 65 (6), 287-298, 2010	von Hehl, Axel Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Selected trends for metal forming innovations In: Steel research international, 81 (9, [Suppl.]), 17-24, 2010	Hirt, Gerhard Heppner, Stephan
[Journal Article] Investigations on Semi-solid Joined Steel Components and their Bonding Quality In: Steel research international, 7 (81), 589-596, 2010 [DOI: 10.1002/srin.201000028]	Hirt, Gerhard Baadjou, René Knauf, Frederik
[Journal Article] Metal flow and die wear in semi-solid forging of steel using coated dies In: Transactions of Nonferrous Metals Society of China : english edition, 20 (Supplement 3), 954-960, 2010 [DOI: 10.1016/s1003-6326(10)60613-9]	Khizhnyakova, L. Ewering, Mara Therese Hirt, Gerhard Bobzin, Kirsten Bagcivan, Nazlim
[Contribution to a conference proceedings, Journal Article] Semi-solid forming of non axis-symmetric parts from steel grade X210CrW12 with PVD coated tools In: International journal of material forming, 3 (1), 731-734, 2010 [DOI: 10.1007/s12289-010-0874-1]	Hirt, Gerhard Bobzin, Kirsten Khizhnyakova, Liudmila Ewering, Mara Therese Bagcivan, Nazlim
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Development of hybrid incremental sheet forming processes In: Steel research international, 81 (Nr. 9, [Suppl.]), No. 419, 2010	Taleb-Araghi, Babak Göttmann, Alexander Bambach, Markus Biermann, Tim Hirt, Gerhard et al.
[Contribution to a book, Contribution to a conference proceedings] New high strength ductile bainitic forging steels In: Supplemental proceedings, TMS 2010 139th annual meeting& exhibition : held Februrary 14 - 18, in Seattle, Wash., USA. - Volume 3: General Paper Selections, 245-252, 2010	Keul, Christoph Alexander Urban, Marcus Fischer, Martin Hirt, Gerhard Bleck, Wolfgang
[Contribution to a book, Contribution to a conference proceedings] Hochdruckblechumformung durch Kunststoffhinterspritzen In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 165-174, 2010	Reinartz, Heinz Mäsing, Roland Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Rolling of Drag Reducing Riblet Surface In: 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference : [including the 18th AIAA/ASME/AHS Adaptive Structures Conference, the 12th AIAA Non-Deterministic Approaches Conference, the 11th AIAA Gossamer Systems Forum, and the 6th AIAA Multidisciplinary Design Optimization Specialist Conference] ; 12 - 15 April 2010, Orlando, Florida ; [papers], 2010	Romans, Thijs Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Globale Herausforderungen: Impulse für die Umformtechnik In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 15-24, 2010	Hirt, Gerhard Heppner, Stephan
[Contribution to a book, Contribution to a conference proceedings] Schnelle Modelle zur Online-Optimierung beim Freiformschmieden In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 35-44, 2010	Recker, Dominik Franzke, Martin Hirt, Gerhard Rech, Ralf
[Contribution to a book, Contribution to a conference proceedings] Flexibles Profilieren nahtloser Ringe aus Stahl In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 47-56, 2010	Goldbach, Viola Hirt, Gerhard Michl, Dennis Tiedemann, Ingo
[Contribution to a book, Contribution to a conference proceedings] Geometriefaktoren für die schnelle Berechnung von Walzkräften In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 71-80, 2010	Seuren, Simon Hirt, Gerhard Bambach, Markus
[Contribution to a book, Contribution to a conference proceedings] Walzen feiner Riblet-Oberflächen zur Reduktion von Strömungswiderständen In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 89-98, 2010	Romans, Thijs Thome, Mario Klumpp, Stephan Werner Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Hybride inkrementelle Blechumformung (IBU) für Leichtbaustrukturen In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 109-118, 2010	Taleb-Araghi, Babak Göttmann, Alexander Bambach, Markus Hirt, Gerhard
[Abstract, Contribution to a conference proceedings] Adaptive meshing for the thermo-mechanical simulation of incremental bulk metal forming processes In: IV European Conference on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering : Paris, France, May 16-21, 2010, 2010	Schäfer, David Hirt, Gerhard
[Journal Article] Homogenization strategy and material characterization of high-manganese TRIP and TWIP steels In: Materials science forum, 638/642, 3134-3139, 2010 [DOI: 10.4028/www.scientific.net/MSF.638-642.3134]	Wietbrock, Burkhard Bambach, Markus Seuren, Simon Hirt, Gerhard
[Journal Article] Ansätze zur Qualitätsoptimierung beim Freiformschmieden In: Stahl und Eisen, 130 (3), 39-46, 2010	Recker, Dominik Hirt, Gerhard Franzke, Martin
[Journal Article] Verbesserte numerische Prozesssimulation mittels eines innovativen Reibgesetzes für die Warmmassivumformung In: Schmiede-Journal, 2010 (März 2010), 20-24, 2010	Behrens, Bernd-Arno Bouguecha, Anas Mielke, Jens Hirt, Gerhard Bambach, Markus et al.
[Contribution to a conference proceedings, Journal Article] Experimental and numerical investigation of grid sheet bending behaviour in four-roll bending In: CIRP annals : manufacturing technology, 59 (1), 303-306, 2010 [DOI: 10.1016/j.cirp.2010.03.015]	Gu, Xiaobo Franzke, Martin Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Derivation of Recovery Kinetics From Stress Relaxation Tests In: Advanced engineering materials, 12 (3), 127-130, 2010 [DOI: 10.1002/adem.201000025]	Hirt, Gerhard Heering, Christoph Gottstein, Günter Mohles, Volker Bhaumik, Sheila
[Journal Article] Size effects on miniaturised rolling processes In: Ironmaking & steelmaking, 37 (4), 283-289, 2010 [DOI: 10.1179/030192310X12646889255861]	van Putten, Koos Hirt, Gerhard
[Journal Article] Numerical analysis of stake mark induced failure of a rotor shaft In: Steel research international, 81 (1), 74-84, 2010 [DOI: 10.1002/srin.200900095]	Bambach, Markus Hirt, Gerhard Al-Baouni, Mohammed Kilpatrick, N. Soto, St. et al.
[Journal Article] Hot Forging of C45 using PVD (Ti,Al)N/γ-Al2O3 Coated Dies In: Steel research international, 81 (7), 603-609, 2010 [DOI: 10.1002/srin.201000031]	Bobzin, Kirsten Hirt, Gerhard Springorum, F. Zitz, U. Steinhof, N. et al.
[Contribution to a book, Contribution to a conference proceedings] Bedeutung von Größeneffekten für die Mikro-Blechumformung In: Größeneinflüsse bei Fertigungsprozessen : Beiträge zum Abschlusskolloquium des SSP 1138, Bonn, 11. - 12. Februar 2009 / Bias, Bremer Institut für Angewandte Strahltechnik. F. Vollertsen (Hrsg.), 117-133, 2009	Hirt, Gerhard
[Book] Thixoforming : semi-solid metal processing, 2009	Hirt, Gerhard (Editor) Kopp, Reiner (Editor)
[Contribution to a book, Contribution to a conference proceedings] Experimental procedures for characterization of static recovery in cold rolling processes of AlFeSi alloys In: Light Metals 2009 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2009 annual meeting & exhibition, San Francisco, California, USA, February 15 - 19, 2009 / ed. by Geoff Bearne, 1227-1232, 2009	Heering, Christoph Li, Xiaoli Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Neuere Entwicklungen bei der inkrementellen Umformung von Blechen In: Der Markt im Umbruch - Erfolg mit innovativen Strategien, Maschinen, Prozessen : 10. Umformtechnisches Kolloquium Darmstadt ; 17. und 18. März 2009 ; [Tagungsband] / Veranstalter: Institut für Fertigungsforschung e.V. in Zusammenarbeit mit: Institut für Produktionstechnik und Umformmaschinen, Technische Universität Darmstadt, 189-199, 2009	Hirt, Gerhard Bambach, Markus Taleb-Araghi, Babak Göttmann, Alexander
[Contribution to a conference proceedings] Micro Coining to Create Functional Surfaces In: Proceedings of the 5th International Seminar on Precision Forging March 16 - 19, 2009, Kyoto TERRSA, Kyoto, Japan, 189-192, 2009	Wietbrock, Burkhard Zhao, Kunning Hirt, Gerhard
[Contribution to a conference proceedings] Determination of a Geometric Factor for the Calculation of Roll Force in Plate Rolling by means of Finite Element Simulations In: 5th European Rolling Conference, 23 - 25 June 2009, London, UK, ERC5 : [proceedings] / IOM Communications Ltd., 2009	Seuren, Simon Philipp, M. Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings] Rolling of Aluminium Riblet-Surface In: European Aluminium Congress 2009, 23.-24. November 2009 in Düsseldorf, Session 5, Paper 5, 2009	Romans, Thijs Wietbrock, Burkhard Thome, Mario Hirt, Gerhard
[Contribution to a conference proceedings] Semi-Solid Forging and Joining of Steel Components and their Properties In: 2nd SINO-German Workshop on Metal Forming Processes and Technologies, 5.-10. April 2009 in Dortmund, Veröffentlichung im Tagungsband-CD, 2009	Baadjou, René Knauf, Frederik Hirt, Gerhard
[Contribution to a conference proceedings] Experimental investigations of grid sheet bending behaviour In: 2nd SINO-German Workshop on Metal Forming Processes and Technologies, 5.-10. April 2009 in Dortmund, Veröffentlichung im Tagungsband-CD, 2009	Gu, Xiaobo Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Strip Profile Rolling: A method to produce tailor strips for lightweight profiles In: XXIX SENAFOR : 12a Conferencia Internacional de Forjamento Brasil = 12th National Conference on Sheet Metal Forming ; 14.-16. Oktober 2009 in Porto Alegre Brasilien, 203-216, 2009	Davalos Julca, Daniel Hirt, Gerhard Groche, Peter Mirtsch, Michael
[Contribution to a book, Contribution to a conference proceedings] Roll wear analysis and rolling force reduction through lubrication during the hot rolling operation of a twin roll casting process In: XXIX SENAFOR : 12a Conferencia Internacional de Forjamento Brasil = 12th National Conference on Sheet Metal Forming ; 14.-16. Oktober 2009 in Porto Alegre Brasilien, 241-258, 2009	Kane-Garcia, William Gräf, Gerhard Hirt, Gerhard Ernenputsch, Lutz Klos, Wilfried et al.
[Contribution to a conference proceedings] Homogenization strategy and material characterization of highmanganese TRIP and TWIP steels In: Thermec 2009 6th International Conference on Processing & Manufacturing of Advanced Materials; Berlin, Germany, August 25 - 29, 2009, 206-206, 2009	Wietbrock, Burkhard Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Optimization of tailored products In: Computational plasticity X : fundamentals and applications ; proceedings of the X International Conference on Computational Plasticity - fundamentals and applications held in Barcelona, Spain, 02 - 04 September 2009 / a publ. of: International Center for Numerical Methods in Engineering (CINME) Ed. by: E. Oñate ..., 2009	Urban, Marcus Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Globale Herausforderungen: Neue Märkte für die Umformtechnik In: Tagungsband zum 24. Aachener Stahlkolloquium Metallurgie : [Rohstoffe, Werkstoffe, Gesellschaft] ; 17. und 18. September 2009, Eurogress Aachen / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout u. red. Bearb.: Andrea Brings ...], 331-342, 2009	Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Grain size prediction during open die forging processes In: Hot Forming of Steels & Product Properties : international conference ; Grado, Italy, 13 - 16 September 2009 ; proceedings / organized by Associazione Italiana di Metallurgia - AIM, 2009	Recker, Dominik Franzke, Martin Hirt, Gerhard Rech, Ralf Steingießer, Klaus
[Journal Article] Innenhochdruck-Umformung von endkonturnahen Tailored Tubes In: Maschinenmarkt : MM, 116 (6), 22-25, 2009	Urban, Marcus Henn, René Hirt, Gerhard
[Journal Article] Riblet Rolling In: Aluminium : international journal for industry, research and application, 85 (7/8), 54-56, 2009	Romans, Thijs Thome, Mario Hirt, Gerhard
[Journal Article] Flexible Verfahren für das Profilieren von nahtlosen Ringen In: Schmiede-Journal, 2009 (9), 37-39, 2009	Goldbach, Viola Hirt, Gerhard
[Journal Article] Strategies to improve the geometric accuracy in asymmetric single point incremental forming In: Production engineering, 3 (2), 145-156, 2009 [DOI: 10.1007/s11740-009-0150-8]	Bambach, Markus Taleb-Araghi, Babak Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Comparison of some final part geometrical characteristics of cylindrical cups manufactured by deep-drawing and two-point incremental sheet forming In: Key engineering materials, 410/411, 355-363, 2009 [DOI: 10.4028/www.scientific.net/KEM.410-411.355]	Taleb-Araghi, Babak Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Cold rolling processes to functionalize semi-finished products In: Light Metals 2009 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2009 annual meeting & exhibition, San Francisco, California, USA, February 15 - 19, 2009 / ed. by Geoff Bearne, 1225-1230, 2009	van Putten, Koos Hirt, Gerhard Thome, Mario Kopp, Reiner
[Contribution to a book, Contribution to a conference proceedings] Comparison of springback behavior for cylindrical cups manufactured by deep drawing and asymmetric incremental sheet forming (ASIF) In: Material property data for more effective numerical analysis : proceedings 2009 : June 1-3, Colorado School of Mines by Bernard S Levy; David K Matlock; C J Van Tyne; International Deep Drawing Research Group. Congress, 857-868, 2009	Taleb-Araghi, Babak Bambach, Markus Manco, Leonardo Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Semi-solid forging and joining of steel components and their properties In: International journal of material forming, Vol. (2,S1), 741-744, 2009 [DOI: 10.1007/s12289-009-0510-0]	Baadjou, René Knauf, Frederik Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Analysis of Semi-Solid Extrusion Products made of Steel Alloy X210CrW12 In: International journal of material forming, 2 (Suppl. 1), 733-736, 2009	Knauf, Frederik Baadjou, René Hirt, Gerhard
[Journal Article] Use of Modern High Strength Steels in Load Adapted Hydroformed B-Pillars In: Steel research international, 80 (1), 16-21, 2009 [DOI: 10.2374/SRI08SP112]	Urban, Marcus Hirt, Gerhard
[Journal Article] Estimation of grain size and grain orientation influence in micro forming processes by taylor factor considerations In: Journal of materials processing technology, 209 (4), 2111-2121, 2009 [DOI: 10.1016/j.jmatprotec.2008.05.008]	Justinger, Holger Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Investigation into a new hybrid forming process: incremental sheet forming combined with stretch forming In: CIRP annals : manufacturing technology, 58.2009 (1), 225-228, 2009 [DOI: 10.1016/j.cirp.2009.03.101]	Taleb-Araghi, Babak Manco, G. L. Bambach, Markus Hirt, Gerhard
[Journal Article] Große Möglichkeiten, große Herausforderungen: Thixoforming von Stahl und Aluminium In: Giesserei-Erfahrungsaustausch, 53 (3), 13-17, 2009	Hirt, Gerhard Baadjou, René Bührig-Polaczek, Andreas Bünck, Matthias
[Contribution to a conference proceedings] High Strength Ductile Bainitic Steel for High Stressed Forged Structurals Parts In: Proceedings of the 5th JSTP International Seminar on Precision Forging : March 16-19, 2009, Kyoto, TERRSA, Kyoto, Japan / [editors Yoshinori Yoshida, Ryo Matsumoto] ; organized by the Japan Society for Technology of Plasticity, 163-166, 2009	Urban, Marcus Keul, Christoph Alexander Bleck, Wolfgang Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Hybrid laser assisted incremental sheet forming - improving formability of Ti- and Mg-based alloys In: Lasers in Manufacturing : LiM 2009 ; Proceedings of the Fifth International WLT-Conference on Lasers in Manufacturing ; under the umbrella of the World of Photonics Congress ; 15 - 18 June 2009 in Munich, Germany / WLT-Wissenschaftliche Gesellschaft für Lasertechnik e.V., 273-278, 2009	Biermann, Tim Göttmann, Alexander Zettler, Joachim Bambach, Markus Weisheit, Andreas et al.
[Contribution to a conference proceedings] Towards Shot Peen Forming of Sandwich and Laminate Sheets: Basic Investigations and First Industrial Applications In: 11th International Conference on Aluminium Alloys - ICAA 2008, 22-26. 11.2008, Aachen, 1836-1843, 2008	Hirt, Gerhard
[Proceedings] Semi-solid processing of alloys and composites X : selected, peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2008, September 16th - 18th, 2008, Aachen, Germany and Liège, Belgium, 2008	Hirt, Gerhard (Editor) Rassili, Ahmed (Editor) Bührig-Polaczek, Andreas (Editor)
[Contribution to a book, Contribution to a conference proceedings] Development of a tailored, hydroformend B-pillar in consideration of the forming history In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT 2008 ; [2nd International Conference on Steels in Cars and Trucks ... took place from June 01 to 05 in Wiesbaden, Germany] / ed. by Bernhard Fuchsbauer und Hans-Joachim Wieland. [Organizer: Steel Institute VDEh, Düsseldorf, Germany], 253-260, 2008	Urban, Marcus Hirt, Gerhard Wallentowitz, Henning Henn, René
[Contribution to a book, Contribution to a conference proceedings] Neue Modellierungsansätze für die konventionelle und hybride inkrementelle Blechumformung In: Conference proceedings / ANSYS Conference & 26. CADFEM Users' Meeting : 22. - 24. Oktober 2008, Darmstadtium Wissenschaft Kongresse, Darmstadt / CADFEM GmbH; ANSYS Germany GmbH, 286-286, 2008	Taleb-Araghi, Babak Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Production of blanks with thickness transitions in longitudinal and lateral direction through 3D-strip profile rolling In: International journal of material forming, 1 (Suppl. 1), 391-394, 2008 [DOI: 10.1007/s12289-008-0077-1]	Ryabkov, Nikolai Jackel, Frank Martin van Putten, Koos Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Semi-solid extrusion of complex-shaped steel rods using ceramic dies In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 141/143, 243-248, 2008 [DOI: 10.4028/www.scientific.net/SSP.141-143.243]	Münstermann, Simon Telle, Rainer Knauf, Frederik Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Validation of an improved dislocation density based flow stress model for Al-alloys In: International journal of material forming, 1 (Suppl.1), 77-80, 2008 [DOI: 10.1007/s12289-008-0040-1]	Mohles, Volker Li, Xiaohui Heering, Christoph Hirt, Gerhard Bhaumik, Sheila et al.
[Contribution to a book] Walzen von mikrostrukturierten Funktionsoberflächen In: Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik : [ `Der Pawelski´ : Festschrift zum 75. Geburtstag von Oskar Pawelski] / Kurt Steinhoff ... (Hrsg.), 233-238, 2008	Hirt, Gerhard Thome, Mario
[Contribution to a book, Contribution to a conference proceedings] Numerical investigations of a load adapted, hydroformed B-pillar In: Numisheet 2008 : International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes ; September 1 - 5, 2008, Interlaken, Switzerland / organization: ETH, Eidgenössische Technische Hochschule Zürich, Institut für Virtuelle Produktion. Ed.: Pavel Hora, 679-684, 2008	Urban, Marcus Henn, René Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Error control in explicit finite element simulations of incremental sheet metal forming In: Numisheet 2008 : International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes ; September 1 - 5, 2008, Interlaken, Switzerland / organization: ETH, Eidgenössische Technische Hochschule Zürich, Institut für Virtuelle Produktion. Ed.: Pavel Hora, 715-720, 2008	Bambach, Markus Taleb-Araghi, Babak Hirt, Gerhard Reimers, W.
[Contribution to a book, Contribution to a conference proceedings] Elastic-plastic bending of welded grid sheet In: Proceedings of the 8th International Conference on Sandwich Structures (ICSS8) ; 6-8 May 2008 Porto, Portugal / Editor: Antonio J. M. Ferreira. - Vol. 2, 969-980, 2008	Hirt, Gerhard Kopp, Reiner Franzke, Martin van Santen, Johan
[Contribution to a book, Contribution to a conference proceedings] Improved remeshing algorithmus for a multi mesh method applied to ring rolling simultion In: ICTP 2008 : Advanced Technology of Plasticity ; 9th international conference on Technology of plasticity : the Olympics of Metal-forming : September 7-11, 2008, Gyeongju, Korea / D.Y. Yang ... Korean Society for Technology of Plasticity, 293-294, 2008	Schäfer, David Hirt, Gerhard Franzke, Martin Barton, Gabriel
[Contribution to a book, Contribution to a conference proceedings] Four-roll bending of welded grid sheet In: ICTP 2008 : Advanced Technology of Plasticity ; 9th international conference on Technology of plasticity : the Olympics of Metal-forming : September 7-11, 2008, Gyeongju, Korea / D.Y. Yang ... Korean Society for Technology of Plasticity, 173-174, 2008	Hirt, Gerhard Franzke, Martin Bambach, Markus van Santen, Johan Harms, Alexander et al.
[Contribution to a book, Contribution to a conference proceedings] The potential of intentional rolling of spread bulges for ring shaped products In: ICTP 2008 : Advanced Technology of Plasticity ; 9th international conference on Technology of plasticity : the Olympics of Metal-forming : September 7-11, 2008, Gyeongju, Korea / D.Y. Yang ... Korean Society for Technology of Plasticity, 341-342, 2008	Goldbach, Viola Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Investigation into the prediction of forming limits in incremental sheet metal forming using damage models In: ICTP 2008 : Advanced Technology of Plasticity ; 9th international conference on Technology of plasticity : the Olympics of Metal-forming : September 7-11, 2008, Gyeongju, Korea / D.Y. Yang ... Korean Society for Technology of Plasticity, 682-683, 2008	Bambach, Markus Hirt, Gerhard
[Contribution to a conference proceedings] Optimization of forging process of profiled discs for low presure trubine rotors by FEM simulation In: IFM 2008 Santander Spain : 17th International Forgemasters Meeting, IFM 2008 ; Santander, Spain, 3 - 7 November 2008 / hosted by: Sidenor, 212-215, 2008	Weides, G. Blaes, N. Bokelmann, D. Hümbert, M. Poppenhäger, J. et al.
[Contribution to a conference proceedings] Flexible axial profile ring rolling In: IFM 2008 Santander Spain : 17th International Forgemasters Meeting, IFM 2008 ; Santander, Spain, 3 - 7 November 2008 / hosted by: Sidenor, 244-250, 2008	Michl, Dennis Hirt, Gerhard Jenkouk, Vahid
[Contribution to a conference proceedings] The open die forging industry associated with the german steel institute VDEh/Germany In: IFM 2008 Santander Spain : 17th International Forgemasters Meeting, IFM 2008 ; Santander, Spain, 3 - 7 November 2008 / hosted by: Sidenor, 2008	Franzke, Martin Hirt, Gerhard Sheikhi, S. Wuppermann, Carl-Dieter Rech, Ralf
[Contribution to a book, Contribution to a conference proceedings] Gekoppelte Analyse von Massivumformprozessen mit LARSTRAN/Shape In: Simulation von Umformprozessen : MEFORM 2008 ; 26. bis 28. März 2008 in Freiberg ; Tagungsband / ACATRAIN e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg; Institut für Metallformung. [Hrsg. Rudolf Kawalla], 119-130, 2008	Franzke, Martin Puchhala, Sreedhar Dackweiler, Harald Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Entwicklung eines Prozessmodells zur Online-Optimierung von Freiformschmiedungen großer Blöcke In: Simulation von Umformprozessen : MEFORM 2008 ; 26. bis 28. März 2008 in Freiberg ; Tagungsband / ACATRAIN e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg; Institut für Metallformung. [Hrsg. Rudolf Kawalla], 275-286, 2008	Franzke, Martin Recker, Dominik Hirt, Gerhard
[Journal Article] Thixoforming von Stahl und Aluminium In: Schmiede-Journal, 2008 (März), 22-25, 2008	Hirt, Gerhard Baadjou, René
[Contribution to a conference proceedings] Recent developments in incremental sheet forming for prototype and small series In: Symposium 'Current State and Future Trend of Metal Forming Technology in Automobile Industries' : Nagoya, Japan, 27. February 2008 / Daido Institute of Technology and RWTH Aachen, 69-80, 2008	Ziegler, Simon Hirt, Gerhard Bambach, Markus
[Contribution to a conference proceedings] Light weight structures by tailor rolled sheets and strips In: Symposium 'Current State and Future Trend of Metal Forming Technology in Automobile Industries' : Nagoya, Japan, 27. February 2008 / Daido Institute of Technology and RWTH Aachen, 1-13, 2008	Hirt, Gerhard Kopp, Reiner
[Contribution to a conference proceedings] Application of the shot peen forming process to sandwich- and laminate structures In: ICSP-10 : 10th International Conference on Shot Peening ; September 15 - 18, 2008 Tokyo, Japan / Conference Chairman: Katsuji Tosha ..., 263-268, 2008	Dackweiler, Harald Hirt, Gerhard
[Contribution to a conference proceedings] Materials modelling in forming simulation In: Symposium 'Current State and Future Trend of Metal Forming Technology in Automobile Industries' : Nagoya, Japan, 27. February 2008 / Daido Institute of Technology and RWTH Aachen, 2008	Li, Xiaoli Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Online calculation of equivalent strain, temperature and microstructure within the workpiece during open die forging In: 28. SENAFOR : 12. Conferencia Internacional de Forjamento = 12th National forging conference ; [held in Porto Alegre, RS, Brazil, October 8-10, 2008] / ed. por Lirio Schaeffer. LDTM, Laboratorio de Transformacao Mecanica, 265-277, 2008	Recker, Dominik Franzke, Martin Hirt, Gerhard
[Contribution to a conference proceedings] Modelling of incremental sheet metal forming In: FInU : 4. Fachtagung Inkrementelle Umformtechnik & International Workshop on Modelling of Incremental Forming Processes ; 19.-21.02.2008, Aachen, 2008	Hirt, Gerhard Bambach, Markus
[Contribution to a conference proceedings] Semi-solid forming and joining of steel In: Current State and Future Trend of Metal Forming Technology in Automobile Industries : Nagoya, Japan, 27. February 2008 ; joint symposium / Daido Institute of Technology and RWTH Aachen, 41-56, 2008	Hirt, Gerhard Baadjou, René Knauf, Frederik
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Investigations on thermal influences for thixoforging and thixojoining of steel components In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 141/143, 37-42, 2008 [DOI: 10.4028/www.scientific.net/SSP.141-143.37]	Baadjou, René Knauf, Frederik Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Increasing of the drawing depth using tailor rolled blanks : numerical and experimental analysis In: International journal of machine tools & manufacture, 48 (5 : Special issue), 522-531, 2008 [DOI: 10.1016/j.ijmachtools.2007.08.003]	Meyer, Alexander Wietbrock, Burkhard Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Modelling and optimisation of incremental bulk metal-forming processes for near net shape components In: International journal of mechatronics and manufacturing systems : IJMMS, 2008, 171-182, 2008 [DOI: 10.1504/IJMMS.2008.020503]	Hofmann, Oliver Hirt, Gerhard Franzke, Martin Schäfter, David
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Near net shaping ring geometries manufactured from spread bulges and flexible axial profiling methods In: Steel research international, 2008 (special ed.), 382-388, 2008	Goldbach, Viola Michl, Dennis Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Recent enhancements in flow stress determination using high-speed compression tests In: Steel research international, special ed., 698-703, 2008	Heering, Christoph Rehrmann, Torsten Kopp, Reiner Hirt, Gerhard
[Journal Article] Development of a process model for online-optimization of open die forging of large workpieces In: Steel research international, 79 (10), 753-757, 2008 [DOI: 10.2374/SRI08SP067]	Franzke, Martin Recker, Dominik Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Rolling of functional metallic surface structures In: CIRP annals : manufacturing technology, 57.2008 (1), 317-320, 2008 [DOI: 10.1016/j.cirp.2008.03.034]	Hirt, Gerhard Thome, Mario
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Process window determination for thixoextrusion processes using a steel alloy In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 141/143, 61-66, 2008	Knauf, Frederik Baadjou, René Hirt, Gerhard
[Journal Article] Adaptive cross-approximation for surface reconstruction using radial basis functions In: Journal of engineering mathematics, 62 (2), 149-160, 2008 [DOI: 10.1007/s10665-007-9197-8]	Hirt, Gerhard Bambach, Markus Grzhibovskis, Richard Rjasanow, Sergej
[Contribution to a book, Journal Article] Umformtechniker walzen metallische Haifischhaut : Untersuchung neuer Methoden zur Herstellung strömungsoptimierter Metalloberflächen In: RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2008 (1), 62-65, 2008 [DOI: 10.18154/RWTH-CONV-011398]	Feldhaus, Björn Klocke, Fritz Hirt, Gerhard Thome, Mario
[Contribution to a book, Contribution to a conference proceedings] Modeling of the hot rolling process of a C45 steel (TP B1) In: Integral materials modeling : towards physics-based through-process models ; [proceedings of the final symposium of the Collaborative Research Center (SFB 370) of the Deutsche Forschungsgemeinschaft on 'Integral Materials Modeling' which took place in Aachen, Germany, on December 1 - 2, 2005] / ed. by Günter Gottstein, 139-148, 2007 [DOI: 10.1002/9783527610983.ch11]	Li, Xinyang Kopp, Reiner Hirt, Gerhard Zeislmair, Barbara Bleck, Wolfgang
[Book, Report, Report] Optimisation of strip casting conditions and surface conditions for coating In: Technical steel research : casting, reheating and direct rolling, 2007	Nicolle, Rémy Lamande, A. Schmitz, W. Leuschner, R. Kopp, Reiner et al.
[Contribution to a book, Contribution to a conference proceedings] Influences of size effects on the rolling of micro strip In: 10th ESAFORM Conference on Material Forming : Zaragoza, Spain, 18 - 20 April 2007 / ed. Elías Cueto ... European Scientific Association for Material Forming, 629-634, 2007 [DOI: 10.1063/1.2729583]	van Putten, Koos Kopp, Reiner Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Influence Of Tool Geometry, Tool Coating And Process Parameters In Thixoextrusion Of Steel In: 10th ESAFORM Conference on Material Forming : Zaragoza, Spain, 18 - 20 April 2007 / ed. Elías Cueto ... European Scientific Association for Material Forming, 1173-1178, 2007 [DOI: 10.1063/1.2729673]	Knauf, Frederik Hirt, Gerhard Immich, Philipp Bobzin, Kirsten
[Contribution to a conference proceedings, Journal Article] Incremental bulk metal forming In: CIRP annals : manufacturing technology, 56 (2), 635-656, 2007 [DOI: 10.1016/j.cirp.2007.10.006]	Groche, Peter Fritsche, D. Tekkaya, E. A. Allwood, Julian M. Hirt, Gerhard et al.
[Proceedings] Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband, 2007	Hirt, Gerhard (Editor)
[Journal Article] Thixoforming of steels - a status report In: Advanced engineering materials, 9 (4), 231-245, 2007 [DOI: 10.1002/adem.200700006]	Püttgen, Wolfgang Bleck, Wolfgang Hirt, Gerhard Shimahara, Hideki
[Contribution to a book, Contribution to a conference proceedings] Incremental Sheet Forming - Process Simulation with LS-Dyna In: 6. LS-DYNA Forum : 11. - 12. Oktober 2007, Frankenthal, C-I-09, 2007	Zettler, J. Rezai, H. Taleb-Araghi, Babak Bambach, Markus Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Herausforderungen und Entwicklungstrends für die Umformtechnik In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 37-52, 2007	Kopp, Reiner Hirt, Gerhard Hofmann, Oliver
[Contribution to a book, Contribution to a conference proceedings] Error Analysis In Explicit Finite Element Analysis Of Incremental Sheet Forming In: Materials processing and design : modeling, simulation and applications ; NUMIFORM '07 ; proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17 - 21 June 2007 / ed. J. M. A. César de Sá ; ; Abel D. Santos, 859-864, 2007 [DOI: 10.1063/1.2740918]	Bambach, Markus Hirt, Gerhard
[Journal Article] Large area rolling of functional metallic micro structures In: Production engineering, 1 (4), 351-356, 2007 [DOI: 10.1007/s11740-007-0067-z]	Hirt, Gerhard Thome, Mario
[Journal Article] Material flow determination for radial flexible profile ring rolling In: Production engineering, 1 (3), 227-232, 2007 [DOI: 10.1007/s11740-007-0030-z]	Tiedemann, Ingo Hirt, Gerhard Michl, Dennis Khangari, Nastaran Kopp, Reiner
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Finite-Element Modeling of Multi-Pass Forging of Nickel-Base Alloys Using a Multi-Mesh Method In: Materials science forum, 539/543, 2503-2508, 2007 [DOI: 10.4028/www.scientific.net/MSF.539-543.2503]	Barton, Gabriel Li, Xiaoli Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Thixoforming von Stahl : ein Überblick In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 89-99, 2007	Bührig-Polaczek, Andreas Hirt, Gerhard Bleck, Wolfgang Küthe, Fabian Shimahara, H. et al.
[Contribution to a book, Contribution to a conference proceedings] Development of two innovative rolling processes for the production of defined riblet structures in consideration of common fluid dynamic requirements In: Proceedings of the 2nd ICNFT: 2nd International Conference on New Forming Technology : Bremen, Germany, September 20 - 21, 2007 ; [at the Bremen Production Days] / bias, Bremer Institut für angewandte Strahlentechnik. F. Vollertsen, S. Yuan (Eds.), 185-194, 2007	Klocke, Fritz Feldhaus, Björn Hirt, Gerhard Thome, Mario Klumpp, Stephan Werner et al.
[Contribution to a book, Contribution to a conference proceedings] New developments in incremental sheet forming In: Proceedings of the 2nd ICNFT: 2nd International Conference on New Forming Technology : Bremen, Germany, September 20 - 21, 2007 ; [at the Bremen Production Days] / bias, Bremer Institut für angewandte Strahlentechnik. F. Vollertsen, S. Yuan (Eds.), 31-40, 2007	Hirt, Gerhard Ames, Jochen Peter Bambach, Markus Ziegler, Simon
[Contribution to a book, Contribution to a conference proceedings] Funktionale Oberflächen auf Al-und Cu-Werkstoffen durch Prägen und Walzen In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 165-174, 2007	Thome, Mario Hirt, Gerhard Kopp, Reiner
[Contribution to a book, Contribution to a conference proceedings] Untersuchungen zur Vermeidung von Oberflächenfehlern beim Freiformschmieden von hochlegierten Stahlen In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 71-80, 2007	Schneider, Verena Hirt, Gerhard Brethfeld, A. Lehmann, G.
[Contribution to a book, Contribution to a conference proceedings] Modellierung inkrementeller Umformverfahren In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 123-134, 2007	Bambach, Markus Barton, Gabriel Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Größeneffekte bei der Miniaturisierung des Drahtflachwalzens und Tiefziehen von Cu-Werkstoffen In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 175-188, 2007	Justinger, Holger van Putten, Koos Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Size effects in micro deep drawing and rolling of flat wire In: XXVII SENAFOR : X Conferência Nacional de Conformaçao de Chapas = X National Sheet Metal Forging Conference, held in Porto Alegre, RS, Brazil, October 18-19, 2007 / ed. por Lirio Schaeffer..., 153-172, 2007	van Putten, Koos Justinger, Holger Hirt, Gerhard Hofmann, Oliver
[Contribution to a book, Contribution to a conference proceedings] Modelling and optimization of incremental bulk metal forming processes for near net shape components In: XXVII SENAFOR : XI Conferência Internacional em Forjamento = International Forging Conference - 2007 / Universidade Federal do Rio Grande do Sul, Centro de Tecnologia, Laboratório de Transformaço Mecânica - LdTM, 115-128, 2007	Hofmann, Oliver Hirt, Gerhard Franzke, Martin Schäfer, David
[Contribution to a book, Contribution to a conference proceedings] Computer-aided toll path optimization for single point incremental sheet forming In: Advanced methods in material forming / Dorel Banabic. International conference of the European Scientific Association for Material Forming ; 8 (Cluj-Napoca) : 2005.04. ESAFORM 2005 ; 8 (Cluj-Napoca) : 2005.04., 233-250, 2007	Bambach, Markus Cannamela, M. Azaouzi, M. Hirt, Gerhard Batoz, J. L.
[Contribution to a book, Contribution to a conference proceedings] Size effect on friction and yielding in wire flat rolling In: Proceedings of the 2nd ICNFT: 2nd International Conference on New Forming Technology : Bremen, Germany, September 20 - 21, 2007 ; [at the Bremen Production Days] / bias, Bremer Institut für angewandte Strahlentechnik. F. Vollertsen, S. Yuan (Eds.), 583-592, 2007	van Putten, Koos Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Scaling effects in the miniaturization of the deep drawing process In: Proceedings of the 2nd ICNFT: 2nd International Conference on New Forming Technology : Bremen, Germany, September 20 - 21, 2007 ; [at the Bremen Production Days] / bias, Bremer Institut für angewandte Strahlentechnik. F. Vollertsen, S. Yuan (Eds.), 665-674, 2007	Justinger, Holger Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Neue Ansätze in der inkrementellen Blechumformung (IBU) : Erweiterung des Anwendungsspektrums durch Verfahrenskombination In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 237-246, 2007	Ames, Jochen Peter Ziegler, Simon Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Herstellung von Tailor Rolled Strips durch Bandprofilwalzen In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 205-212, 2007	Jackel, Frank Martin Hirt, Gerhard Bertram, Franz-Josef Krückels, T.
[Journal Article] Hot workabillity of as-cast high manganese-high carbon steel In: Steel research international, 78 (7), 536-545, 2007	Bleck, Wolfgang Phiu-On, K. Heering, Christoph Hirt, Gerhard
[Journal Article] Ermittlung von Umformgrenzen beim Freiformschmieden In: Materialwissenschaft und Werkstofftechnik = Materials science and engineering technology, 38 (4), 274-278, 2007 [DOI: 10.1002/mawe.200700130]	Schneider, Verena Hirt, Gerhard Brethfeld, A. Lehmann, G. Diener, U.
[Journal Article] Modelling of incremental bulk and sheet metal forming In: Steel research international, 78 (10/11), 751-755, 2007	Bambach, Markus Barton, Gabriel Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] A new incremental sheet forming process based on a flexible supporting die system In: Key engineering materials, 344, 607-614, 2007	Maidagan, E. Zettler, E. Bambach, Markus Rodríguez, P. Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Analysis of size-effects in the miniaturized deep drawing process In: Key engineering materials, 344, 791-798, 2007 [DOI: 10.4028/www.scientific.net/KEM.344.791]	Justinger, Holger Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Implementing and high accuracy multimesh method for incremental bulk metal forming In: CIRP annals : manufacturing technology, 2007, 313-316, 2007 [DOI: 10.1016/j.cirp.2007.05.072]	Kopp, Reiner Hirt, Gerhard Hofmann, Oliver Franzke, Martin Barton, Gabriel
[Journal Article] Einsatz der Schallemissionsanalyse bei der Ermittlung von Umformgrenzen beim Freiformschmieden In: Schmiede-Journal, 2007 (9), 16-18, 2007	Hirt, Gerhard Schneider, Verena
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Economical and ecological benefits of process-integrated surface structuring In: Key engineering materials, 344, 939-946, 2007	Thome, Mario Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Experimental and numerical analysis of forming limits in CNC incremental sheet forming In: Key engineering materials, 344, 511-518, 2007 [DOI: 10.4028/www.scientific.net/KEM.344.511]	Bambach, Markus Hirt, Gerhard Todorova, M.
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Thixoforming of steels : a status report In: Materials science forum, 539/543 (5), 4297-4302, 2007 [DOI: 10.4028/www.scientific.net/MSF.539-543.4297]	Bleck, Wolfgang Hirt, Gerhard Püttgen, Wolfgang
[Contribution to a book, Contribution to a conference proceedings] Investigation of Flow Behaviour and Microstructure on X210CrW12 Steel in Semi-Solid State In: Semi-solid processing of alloys and composites : proceedings of the 9th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2006, September 11-13, 2006, Busan, Korea / organised by Pusan National University ... Ed. by C. G. Kang ..., 189-192, 2006 [DOI: 10.4028/www.scientific.net/SSP.116-117.189]	Shimahara, Hideki Baadjou, René Kopp, Reiner Hirt, Gerhard
[Journal Article] Semi-solid casting and forging of steel In: Die casting engineer, 50 (6), 32-38, 2006	Bührig-Polaczek, Andreas Hirt, Gerhard Afrath, Carsten Püttgen, Wolfgang Bleck, Wolfgang et al.
[Contribution to a conference proceedings] Finite-elemente modelling of multi-pass forging accelerated by a multi-mesh-method In: Workshop on Incremental Forming, 18. Mai 2006 / PTU Darmstadt, 2006	Hirt, Gerhard Barton, Gabriel Franzke, Martin
[Contribution to a book, Contribution to a conference proceedings] Application of LS-Dyna in metal forming research In: Conference proceedings / 24th CADFEM Users' Meeting 2006 - International Congress on FEM Technology with 2006 German ANSYS Conference : [October 25 - 27, 2006, Schwabenlandhalle Stuttgart, Stuttgart/Fellbach, Germany] / [CADFEM, Gesellschaft für Computeruntersützte Konstruktion und Berechnung], 2006	Hirt, Gerhard Meyer, Alexander Urban, Marcus van Santen, Johan Surya Atmadja, Heru Eka et al.
[Journal Article] Thixo-forging and thixo-joining of an integrated product In: Steel research international, 77 (5), 349-354, 2006	Wang, Kai Kun Kopp, Reiner Hirt, Gerhard
[Journal Article] Air bending process for load optimised profiles In: Steel research international, 77 (9/10), 754-759, 2006	Abratis, Cornel Hirt, Gerhard Kopp, Reiner
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Investigation on fracture mechanism of A356 during thixo-forging In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 116/117, 140-144, 2006 [DOI: 10.4028/www.scientific.net/SSP.116-117.140]	Wang, Kai Kun Kopp, Reiner Hirt, Gerhard
[Contribution to a conference proceedings] Finite-elemente modeling of multi-pass forging accelerated by a multi-mesh-method In: PtU Workshop Presentations 17./18. Mai 2006, 2006	Barton, G. Hirt, Gerhard Franzke, Martin
[Contribution to a book, Contribution to a conference proceedings] Der Zukunft Form geben In: Berichtsband zum 21. Aachener Stahlkolloquium Metallurgie : 14. und 15. September 2006, Eurogress Aachen / [Dieter G. Senk (Hrsg.)]. Institut für Eisenhüttenkunde; Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 301-312, 2006	Hirt, Gerhard Hofmann, Oliver
[Contribution to a conference proceedings] Design of an improved blank holder drive system to enable combined stretch forming and CNC-incremental sheet forming In: IX. National Conference on Sheet Metal Forming 18./19. Oktober 2006, 2006	Hirt, Gerhard Ames, Jochen Peter Ziegler, Simon
[Contribution to a book, Contribution to a conference proceedings] Microstructure evolution and tool-workpiece interactions in forming simulation In: 2nd International Conference on Accuracy in Forming Technology : ICAFT 2006 und 13. Sächsische Fachtagung Umformtechnik, SFU 2006. Proceedings : 13.-15. November 2006 Stadthalle Chemnitz / [Hrsg. Reimund Neugebauer]. - Berichte aus dem IWU ; 36, 337-346, 2006	Hirt, Gerhard Bambach, Markus Franzke, Martin Li, Xiaoli
[Contribution to a conference proceedings] Selected successful achievements by the european members of the open die forging committee within the steel institute VDEh In: IFM 2006 : 16th International Forgemasters Meeting ; 15 - 19 October 2006, Cutlers' Hall, Sheffield, UK ; [conference papers] / [organised by IOM Communications Ltd on behalf of the Institute of Materials, Minerals and Mining], 33-46, 2006	Rech, Ralf Bender, W. Bokelmann, D. Golz, J. von Hehl, A. et al.
[Contribution to a conference proceedings] New potential in the field of the ring rolling research In: IFM 2006 : 16th International Forgemasters Meeting ; 15 - 19 October 2006, Cutlers' Hall, Sheffield, UK ; [conference papers] / [organised by IOM Communications Ltd on behalf of the Institute of Materials, Minerals and Mining], 353-361, 2006	Michl, Dennis Koppers, U. Hirt, Gerhard Tiedemann, I.
[Contribution to a conference proceedings] Finite-elemente modelling of radial forging of nickel-base alloys with all multi-mesh-method In: IFM 2006 : 16th International Forgemasters Meeting ; 15 - 19 October 2006, Cutlers' Hall, Sheffield, UK ; [conference papers] / [organised by IOM Communications Ltd on behalf of the Institute of Materials, Minerals and Mining], 581-590, 2006	Barton, Gabriel Li, Xiaoli Schneider, Verena Franzke, Martin Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Automated semi-solid forging of steel components by means of thixojoining In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 116-117, 383-386, 2006 [DOI: 10.4028/www.scientific.net/SSP.116-117.383]	Baadjou, René Shimahara, H. Hirt, Gerhard
[Journal Article] Twin-roll casting of strip with tailored thickness variation In: Production engineering, 13 (2), 91-94, 2006	Gräf, Gerhard Hirt, Gerhard Klos, W. Obieglo, A.
[Journal Article] Besser simulieren In: Mikroproduktion, 2006 (1), 38-39, 2006	Hirt, Gerhard van Putten, Koos Thome, Mario
[Journal Article] Investigation on forming defects during thixo-forging of aluminum alloy ALSi7Mg In: Advanced engineering materials, 8 (8), 724-730, 2006 [DOI: 10.1002/adem.200500210]	Wang, Kaimkun Kopp, Reiner Hirt, Gerhard
[Journal Article] Validation of FEA for asymmetic incremental sheet forming by on-line measurements of deformation and tool forces In: Production engineering, 13 (1), 39-44, 2006	Hirt, Gerhard Ames, Jochen Peter Bambach, Markus
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Rheoforging of steel In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 116-117, 464-467, 2006 [DOI: 10.4028/www.scientific.net/SSP.116-117.464]	Knauf, Frederik Hirt, Gerhard Seidl, I.
[Journal Article] Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks In: Journal of materials processing technology, 177 (1/3), 360-363, 2006 [DOI: 10.1016/j.jmatprotec.2006.03.195]	Urban, Marcus Krahn, M. Hirt, Gerhard Kopp, Reiner
[Contribution to a book, Contribution to a conference proceedings] Open-die forging with the assist of a robot-concepts and prospects of using the robot Technology in forging plants In: ESAFORM 2006 : Glasgow, United Kingdom April 26 - 28, 2006 / The 9th International Conference on Material Forming. Ed. by Neal Juster ..., 431-434, 2006	Ziegelmayer, Oliver Kopp, Reiner Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings] Thermo-physical properties and boundary conditions for the semi-solid forging of steels and their applications by means of FEM In: ESAFORM 2006 : Glasgow, United Kingdom April 26 - 28, 2006 / The 9th International Conference on Material Forming. Ed. by Neal Juster ..., 811-814, 2006	Shimaraha, H. Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Semi solid casting and forging of steel In: Diffusion and defect data - solid state data : Pt. B. Solid state phenomena, 116-117, 34-43, 2006	Hirt, Gerhard Bleck, Wolfgang Bührig-Polaczek, Andreas Shimahara, Hideki Püttgen, Wolfgang et al.
[Contribution to a book, Contribution to a conference proceedings] Initial experimental and numerical investigations into a class of new strategies for single point incremental sheet forming (SPIF) In: Proceedings of the 8th ESAFORM Conference on Material Forming, 'ESAFORM 2005', 27th - 29th April 2005, Cluj-Napoca, Romania / Organised by: Research Centre in Sheet Metal Forming CERTETA, Cluj-Napoca, Romania. [Ed.: Dorel Banabic]. - Vol. 2, 671-674, 2005	Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article] Asymmetric single point incremental forming of sheet metal In: CIRP annals : manufacturing technology, 2005, 88-114, 2005 [DOI: 10.1016/S0007-8506(07)60021-3]	Jeswiet, J. Micari, F. Hirt, Gerhard Bramley, A. Duflou, J. et al.
[Contribution to a conference proceedings] Modelling and simulation of incremental changes in plasticity using multi-mesh-methods In: Building bridges in metallurgy : NIMR Conference 2005 ; Noordwijkerhout, Dec. 12-13, 2005 / NIMR, Netherlands Institute for Metals Research, 2005	Hirt, Gerhard Franzke, Martin Hofmann, Oliver
[Contribution to a conference proceedings] Kleinserienfertigung durch inkrementelle Blechumformung : Verfahrensgrenzen und Wirtschaftlichkeit In: 26. Fachtagung 'Prozesskette Karosserie', 29. Juni 2005, 2005	Hirt, Gerhard Ames, Jochen Peter Bambach, Markus
[Contribution to a conference proceedings] Virtual Reality und Simulation für umformtechnische Prozesse In: Freiberger Forschungsforum / 56. Berg- und Hüttenmännischer Tag, 15. bis 17. Juni 2005. Technische Universität Bergakademie Freiberg, Institut für Wärmetechnik und Thermodynamik, 2005	Hofmann, Oliver Hirt, Gerhard Kuhlen, Torsten Plociennik, C.
[Contribution to a conference proceedings] Komplexe Ringquerschnitte flexibel gewalzt : Modellversuche und Modellierung In: FInU : 3. Fachtagung Inkrementelle Umformtechnik ; Darmstadt, 23./24. November 2005 PtU Darmstadt; Technische Universität Darmstadt ; IBF, RWTH Aachen, Rheinisch-Westfälische Technische Hochschule Aachen ..., 2005	Hirt, Gerhard Hofmann, Oliver Michl, Dennis Tiedemann, I.
[Contribution to a conference proceedings] Manufacturing and processing of tailored products In: IX Conferencia Int. de Forjamento (XXV SENAFOR) and VIII. National Conference on Sheet Metal Forming, 6./7. Oktober 2005, 2005	Hirt, Gerhard Abratis, Cornel Ames, Jochen Peter Jackel, Frank Martin Meyer, Alexander
[Abstract, Contribution to a book, Contribution to a conference proceedings] Strip profile rolling - a new production process for tailor rolled strips In: Advanced technology of plasticity 2005 : proceedings of the 8th International Conference on Technology of Plasticity, Verona, October 9 - 13, 2005 ; [extended abstracts] / ed. by P. F. Bariani, 493-494, 2005	Kopp, Reiner Hirt, Gerhard Jackel, Frank Martin
[Contribution to a book, Contribution to a conference proceedings] Measurement technology in metal forming - results of the multi laboratory experiments In: Prozessskalierung : Tagungsband des 2. Kolloquiums Prozessskalierung im Rahmen des DFG Schwerpunktprogramms Prozessskalierung ; Bremen, 9.-10. November 2005 / F. Vollertsen (Hrsg.), 309-320, 2005	Hirt, Gerhard Gahlert, C. Herzig, N. Meyer, L. W. van Putten, Koos
[Contribution to a book, Contribution to a conference proceedings] Ermittlung der Formänderungsgrenzen für das Freiformschmieden von hochlegierten Stählen In: Neue Entwicklungen beim Gesenk- und Freiformschmieden : MEFORM 2005 ; 30. März bis 01. April 2005 ; Tagungsband / Acatrain e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg; TU Bergakademie Freiberg, Institut für Metallformung. [Red.: G. Lehmann], 276-287, 2005	Schneider, Verena Kopp, Reiner Hirt, Gerhard Ziegelmeyer, O.
[Contribution to a book, Contribution to a conference proceedings] Initial experimental and numerical investigations into all class of new strategies for single point incremental sheet forming (SPIF) In: Proceedings of the 8th ESAFORM Conference on Material Forming, 'ESAFORM 2005', 27th - 29th April 2005, Cluj-Napoca, Romania / Organised by: Research Centre in Sheet Metal Forming CERTETA, Cluj-Napoca, Romania. [Ed.: Dorel Banabic]. - Vol. 2, 671-674, 2005 [DOI: 10.1007/s12289-009-0426-8]	Bambach, Markus Hirt, Gerhard Ames, Jochen Peter Azaouzi, M. Batoz, J. L. et al.
[Contribution to a book, Contribution to a conference proceedings] Scale effects in the rolling of micro strip In: Prozessskalierung : Tagungsband des 2. Kolloquiums Prozessskalierung im Rahmen des DFG Schwerpunktprogramms Prozessskalierung ; Bremen, 9.-10. November 2005 / F. Vollertsen (Hrsg.), 41-50, 2005	Hirt, Gerhard Kopp, Reiner van Putten, Koos
[Abstract, Contribution to a book, Contribution to a conference proceedings] Analysis of cup geometry and temperature conditions in the miniturized deep drawing process In: Advanced technology of plasticity 2005 : proceedings of the 8th International Conference on Technology of Plasticity, Verona, October 9 - 13, 2005 ; [extended abstracts] / ed. by P. F. Bariani, 459-460, 2005	Justinger, H. Hirt, Gerhard Witulski, N.
[Contribution to a book, Contribution to a conference proceedings] Performance assessment of element formulations and constitutive laws In: Computational plasticity : fundamentals and applications ; proceedings of the Eighth International Conference on Computational Plasticity held in Barcelona, Spain, 5th - 7th September 2005 / ed. by D. R. J. Owen ..., 4 S., 2005	Bambach, Markus Hirt, Gerhard
[Abstract, Contribution to a book, Contribution to a conference proceedings] Modelling incremtal forming using a meshless surface representation based radial basis functios In: Advanced technology of plasticity 2005 : proceedings of the 8th International Conference on Technology of Plasticity, Verona, October 9 - 13, 2005 ; [extended abstracts] / ed. by P. F. Bariani, 261-262, 2005	Hirt, Gerhard Bambach, Markus
[Contribution to a book, Contribution to a conference proceedings] Quantitative Validation of FEM Simulations for Incremental Sheet Forming Using Optical Deformation Measurement In: Sheet metal 2005 : proceedings of the 11th International Conference, held at the Friedrich-Alexander University Erlangen-Nuremberg, Germany, 05 - 08 April 2005 / [SheMet '05]. Ed. by M. Geiger ..., 509-511, 2005 [DOI: 10.4028/www.scientific.net/AMR.6-8.509]	Bambach, Markus Hirt, Gerhard Ames, Jochen Peter
[Journal Article] Schnell und günstig zum Einzelstück In: Blech : Fachzeitschr. für d. ges. Blech- u. Kaltbandverarbeitung, 52 (1), 42-42, 2005	Hirt, Gerhard Ames, Jochen Peter
[Journal Article] Experiences in the micro forming of copper and copper alloys In: Metall, 59 (11), 706-709, 2005	Hirt, Gerhard Justinger, Holger Thome, Mario van Putten, Koos
[Journal Article] Manufacturing of sheet metal parts from tailor rolled blanks In: Journal for technology of plasticity : JTP, 30 (1/2), 12 S., 2005	Hirt, Gerhard Abratis, Cornel Ames, Jochen Peter Meyer, Alexander
[Contribution to a book, Contribution to a conference proceedings] Metal flow and die filling in coining of micro structures with and without flash In: Sheet metal 2005 : proceedings of the 11th International Conference, held at the Friedrich-Alexander University Erlangen-Nuremberg, Germany, 05 - 08 April 2005 / [SheMet '05]. Ed. by M. Geiger ..., 631-638, 2005 [DOI: 10.4028/www.scientific.net/AMR.6-8.631]	Thome, Mario Hirt, Gerhard Rattay, B.
[Journal Article] A new forming strategy to realise parts designed for deep-drawing In: Steel research international, 76 (2/3), 160-166, 2005	Hirt, Gerhard Ames, Jochen Peter Bambach, Markus
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Semi-solid forging of 100Cr6 and X210CrW12 steel In: CIRP annals : manufacturing technology, 54 (1), 257-260, 2005 [DOI: 10.1016/S0007-8506(07)60097-3]	Kopp, Reiner Hirt, Gerhard Shimahara, Hideki Seidl, Ingold Küthe, Fabian et al.
[Contribution to a book, Contribution to a conference proceedings] Validation of FEM-simulation for micro deep drawing process modeling (N281) In: Materials processing and design : modeling, simulation and applications ; NUMIFORM 2004 ; proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, Columbus, Ohio, 13 - 17 June 2004 / ed. Somnath Ghosh .... - Pt. 1, 952-957, 2004 [DOI: 10.1063/1.1766650]	Witulski, Norbert Hirt, Gerhard Justinger, Holger
[Contribution to a conference proceedings] New lectures on sustainable manufacturing : a chance for collaborative ICEM activity In: The 10th International Workshop on Ecology and Economy in Material and Products Manufacturing (ICEM 2004) / Int. Committee on Environment and Manufacturing, 26.-29. Oktober 2004, Shanghai, 2004	Hirt, Gerhard Kopp, Reiner
[Journal Article] Experimental and numerical investigation of miniaturization in deep drawing In: Steel grips, 2, 693-698, 2004	Hirt, Gerhard Justinger, Holger Witulski, Norbert
[Journal Article] Forming strategies and process modelling for CNC incremental sheet forming In: CIRP annals : manufacturing technology, 53 (1), 203-206, 2004 [DOI: 10.1016/S0007-8506(07)60679-9]	Hirt, Gerhard Ames, Jochen Peter Bambach, Markus Kopp, Reiner
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Asymmetric single point incremental forming of sheet metal In: CIRP annals : manufacturing technology, 53 (2004,2), 623-649, 2004	Jeswiet, J. Micari, F. Hirt, Gerhard Bramley, A. Duflou, J. et al.
[Journal Article] Vertical continuous rheocasting of aluminium alloys In: Metall, 49 (12), 808-813, 1995	Zillgen, M. Hirt, Gerhard Engler, Siegfried
[Contribution to a conference proceedings, Journal Article] Near net shape forming of particulate-reinforced al-alloys by isothermal forming compared to semisolid forming In: Journal of materials processing technology, 45 (1/4), 415-420, 1994 [DOI: 10.1016/0924-0136(94)90375-1]	Witulski, T. Heussen, J. M. M. Winkelmann, A. Hirt, Gerhard Kopp, Reiner
[Contribution to a conference proceedings] Möglichkeiten zur Produktivitätssteigerung, Qualitätsverbesserung und Materialeinsparung durch endabmessungsnahe Fertigung mit kombinierten Ur-/Umformverfahren In: Int. GIFA-Kongr. 'Gießereitech. 94'. Düsseldorf 1994, Sess. III/15, 134-141, 1994	Hirt, Gerhard Sahm, P. R. Kopp, R.
[Contribution to a conference proceedings] Near net shape forming of pariculate inforced Al-alloys by isothermal forming compared to semi solid forming In: 5. Int. Conf. of Met. Form. Birmingham, Großbritannien 1994, 1994	Witulski, T. Heussen, J. M. M. Winkelmann, A. Hirt, Gerhard Kopp, R.
[Journal Article] Formgebung im teilerstarrten Zustand In: RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen, 1994 (2), 1994	Kopp, Reiner Mertens, Hans-Peter Breuer, T. Hirt, Gerhard
[Contribution to a conference proceedings] Preliminary results in thixoforging aluminium wrought alloys In: Proc. 2. Int. Conf. on the Process. of Semi-Sol. Alloys and Composites. Cambridge, Mass. (USA) 1992, 1992	Tietmann, A. Bremer, T. Hirt, Gerhard Kopp, R.
[Contribution to a conference proceedings] Formgebung im teilerstarrten Zustand: Gießschmieden - Thixoschmieden In: 7. Aachener Stahlkolloq. 1992, Tag.bd. Kap. 6.5, 1992	Tietmann, A. Kopp, R. Bremer, T. Hirt, Gerhard
[Journal Article] Simulation des Zwei-Walzen-Gießwalzprozesses In: Stahl und Eisen, 109 (6), 53-56, 1989	Beyer, H. Hirt, Gerhard Helmrath, C. Kopp, R. Simon, R.
[Journal Article] Metal flow in compression of tubular parts: Predictions made with different computer programs and effect of flow stress data In: Steel research, 60, 201-207, 1989	Hirt, Gerhard Altan, T.
[Journal Article] Investigation of die stresses and die deflections in forging axisymmetric parts In: Steel research, 60 (6), 255-262, 1989	Hirt, Gerhard Altan, T.
[Dissertation / PhD Thesis] Beitrag zur Auslegung und Simulation von Giesswalzprozessen - In: Umformtechnische Schriften 16, 1988	Hirt, Gerhard

h1

h2

h3

h4

h5

h6

Institute of Metal Forming

Faculties and Institutions

RWTH

Faculties and Institutes

Find Institute:

Institutions

Navigation

Sub-Navigation

Person

Address

Contact

Publications

Footer

RWTH

Services

Other Resources

Institutions

h1

h2

h3

h4

h5

h6

You Are Here:

Person

Address

Contact

Publications

Footer

RWTH

Services

Other Resources

Institutions