Person

Dr.-Ing.

Marco Teller

Senior Engineer - Materials Testing, Materials Modelling

Institute of Metal Forming

Address

Room: 105

Intzestraße 10

52072 Aachen

Contact

WorkPhone
Phone: +49 241 80 95910
Fax Fax: +49 241 80 92234
 

Publications

Source Author(s)
[Journal Article]
Modeling and exploiting the strip tension influence on surface imprinting during temper rolling of cold-rolled steel
In: Advances in industrial and manufacturing engineering, 3, 100045, 2021
[DOI: 10.1016/j.aime.2021.100045]
Li, Xinyang (Corresponding author)
Schulte, Christopher
Abel, Dirk
Teller, Marco
Hirt, Gerhard
et al.
[Journal Article]
Voruntersuchungen zur Einsetzbarkeit des Walzprofilierens zur Herstellung bistabiler dünner Bleche
In: Forschung im Ingenieurwesen, 2021
[DOI: 10.1007/s10010-021-00488-5]
Pavliuchenko, Pavlo (Corresponding author)
Teller, Marco
Hirt, Gerhard
[Journal Article]
Korngrößenvorhersage beim Freiformschmieden von Inconel 718 mit DIGIMU®
In: massivUMFORMUNG, 2021 (3), 50-54, 2021
Brüggemann, Holger (Corresponding author)
Quadfasel, Angela
Nietsch, Jürgen Andreas
Teller, Marco
de Micheli, Pascal
et al.
[Contribution to a conference proceedings]
Characterizing and simulating multi-pass hot roll bonding
In: Materials Data for smart forming technologies : MEFORM 2021 : 18.03.2021, Institut für Metallformung Freiberg, Virtuelle Konferenz / Institut für Metallformung, TU Bergakademie Freiberg, 77-80, 2021
Krämer, Alexander Maximilian (Corresponding author)
Liu, Zhao
Teller, Marco
Hirt, Gerhard
[Journal Article]
Analysis and manufacturing of bistable metallic profiles
In: Archive of applied mechanics, 2021
[DOI: 10.1007/s00419-021-01916-2]
Pavliuchenko, Pavlo (Corresponding author)
Hirt, Gerhard
Teller, Marco
[Contribution to a conference proceedings]
Economical production of conically shaped concentrated windings using forming technology for use in wheel hub engines
In: [10th International Electric Drives Production Conference, EDPC, 2020-12-08 - 2020-12-09, Online Conference], 188-195, 2020
Petrell, Daniel (Corresponding author)
Teller, Marco
Hirt, Gerhard
Börzel, Stefan
Schäfer, Waldemar
[Journal Article]
Lubricant-free tribology concepts for cold extrusion by interaction-reduced surfaces
In: Dry metal forming open access journal : DMFOAJ, 6, 166-191, 2020
Teller, Marco (Corresponding author)
Prünte, Stephan
Ross, Ingo
Küpper, Moritz Emanuel
Poprawe, Reinhart
et al.
[Contribution to a conference proceedings, Journal Article]
Model framework for the simulation of microstructure and yield stress during aging of industrial Al-Mg-Si aluminum alloys
In: Procedia manufacturing, 50, 368-375, 2020
[DOI: 10.1016/j.promfg.2020.08.068]
Wagner, Fabrice (Corresponding author)
Bollmann, Christian
Brüggemann, Thiemo
Hojda, Stephan
Teller, Marco
et al.
[Contribution to a book, Contribution to a conference proceedings]
Manufacturing of Conically Shaped Concentrated Windings for Wheel Hub Engines by a Multi-Stage Upsetting Process
In: 2019 9th International Electric Drives Production Conference (E|DPC) : 3 and 4 December 2019, Esslingen, Germany : proceedings / E|DPC-2019 - Electric Drives Production Conference 2019 ; sponsored by: IEEE, FAU - Friedrich Alexander Universität Erlangen-Nürnberg, IAS - IEEE Industry Applications Society, PELS - IEEE Power Electronics Society, 9011944, 7 Seiten, 2019
[DOI: 10.1109/EDPC48408.2019.9011944]
Petrell, Daniel (Corresponding author)
Teller, Marco (Corresponding author)
Hirt, Gerhard (Corresponding author)
Borzel, Stefan (Corresponding author)
Schafer, Waldemar (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings]
Parametrization of bi-parametric friction models through inverse modelling of conical tube-upsetting tests
In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere]. - B, 120002, 2019
[DOI: 10.1063/1.5112657]
Henze, Michel (Corresponding author)
Teller, Marco
Hirt, Gerhard
[Book, Dissertation / PhD Thesis]
Tribologische Prüfkette zur Analyse trockener Umformprozesse am Beispiel des Vollvorwärtsfließpressens von Aluminium
In: Umformtechnische Schriften 194, 2019
Teller, Marco
[Contribution to a book]
Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 43-53, 2019
[DOI: 10.18154/RWTH-2020-02907]
Quadfasel, Angela (Corresponding author)
Teller, Marco
Madivala Venkateshappa, Manjunatha
Haase, Christian
Roters, Franz
et al.
[Contribution to a book, Contribution to a conference proceedings]
Characterizing multi-pass conditions for roll bonding of aluminum alloys
In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere]. - A, 050014, 2019
[DOI: 10.1063/1.5112578]
Krämer, Alexander Maximilian (Corresponding author)
Liu, Zhao
Karhausen, Kai
Aretz, Holger
Teller, Marco
et al.
[Contribution to a book, Contribution to a conference proceedings]
Thermal characterization of metallic surface contacts : New test rig for determination of the interfacial heat transfer coefficient at intermediate temperatures
In: Production at the leading edge of technology : Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens Editors, 2019
[DOI: 10.1007/978-3-662-60417-5_21]
Nietsch, Jürgen (Corresponding author)
Menzler, Jan
Hojda, Stephan
Lenz, Wolfgang
Teller, Marco
et al.
[Contribution to a conference proceedings]
Sensitivity Analysis regarding the Inverse Modelling of Conical Tube-Upsetting Tests
In: [39th SENAFOR, 2019-10-02 - 2019-10-04, Porto Alegre, Brasilien], 2019
Henze, Michel (Corresponding author)
Teller, Marco
Hirt, Gerhard
[Contribution to a conference proceedings]
Computer-Aided Strain Hardening Engineering for Crash Boxes of High Manganese Steels
In: The 4th International Conference on Medium and High Manganese Steels ; April 1-3, 2019, Aachen, Germany : 4th HMnS / IEHK, RWTH Aachen University ; proceedings: Wolfgang Bleck, Dierk Raabe ; editing: Sonja Brühl, 295-298, 2019
Quadfasel, Angela (Corresponding author)
Teller, Marco
Haase, Christian
Hirt, Gerhard
[Contribution to a book, Journal Article]
Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels
In: Metals : open access journal, 9 (7), 772, 2019
[DOI: 10.3390/met9070772]
Quadfasel, Angela (Corresponding author)
Teller, Marco
Madivala Venkateshappa, Manjunatha
Haase, Christian
Roters, Franz
et al.
[Journal Article]
Parametrisierung moderner Reibmodelle
In: Umformtechnik, 4, 22-23, 2019
Henze, Michel (Corresponding author)
Hirt, Gerhard
Teller, Marco
[Contribution to a book, Contribution to a conference proceedings]
Computergestütztes "Strain Hardening Engineering" für Crashboxen aus hoch Mangan Stahl
In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 265-274, 2019
Quadfasel, Angela (Corresponding author)
Teller, Marco
Hirt, Gerhard
Haase, Christian
[Contribution to a book, Journal Article]
Production of bistable fully closed metallic shells by introducing residual stresses during bending processes
In: Production engineering, 13 (2), 201-209, 2019
[DOI: 10.1007/s11740-019-00875-6]
Pavliuchenko, Pavlo (Corresponding author)
Teller, Marco
Grüber, Markus
Bremen, Thomas
Hirt, Gerhard
[Contribution to a book, Journal Article]
A Semianalytical Model for the Determination of Bistability and Curvature of Metallic Cylindrical Shells
In: Journal of manufacturing and materials processing, 3 (1), 22, 2019
[DOI: 10.3390/jmmp3010022]
Pavliuchenko, Pavlo (Corresponding author)
Teller, Marco
Grüber, Markus
Hirt, Gerhard
[Contribution to a conference proceedings]
Investigation of texture evolution during rolling process of non-oriented Si based electrical steels with 2D and 3D RVEs
In: [6th European Conference on Computational Mechanics (ECCM 6), 7thEuropean Conference on Computational Fluid Dynamics (ECFD 7), 2018-06-11 - 2018-06-15, Glasgow, Scotland], 1428-1438, 2018
Vuppala, Aditya (Corresponding author)
Wei, Xuefei
Hojda, Stephan
Teller, Marco
Hirt, Gerhard
[Journal Article]
Comprehensive procedure for the design of rolling schedules for roll bonding
In: International aluminium journal, 94, 57-59, 2018
Liu, Zhao (Corresponding author)
Krämer, Alexander Maximilian
Karhausen, Kai Friedrich
Aretz, Holger
Teller, Marco
et al.
[Contribution to a book, Contribution to a conference proceedings]
Modellierung von Produkteigenschaften beim Walzen : Zielgrößengerechte Modellauswahl für Mikrostruktur, Textur und Oberfläche
In: Metallurgie im Wandel 4.0 : 32. Aachener Stahlkolloquium, 13.-14. September 2018, Tivoli Aachen, Tagungsband / Dieter Senk (Hrsg.) ; Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, Rheinisch-Westfälische Technische Hochschule Aachen, 262-272, 2018
Hirt, Gerhard (Corresponding author)
Hojda, Stephan
Krämer, Alexander Maximilian
Teller, Marco
Wei, Xuefei
[Contribution to a book, Contribution to a conference proceedings]
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
In: 5th International Conference on New Forming Technology (ICNFT 2018) : Bremen, Germany, September 18-21, 2018 / F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan (eds.), 14010, [1]-7, 2018
[DOI: 10.1051/matecconf/201819014010]
Teller, Marco (Corresponding author)
Roß, Ingo
Prünte, Stephan
Temmler, André
Küpper, Moritz Emanuel
et al.
[Contribution to a book, Journal Article]
Investigation of Friction Conditions in Dry Metal Forming of Aluminum by Extended Conical Tube-Upsetting Test
In: Key engineering materials, 767, 189-195, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.189]
Teller, Marco (Corresponding author)
Ross, Ingo
Temmler, André
Poprawe, Reinhart
Prünte, Stephan
et al.
[Contribution to a book, Contribution to a conference proceedings]
Laser Polishing of Cold Work Steel AISI D2 for Dry Metal Forming Tools : Surface Homogenization, Refinement and Preparation for Self-Assembled Monolayers
In: Tribology in manufacturing processes and joining by plastic deformation II : 8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation (ICTMP2018) : selected, peer reviewed from the 8th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, June 24-26, 2018, Elsinore, Denmark / edited by Niels Bay and Chris V. Nielsen, 69-76, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.69]
Roß, Ingo (Corresponding author)
Temmler, André
Küpper, Moritz Emanuel
Prünte, Stephan
Teller, Marco
et al.
[Contribution to a book, Journal Article]
A New Coupled Thermal Stress FE-Model for Investigating the Influence of Non-Isothermal Conditions on Bond Strength and Bonding Status of the First Pass in Roll Bonding
In: Key engineering materials, 767, 301-308, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.301]
Liu, Zhao (Corresponding author)
Krämer, Alexander Maximilian
Karhausen, Kai Friedrich
Aretz, Holger
Teller, Marco
et al.
[Journal Article]
Einfluss des Handpolierens von Probenkörpern auf Gestaltabweichungen erster Ordnung und das Verschleißverhalten in Tribometerversuchen
In: Dry metal forming open access journal, 4, 31-34, 2018
Teller, Marco (Corresponding author)
Hirt, Gerhard
Roß, Ingo
Küpper, Moritz
Temmler, André
et al.
[Contribution to a conference proceedings]
Remeshing framework for a multiphysics FEM solver exemplified by a damage sensitive extrusion process
In: [37th Senafor, 2017-10-04 - 2017-10-06, Porto Alegre, Brazil], 2017
Hojda, Stephan (Corresponding author)
Sturm, Karl J. X.
Teller, Marco
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
Tribological investigations of the applicability of surface functionalization for dry extrusion processes
In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 140001, 1-6, 2017
[DOI: 10.1063/1.5008157]
Teller, Marco (Corresponding author)
Prünte, Stephan
Ross, Ingo
Temmler, André
Schneider, Jochen M.
et al.
[Journal Article]
How dry is dry? A critical analysis of surface conditions used in dry metal forming
In: Dry metal forming open access journal, 3, 90-94, 2017
Almohallami, Amer
Arghavani, Mostafa
Böhmermann, F.
Freiße, H.
Herrmann, M.
et al.
[Journal Article]
Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium
In: Dry metal forming open access journal, 3, 073-080, 2017
Teller, Marco (Corresponding author)
Hirt, Gerhard
Roß, Ingo
Temmler, André
Poprawe, Reinhart
et al.
[Journal Article]
Decreasing friction during Al cold forming using a nanomolecular layer
In: Journal of vacuum science & technology : JVST / A, Vacuum, surfaces, and films, 35 (2), 020605, 2017
[DOI: 10.1116/1.4972515]
Prünte, Stephan (Corresponding author)
Music, Denis
Schneider, Jochen M.
Teller, Marco
Hirt, Gerhard
et al.
[Journal Article]
Abschätzung der umformtechnischen Grenzen des schmierstofffreien Kaltfließpressens von Aluminium anhand von Tribometerversuchen
In: Dry metal forming open access journal, 2, 56-61, 2016
[DOI: 10.18154/RWTH-2017-01822]
Teller, Marco (Corresponding author)
Hirt, Gerhard
Roß, Ingo
Poprawe, Reinhart
Prünte, Stephan
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Extended Conical Tube-Upsetting Test to Investigate the Evolution of Friction Conditions
In: Key engineering materials, 716, 157-164, 2016
[DOI: 10.4028/www.scientific.net/KEM.716.157]
Teller, Marco (Corresponding author)
Klubakov, Alexej
Franzke, Martin
Lohmar, Johannes
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
Prozessnahe Charakterisierung von innovativen Oberflächen für das Trockenumformen
In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 345-354, 2016
Teller, Marco (Corresponding author)
Roeder, Roman
Hirt, Gerhard
[Contribution to a conference proceedings]
Investigation of the influence of laser surface modifications on the adhesive wear behavior in dry cold extrusion of aluminium
In: Lasers in manufacturing 2015 : LiM 2015 ; proceedings ; June 22 - 25, 2015, Munich ICM, Internationales Congress Center München, Germany ; [part of the] World of Photonics Congress / organizer WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., The German Scientific Laser Society ... General chair: Thomas Graf, 10 S., 2015
Roß, Ingo (Corresponding author)
Temmler, André
Willenborg, Edgar
Poprawe, Reinhart
Teller, Marco
[Journal Article]
Untersuchung zur Oberflächenmodifikation mittels Laserpolieren für das schmiermittelfreie Kaltfließpressen von Aluminium
In: Dry metal forming open access journal, 1, 143-151, 2015
Roß, Ingo (Corresponding author)
Temmler, André
Poprawe, Reinhart
Teller, Marco
Hirt, Gerhard
et al.
[Journal Article]
Methodik zur Entwicklung von interaktionsminimierten Oberflächenschichten für das schmiermittelfreie Kaltfließpressen von Aluminium
In: Dry metal forming open access journal, 1, 34-41, 2015
Teller, Marco (Corresponding author)
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.
[Journal Article]
Trockene Tribosysteme prozessnah beschreiben
In: Maschinenmarkt : MM, 45, 36-41, 2015
Teller, Marco (Corresponding author)
Hirt, Gerhard
[Journal Article]
A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium
In: CIRP annals, manufacturing technology, 64/1, 289-292, 2015
[DOI: 10.1016/j.cirp.2015.04.086]
Teller, Marco (Corresponding author)
Bambach, Markus
Hirt, Gerhard (Corresponding author)
[Journal Article]
Investigation of the suitability of surface treatments for dry cold extrusion by process-oriented tribological testing
In: Key engineering materials, 651/653, 473-479, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.473]
Teller, Marco (Corresponding author)
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.
[Contribution to a conference proceedings, Journal Article]
A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation
In: Conference Papers in Science, 2015, 496515, 2014
[DOI: 10.1155/2015/496515]
Teller, Marco (Corresponding author)
Seuren, Simon
Bambach, Markus
Hirt, Gerhard