[Contribution to a book]
High-Moduls Steels
In: High-Performance Ferrous Alloys / edited by Radhakanta Rana, 291-326, 2021

Springer, Hauke Joachim
Baron, C.

[Contribution to a book, Contribution to a conference proceedings]
Influence of pass reduction in cold rolling on damage evolution in deep drawing of rotationally symmetric cups
In: International Deep-Drawing Research Group Conference (IDDRG 2021) 21st June - 2nd July 2021, Stuttgart, Germany, 1-8, 2021
[DOI: 10.1088/1757-899X/1157/1/012050]

Nick, Matthias (Corresponding author)
Liebsch, Conrad
Müller, Martina
Weiser, Ingo Felix
Hirt, Gerhard
et al.

[Journal Article]
On the effect of carbon content and tempering on mechanical properties and stiffness of martensitic Fe–18.8Cr–1.8B–xC high modulus steels
In: Materials science and engineering / A, 809, 141000, 2021
[DOI: 10.1016/j.msea.2021.141000]

Baron, C. (Corresponding author)
Werner, H.
Springer, Hauke Joachim

[Journal Article]
Sustainable steel through hydrogen plasma reduction of iron ore: Process, kinetics, microstructure, chemistry
In: Acta materialia, 213, 116971, 2021
[DOI: 10.1016/j.actamat.2021.116971]

Souza Filho, Isnaldi R. (Corresponding author)
Ma, Y.
Kulse, M.
Ponge, D.
Gault, B.
et al.

[Journal Article]
Modeling and exploiting the strip tension influence on surface imprinting during temper rolling of cold-rolled steel
In: Advances in industrial and manufacturing engineering, 3, 100045, 2021
[DOI: 10.1016/j.aime.2021.100045]

Li, Xinyang (Corresponding author)
Schulte, Christopher
Abel, Dirk
Teller, Marco
Hirt, Gerhard
et al.

[Journal Article]
Zwitterionic Nanogels and Microgels: An Overview on Their Synthesis and Applications
In: Macromolecular rapid communications, 42 (13), 2100112, 2021
[DOI: 10.1002/marc.202100112]

Saha, Pabitra
Ganguly, Ritabrata
Li, Xin
Das, Rohan
Singha, Nikhil K.
et al.

[Journal Article]
Voruntersuchungen zur Einsetzbarkeit des Walzprofilierens zur Herstellung bistabiler dünner Bleche
In: Forschung im Ingenieurwesen, 2021
[DOI: 10.1007/s10010-021-00488-5]

Pavliuchenko, Pavlo (Corresponding author)
Teller, Marco
Hirt, Gerhard

[Journal Article]
The effect of quench cracks and retained austenite on the hydrogen trapping capacity of high carbon martensitic steels
In: International journal of hydrogen energy, 46 (29), 16141-16152, 2021
[DOI: 10.1016/j.ijhydene.2021.02.057]

Pinson, M.
Springer, Hauke Joachim
Depover, T.
Verbeken, K. (Corresponding author)

[Journal Article]
Korngrößenvorhersage beim Freiformschmieden von Inconel 718 mit DIGIMU®
In: massivUMFORMUNG, 2021 (3), 50-54, 2021

Brüggemann, Holger (Corresponding author)
Quadfasel, Angela
Nietsch, Jürgen Andreas
Teller, Marco
de Micheli, Pascal
et al.

[Contribution to a conference proceedings]
Characterizing and simulating multi-pass hot roll bonding
In: Materials Data for smart forming technologies : MEFORM 2021 : 18.03.2021, Institut für Metallformung Freiberg, Virtuelle Konferenz / Institut für Metallformung, TU Bergakademie Freiberg, 77-80, 2021

Krämer, Alexander Maximilian (Corresponding author)
Liu, Zhao
Teller, Marco
Hirt, Gerhard

[Journal Article]
FepiM : A Novel Inverse Piecewise Method to Determine Isothermal Flow Curves for Hot Working
In: Metals : open access journal, 11 (4), 602, 2021
[DOI: 10.3390/met11040602]

Vuppala, Aditya Shiv Kanth (Corresponding author)
Krämer, Alexander Maximilian
Lohmar, Johannes
Hirt, Gerhard

[Journal Article]
Analysis and manufacturing of bistable metallic profiles
In: Archive of applied mechanics, 2021
[DOI: 10.1007/s00419-021-01916-2]

Pavliuchenko, Pavlo (Corresponding author)
Hirt, Gerhard
Teller, Marco

[Journal Article]
Limits to making L-shape ring profiles without ring growth
In: Journal of materials processing technology, 292, 117062, 2021
[DOI: 10.1016/j.jmatprotec.2021.117062]

Cleaver, Christopher John (Corresponding author)
Lohmar, Johannes
Tamimi, Saeed

[Contribution to a book, Contribution to a conference proceedings]
Economical production of conically shaped concentrated windings using forming technology for use in wheel hub engines
In: 2020 10th International Electric Drives Production Conference (E|DPC) : 8th and 9th December 2020 Online Conference ; Proceedings, 188-195, 2020
[DOI: 10.1109/EDPC51184.2020.9388188]

Petrell, Daniel
Teller, Marco
Hirt, Gerhard
Borzel, Stefan
Schafer, Waldemar

[Contribution to a conference proceedings, Journal Article]
Online Model Adaptation in Cold Rolling for Improvement of Thickness Precision
In: IFAC-PapersOnLine, 53 (2), 10372-10379, 2020
[DOI: 10.1016/j.ifacol.2020.12.2776]

Wehr, Matthias (Corresponding author)
Stenger, David
Schätzler, Sven Matthias
Beyer, Ralf
Abel, Dirk
et al.

[Contribution to a conference proceedings, Journal Article]
A New Inverse Explicit Flow Curve Determination Method for Compression Tests
In: Procedia manufacturing, 47, 824-830, 2020

Vuppala, Aditya shiv Kanth (Corresponding author)
Krämer, Alexander Maximilian
Braun, Alexander
Lohmar, Johannes
Hirt, Gerhard

[Contribution to a conference proceedings, Journal Article]
Design of Caliber Rolls Incorporating Load Path Dependent Damage Evolution
In: Procedia manufacturing, 47, 643-648, 2020

Li, Xinyang (Corresponding author)
Wang, Shuhan
Lohmar, Johannes
Hirt, Gerhard

[Contribution to a conference proceedings, Journal Article]
Prediction of Ductile Damage in the Process Chain of Caliber Rolling and Forward Rod Extrusion
In: Procedia manufacturing, 47, 649-655, 2020

Clausmeyer, Till (Corresponding author)
Schowtjak, Alexander
Wang, Shuhan
Gitschel, Robin
Hering, Oliver
et al.

[Journal Article]
Characterization of High-Strength Packaging Steels : Obtaining Material Data for Precise Finite Element Process Modelling
In: Metals : open access journal, 10 (12), 1683, 2020
[DOI: 10.3390/met10121683]

Knieps, Fabian (Corresponding author)
Liebscher, Benjamin
Moldovan, Ioana
Köhl, Manuel
Lohmar, Johannes

[Contribution to a book, Contribution to a conference proceedings]
Action Discretization for Robot Arm Teleoperation in Open-Die Forging
In: 2020 IEEE International Conference on Systems, Man, and Cybernetics : Toronto, Canada, October 11-14, 2020 / IEEE, IEEE SMC - Systems, Man, and Cybernetics Society ; general chair and co-chair: Hossam A. Gabbar (Ontario Tech University, Canada), Ljiljana Trajkovic (Simon Fraser University, Canada) ; publication co-chairs: Mohamed Elgendi (University of British Columbia, Canada), Hamed Shah-Mansouri (Sharif University of Technology, Iran), 2100-2105, 2020
[DOI: 10.1109/SMC42975.2020.9283043]

Behery, Mohamed (Corresponding author)
Tschesche, Matteo (Corresponding author)
Rudolph, Fridtjof (Corresponding author)
Hirt, Gerhard (Corresponding author)
Lakemeyer, Gerhard (Corresponding author)

[Journal Article]
Lubricant-free tribology concepts for cold extrusion by interaction-reduced surfaces
In: Dry metal forming open access journal : DMFOAJ, 6, 166-191, 2020

Teller, Marco (Corresponding author)
Prünte, Stephan
Ross, Ingo
Küpper, Moritz Emanuel
Poprawe, Reinhart
et al.

[Contribution to a conference proceedings, Journal Article]
Model framework for the simulation of microstructure and yield stress during aging of industrial Al-Mg-Si aluminum alloys
In: Procedia manufacturing, 50, 368-375, 2020
[DOI: 10.1016/j.promfg.2020.08.068]

Wagner, Fabrice (Corresponding author)
Bollmann, Christian
Brüggemann, Thiemo
Hojda, Stephan
Teller, Marco
et al.

[Contribution to a conference proceedings, Journal Article]
Simulation-as-a-Service for Reinforcement Learning Applications by Example of Heavy Plate Rolling Processes
In: Procedia manufacturing, 51, 897-903, 2020
[DOI: 10.1016/j.promfg.2020.10.126]

Scheiderer, Christian (Corresponding author)
Thun, Timo
Idzik, Christian
Posada-Moreno, Andrés Felipe
Krämer, Alexander Maximilian
et al.

[Contribution to a conference proceedings]
Kombinatorik in der Stahlentwicklung
In: [34. Aachener Stahlkolloquium, 2020-11-19 - 2020-11-19, Aachen, Germany], 97-100, 2020

Springer, Hauke Joachim (Corresponding author)
Baron, C.
Raabe, D.

[Journal Article]
Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels
In: Metallurgical and materials transactions / A, 51 (11), 5517-5586, 2020
[DOI: 10.1007/s11661-020-05947-2]

Raabe, Dierk (Corresponding author)
Sun, Binhan
Kwiatkowski da Silva, Alisson
Gault, Baptiste
Yen, Hung-Wei
et al.

[Contribution to a book, Contribution to a conference proceedings]
Untersuchung der schweißparameterabhängigen Umformbarkeit rührreibgeschweißter Aluminium-Kupfer-Mischverbindungen
In: 40. Assistentenseminar Füge- und Schweißtechnik : Vorträge der gleichnamigen Veranstaltung in Braunlage vom 25. bis 27. September 2019 / das 40. Assistentenseminar wurde vom Institut für Schweißtechnik der Technischen Universität Clausthal veranstaltet, 88-97, 2020

Rabe, Pascal (Corresponding author)
Schmitz, Roman Ulrich Christopher
Reisgen, Uwe
Schiebahn, Alexander
Hirt, Gerhard

[Journal Article]
Design of a V-Ti-Ni alloy with superelastic nano-precipitates
In: Acta materialia, 196, 710-722, 2020
[DOI: 10.1016/j.actamat.2020.07.023]

Zhang, J.-L.
Cann, J. L.
Maisel, S. B.
Qu, K.
Plancher, E.
et al.

[Journal Article]
Qualification of the in-situ bending technique towards the evaluation of the hydrogen induced fracture mechanism of martensitic Fe-C steels
In: Materials science and engineering / A, 792, 139754, 2020
[DOI: 10.1016/j.msea.2020.139754]

Pinson, M.
Springer, Hauke Joachim
Depover, T.
Verbeken, K. (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Model Predictive Control of an Overactuated Roll Gap with a Moving Manipulated Variable
In: 2020 American Control Conference : Sheraton Denver Downtown Hotel, Denver, CO, USA / general chair: Santosh Devasia (University of Washington) ; publications chair: Meeko Oishi (University of New Mexico), 1931-1936, 2020
[DOI: 10.23919/ACC45564.2020.9147360]

Wehr, Matthias
Schätzler, Sven Matthias
Abel, Dirk
Hirt, Gerhard

[Contribution to a conference proceedings]
Digital Process Planning for the Production of Sheet Metal Components as Prototypes and small Series with Stretch Forming and incremental Sheet Metal Forming
In: [New Developments in Sheet Metal Forming, NEBU, Stuttgart, Germany], 175-180, 2020

Schmitz, Roman Ulrich Christopher (Corresponding author)
Bailly, David
Hirt, Gerhard

[Contribution to a conference proceedings, Journal Article]
Prediction of Ductile Damage in the Process Chain of Caliber Rolling and Forward Rod Extrusion
In: Procedia manufacturing, 47, 649-655, 2020
[DOI: 10.1016/j.promfg.2020.04.201]

Clausmeyer, Till (Corresponding author)
Schowtjak, Alexander
Wang, Shuhan
Gitschel, Robin
Hering, Oliver
et al.

[Contribution to a conference proceedings, Journal Article]
Design of Caliber Rolls Incorporating Load Path Dependent Damage Evolution
In: Procedia manufacturing, 47, 643-648, 2020
[DOI: 10.1016/j.promfg.2020.04.198]

Li, Xinyang (Corresponding author)
Wang, Shuhan
Lohmar, Johannes
Hirt, Gerhard

[Journal Article]
On the Influence of the Tool Path and Intrusion Depth on the Geometrical Accuracy in Incremental Sheet Forming
In: Metals, 10 (5), 661, 2020
[DOI: 10.3390/met10050661]

Kordtomeikel, Roman Ulrich Christopher (Corresponding author)
Bremen, Thomas
Bailly, David
Hirt, Gerhard

[Contribution to a conference proceedings, Journal Article]
A New Inverse Explicit Flow Curve Determination Method for Compression Tests
In: Procedia manufacturing, 47, 824-830, 2020
[DOI: 10.1016/j.promfg.2020.04.257]

Vuppala, Aditya shiv Kanth (Corresponding author)
Krämer, Alexander Maximilian
Braun, Alexander
Lohmar, Johannes
Hirt, Gerhard

[Journal Article]
Investigation of bond formation behaviour in composite ring rolling
In: Journal of materials processing technology, 275, 116364, 2019
[DOI: 10.1016/j.jmatprotec.2019.116364]

Guenther, Stefan (Corresponding author)
Schwich, Gideon
Hirt, Gerhard

[Journal Article]
Control of residual stresses by roller leveling with regard to process stability and one-sided surface removal
In: Journal of materials processing technology, 280, 116600, 2020
[DOI: 10.1016/j.jmatprotec.2020.116600]

Grüber, Markus (Corresponding author)
Kümmel, Lutz
Hirt, Gerhard

[Contribution to a book, Journal Article]
Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion
In: Production engineering, 14 (1), 33-41, 2019
[DOI: 10.1007/s11740-019-00935-x]

Schowtjak, Alexander (Corresponding author)
Wang, Shuhan
Hering, Oliver
Clausmeyer, Till
Lohmar, Johannes
et al.

[Contribution to a book, Journal Article]
Torsion plastometer trials to investigate the effect of non-proportional loading paths in caliber rolling on damage and performance of metal parts
In: Production engineering, 14 (1), 17-32, 2020
[DOI: 10.1007/s11740-019-00949-5]

Wang, Shuhan (Corresponding author)
Dunlap, Anthony
Möhring, Kerstin
Lohmar, Johannes
Schwedt, Alexander
et al.

[Journal Article]
Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling
In: Production engineering, 14 (1), 5-16, 2019
[DOI: 10.1007/s11740-019-00932-0]

Imran, Muhammad (Corresponding author)
Afzal, Muhammad Junaid
Buhl, Johannes
Bambach, Markus
Dunlap, Anthony
et al.

[Contribution to a book, Journal Article]
Potential and status of damage controlled forming processes
In: Production engineering, 14 (1), 1-4, 2020
[DOI: 10.1007/s11740-019-00948-6]

Hirt, Gerhard (Corresponding author)
Tekkaya, A. Erman
Clausmeyer, Till
Lohmar, Johannes

[Book]
Damage controlled forming processes
In: Production engineering, 14 (1), 1-134, 2020

Hirt, Gerhard (Editor)
Tekkaya, A. Erman (Editor)

[Contribution to a book, Journal Article]
Modelling of void healing in hot rolling due to recrystallization
In: Production engineering, 14 (1), 43-52, 2019
[DOI: 10.1007/s11740-019-00938-8]

Li, Xinyang (Corresponding author)
Liebsch, Conrad
Hirt, Gerhard
Lohmar, Johannes

[Journal Article]
Correlating magnetic properties of ferritic NO electrical steel containing 2.4 m.%Si with hot strip microstructure
In: Journal of magnetism and magnetic materials : MMM, 501, 166431, 2020
[DOI: 10.1016/j.jmmm.2020.166431]

Stoecker, Anett (Corresponding author)
Leuning, Nora
Hameyer, Kay
Wei, Xuefei
Hirt, Gerhard
et al.

[Contribution to a book, Journal Article]
Investigation on the influence of damage on the fatigue strength of hot rolled sheet metal
In: Production engineering, 14 (1), 65-75, 2019
[DOI: 10.1007/s11740-019-00933-z]

Liebsch, Conrad (Corresponding author)
Möhring, Kerstin
Lohmar, Johannes
Walther, Frank
Hirt, Gerhard

[Journal Article]
Analysis of process forces and geometrical correlations for open-die forging with superimposed manipulator displacements
In: Journal of materials processing technology, 276, 116408, 2019
[DOI: 10.1016/j.jmatprotec.2019.116408]

Wolfgarten, Martin Christoph (Corresponding author)
Rudolph, Fridtjof
Hirt, Gerhard

[Journal Article]
Analysis of the bond strength of voids closed by open-die forging
In: International journal of material forming, 13 (1), 117-126, 2019
[DOI: 10.1007/s12289-019-01474-7]

Hibbe, Paul (Corresponding author)
Hirt, Gerhard

[Contribution to a book, Contribution to a conference proceedings]
Design and Analysis of Freeform Shell Structures Composed of Doubly Curved Sheet Metal Panels
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 60-67, 2019

Seiter, Alex Josef (Corresponding author)
Pofahl, Thorsten Christian
Trautz, Martin
Reitmaier, Lisa-Marie
Hirt, Gerhard

[Contribution to a book, Contribution to a conference proceedings]
Manufacturing of Conically Shaped Concentrated Windings for Wheel Hub Engines by a Multi-Stage Upsetting Process
In: 2019 9th International Electric Drives Production Conference (E|DPC) : 3 and 4 December 2019, Esslingen, Germany : proceedings / E|DPC-2019 - Electric Drives Production Conference 2019 ; sponsored by: IEEE, FAU - Friedrich Alexander Universität Erlangen-Nürnberg, IAS - IEEE Industry Applications Society, PELS - IEEE Power Electronics Society, 9011944, 7 Seiten, 2019
[DOI: 10.1109/EDPC48408.2019.9011944]

Petrell, Daniel (Corresponding author)
Teller, Marco (Corresponding author)
Hirt, Gerhard (Corresponding author)
Borzel, Stefan (Corresponding author)
Schafer, Waldemar (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Parametrization of bi-parametric friction models through inverse modelling of conical tube-upsetting tests
In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere]. - B, 120002, 2019
[DOI: 10.1063/1.5112657]

Henze, Michel (Corresponding author)
Teller, Marco
Hirt, Gerhard

[Abstract, Contribution to a book, Contribution to a conference proceedings]
Correlating magnetic properties of ferritic NO electrical steelcontaining 2.4 m.%Si with hot strip microstructure
In: 24th Soft Magnetic Materials Conference : Abstracts : September 4-7, 2019, Poznań, Poland / Institute of Molecular Physics, Polish Academy of Sciences Faculty of Technical Physics, Poznan University of Technology, Polish Materials Science Society ; Edited by: P. Lesniak, B. Idzikowski, R. Czajka, A. Szajek, O-39, 57-57, 2019

Stoecker, Anett (Corresponding author)
Leuning, Nora
Hameyer, Kay
Wei, Xuefei
Hirt, Gerhard
et al.