Publications
Showing 251 - 300 of 1099 Results
Turn Page
- First Page
- Previous Page
- 1-50
- 151-200
- 201-250
- Sie sind auf Seite:251-300
- 301-350
- 351-400
- Last Page
- Next Page
- 501-550
-
SourceAuthor(s)
-
[Journal Article]
Robot Controlled Rotary Peen Forming by Laser-Assisted Distance Control
In: Key engineering materials : KEM, 651/653, 1084-1089, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.1084]Gottschalk, Markus
Bambach, Markus
Hirt, Gerhard -
[Journal Article]
A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium
In: CIRP annals, manufacturing technology, 64/1, 289-292, 2015
[DOI: 10.1016/j.cirp.2015.04.086]Teller, Marco
Bambach, Markus
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings]
Development of a Parallel Valve Control for a Hot Gas Bulge Test
In: The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15 : proceedings : May 20-22, 2015, Tampere, Finland / [organized and hosted by the Department of Intelligent Hydraulics and Automation (IHA), Tampere University of Technology (TUT) ; Arto Laamanen (editor), Kalevi Huhtala (editor)], 754-764, 2015Storz, Johannes
Braun, Alexander
Murrenhoff, Hubertus -
[Journal Article]
Implementation of an open-die forging process for large hollow shafts for wind power plants with respect to an optimized microstructure
In: Metallurgia italiana, 2015 (4), 43-49, 2015Wolfgarten, Martin Christoph
Rosenstock, Dirk
Schaeffer, Lirio
Hirt, Gerhard -
[Journal Article]
Production of Clad Steel Strips by Twin-Roll Strip Casting
In: Advanced engineering materials, 17 (11), 1588–1597, 2015
[DOI: 10.1002/adem.201500094]Vidoni, Michele
Ackermann, Rebecca
Richter, Silvia
Hirt, Gerhard -
[Journal Article]
Investigation of the suitability of surface treatments for dry cold extrusion by process-oriented tribological testing
In: Key engineering materials, 651/653, 473-479, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.473]Teller, Marco
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al. -
[Journal Article]
Determination of thermal boundary conditions for modeling the hot roll bonding process
In: Key engineering materials, 651-653, 1357-1362, 2015Melzner, Alina
Hirt, Gerhard -
[Journal Article]
The Effect of the Initial Stress and Strain State in Sheet Metals on the Roller Levelling Process
In: Key engineering materials, 651-653, 1023-1028, 2015Grüber, Markus
Oligschläger, Marius
Hirt, Gerhard -
[Journal Article]
First Experimental and Numerical Study on the Use of Sheet Metal Die Covers for Wear Protection in Closed-die Forging
In: Key engineering materials, 651-653, 266-271, 2015Rosenstock, Dirk
Segebade, Eric Thore
Hirt, Gerhard -
[Journal Article]
Improving Geometrical Accuracy for Flanging by Incremental Sheet Metal Forming
In: International journal of material forming, 8 (3), 391-399, 2014
[DOI: 10.1007/s12289-014-1182-y]Voswinckel, Holger
Bambach, Markus
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings]
Designing new forging steels by ICMPE
In: Advances in Production Technology / edited by Christian Brecher, 85-98, 2015
[DOI: 10.1007/978-3-319-12304-2_7]Bleck, Wolfgang
Prahl, Ulrich
Hirt, Gerhard
Bambach, Markus -
[Journal Article]
Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity
In: Mechanics of materials, 84, 127-139, 2015
[DOI: 10.1016/j.mechmat.2015.01.019]Bambach, M.
Heppner, S.
Steinmetz, D.
Roters, F. -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Experimental and Numerical Investigation on Controlling the Material Flow in Open-die Forging through Superimposed Manipulator Displacement
In: Key engineering materials, 651/653, 272-277, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.272]Wolfgarten, Martin Christoph
Rosenstock, Dirk
Freitag, Jan
Hirt, Gerhard -
[Journal Article]
Entwicklung eines Hot-Gas-Bulgetests : ein Materialprüfstand für hohe Umformgeschwindigkeiten bei hohen Temperaturen
In: O + P : Fluidtechnik für den Maschinen- und Anlagenbau, 59 (1), 19-25, 2015Storz, Johannes
Braun, Alexander
Murrenhoff, Hubertus -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Flexible Manufacturing of Double-Curved Sheet Metal Panels for the Realization of Self-Supporting Freeform Structures
In: Key engineering materials, 639, 41-48, 2015
[DOI: 10.4028/www.scientific.net/KEM.639.41]Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Della Puppa, Giovanni
et al. -
[Journal Article]
Finite Element Analysis of Manufacturing Micro Lubrication Pockets in High Strength Steels by Hot Micro-Coining
In: Steel research international, 86 (3), 257-265, 2015
[DOI: 10.1002/srin.201300475]Szurdak, Adam
Hirt, Gerhard -
[Journal Article]
On instabilities of force and grain size predictions in the simulation of multi-pass hot rolling processes
In: Journal of materials processing technology, 216, 95-113, 2015
[DOI: 10.1016/j.jmatprotec.2014.07.018]Bambach, Markus
Seuren, Simon -
[Journal Article]
Twin-roll strip casting : a competitive alternative for the production of high-manganese steels with advanced mechanical properties
In: Materials science and engineering / A, 627, 72-81, 2015
[DOI: 10.1016/j.msea.2014.12.069]Daamen, Markus
Haase, Christian
Dierdorf, Jens
Molodov, Dmitri A.
Hirt, Gerhard -
[Journal Article]
Materials modelling in industrial bulk metal forming processes and process chains
In: Computer Methods in Materials Science, 15 (1), 5-12, 2015Hirt, Gerhard
Bambach, Markus
Lohmar, Johannes
Güvenc, Onur
Henke, Thomas
et al. -
[Contribution to a book]
The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts
In: Advances in Production Technology / edited by Christian Brecher, 117-129, 2015
[DOI: 10.1007/978-3-319-12304-2_9]Hirt, Gerhard
Bambach, Markus
Bleck, Wolfgang
Prahl, Ulrich
Stollenwerk, Jochen Hugo -
[Contribution to a book, Contribution to a conference proceedings]
Recent Investigations on Shot Peen Forming of GLARE Sheets and Rotary Peen Forming
In: ICSP12 : proceedings of the 12th International Conference on Shot Peening : Goslar, Germany, September 15-18, 2014 / editor Lothar Wagner, Chairman of ICSP-12, Institute of Materials Science and Engineering, Clausthal University of Technology, Germany, 427-432, 2014Russig, Christoph
Gottschalk, Markus
Bambach, Markus
Hirt, Gerhard -
[Contribution to a conference proceedings]
Fast and Accurate Force Prediction for High Quality Heavy Plates by A State Of The Art Rolling Model Calibrated From Mill Data via Inverse Techniques
In: 1st European Steel Technology & Application Days and 31st Journ'ees Sid'erurgiques Internationales, 2014Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
Kiefer, T.
Kotliba, D.
et al. -
[Book, Report]
Untersuchungen zur Herstellbarkeit von frei geformten Hüll- und Fassadenelementen als selbsttragende Struktur ohne Unterkonstruktion aus nichtrostendem Stahl mittels inkrementeller Blechumformung (IBU), XXVI, 189, 14 S. : Ill., graph. Darst., 2014Hirt, Gerhard
Heise, Franz-Josef
Bambach, Markus
Bailly, David
Trautz, Martin
et al. -
[Contribution to a conference proceedings]
A new concept for freeform shell structures composed of doublycurvedmultilayered panels
In: [Proceedings of the IASS-SLTE 2014 Symposium : the IASS-SLTE 2014 Symposium encompassing the annual IASS Symposium and the 6th Latin American Symposium on Tension Structures, 15 to 19 September 2014], 2014Pofahl, Thorsten
Della Puppa, Giovanni
Trautz, Martin
Bailly, David
Hirt, Gerhard -
[Contribution to a conference proceedings, Journal Article]
A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation
In: Conference Papers in Science, 2015, 496515, 2014
[DOI: 10.1155/2015/496515]Teller, Marco
Seuren, Simon
Bambach, Markus
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings]
Coupling microstructure evolution model with Fe code for numerical simulation of rolling-cooling sequence for rails
In: Metal 2014: 23rd International Conference On Metallurgy And Materials, 418-424, 2014Smyk, Grzegorz
Frantzke, Martin
Kuziak, Roman
Pietrzyk, Maciej -
[Contribution to a book, Contribution to a conference proceedings]
Fast simulation of asymmetric incremental sheet metal forming
In: NUMISHEET 2014 : Melbourne, Australia, 6 - 10 January 2014 / the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Eds.: Jeong Whan Yoon ..., 844-847, 2014
[DOI: 10.1063/1.4850102]Bambach, Markus -
[Contribution to a book, Contribution to a conference proceedings]
Strip casting and ingot casting : comparison of different cooling conditions regarding the as-cast quality
In: Proceedings : 8th eccc ; European Continuous Casting Conference ; 23-26 June 2014, Graz, Austria, 1271-1281, 2014Daamen, Markus
von Schweinichen, Petrico
Richter, Silvia
Hirt, Gerhard
Senk, Dieter -
[Journal Article]
Composition Dependence of Phase Stability, Deformation Mechanisms, and Mechanical Properties of the CoCrFeMnNi High-Entropy Alloy System
In: JOM, 66 (10), 1993-2001, 2014
[DOI: 10.1007/s11837-014-1133-6]Tasan, C. C.
Deng, Y.
Pradeep, K. G.
Yao, M. J.
Springer, H.
et al. -
[Journal Article]
The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques
In: Steel research international, 85 (11), 1525-1532, 2014
[DOI: 10.1002/srin.201300431]Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
Kiefer, Thomas
Kotliba, Daniel -
[Journal Article]
Shot peen forming of fiber metal laminates on the example of GLARE®
In: International journal of material forming, 7 (4), 425-438, 2014
[DOI: 10.1007/s12289-013-1137-8]Russig, Christoph
Bambach, Markus
Hirt, Gerhard -
[Contribution to a conference proceedings, Journal Article]
A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming
In: Procedia engineering, 81, 2305-2310, 2014
[DOI: 10.1016/j.proeng.2014.10.325]Bambach, Markus
Voswinckel, Holger
Hirt, Gerhard -
[Contribution to a conference proceedings, Journal Article]
Selected Processes and Modeling Techniques for Rolled Products
In: Procedia engineering, 81, 18-27, 2014
[DOI: 10.1016/j.proeng.2014.09.124]Hirt, Gerhard
Senge, Stefan -
[Contribution to a conference proceedings, Journal Article]
Deformation Behavior of High-manganese TWIP Steels Produced by Twin-roll Strip Casting
In: Procedia engineering, 81, 1535-1540, 2014
[DOI: 10.1016/j.proeng.2014.10.186]Daamen, Markus
Nessen, Wiebke
Pinard, Philippe T.
Richter, Silvia
Schwedt, Alexander
et al. -
[Contribution to a conference proceedings, Journal Article]
Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel
In: Procedia engineering, 81, 268-273, 2014
[DOI: 10.1016/j.proeng.2014.09.162]Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings]
On the Effect of Material Processing : Microstructural and Magnetic Properties of Electrical Steel Sheets
In: 2014 4th International Electric Drives Production Conference (EDPC 2014) : Nuremberg, Germany, 30 September - 1 October 2014 ; [including related conferences: E-Motive Forum of the German Machine Builders Association (VDMA), the Energy Transfer for Electric Vehicles Conference (E|TEV) ...] / IEEE, 464-470, 2014
[DOI: 10.1109/EDPC.2014.6984436]Steentjes, Simon
Franck, David Andre
Hameyer, Kay
Vogt, S.
Bednarz, M.
et al. -
[Contribution to a conference proceedings]
Near Net Shape Production of Baseflages by Radial-Axial Ring Rolling
In: 19th International Forgemasters Meeting : 29.09-03.10.2014, Tokyo Bay Area, Japan / Herausgeber: JSCFA - Steel Castings and Forgings Association of Japan, 233-239, 2014Seitz, Joachim Friedhelm
Schwich, Gideon
Jenkouk, Vahid
Hirt, Gerhard -
[Contribution to a conference proceedings]
Online Analysis of Cogging Processes : Evaluation of the Equivalent Strain, Temperature and Grain Size Distribution
In: 19th International Forgemasters Meeting : 29.09-03.10.2014, Tokyo Bay Area, Japan / Herausgeber: JSCFA - Steel Castings and Forgings Association of Japan, 507-512, 2014Rosenstock, Dirk
Recker, Dominik
Hirt, Gerhard -
[Journal Article]
Hot rolling of AISI 304 tailored strips procuced by twin roll strip casting
In: Production engineering, 8 (5), 619-626, 2014
[DOI: 10.1007/s11740-014-0567-6]Vidoni, Michele
Daamen, Markus
Gastreich, Jan
Offermanns, Nico
Hirt, Gerhard -
[Journal Article]
Online Visualization during Open Die Forging and Optimization of Pass Schedules
In: Steel research international, 85 (9), 1348-1354, 2014
[DOI: 10.1002/srin.201300396]Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Process and materials modelling in incremental bulk metal forming
In: 7th Forming Technology Forum 'Warm and Hot Forming' 15.-16.09.2014, Enschede, Niederlande / Herausgeber: Faculty of Engineering Technology, University of Twente, Enschede, the Netherlands. Ton van den Boogaard, 13-20, 2014Hirt, Gerhard
Lohmar, Johannes
Rosenstock, Dirk
Seitz, Joachim Friedhelm -
[Journal Article]
Characteristics of testing conditions for constitutive models in metal plasticity
In: Journal of engineering mathematics, 88 (1), 99-119, 2014
[DOI: 10.1007/s10665-013-9681-2]Bambach, Markus
Bücker, H. Martin
Heppner, Stephan
Herty, Michael
Vladimirov, Ivaylo N. -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Prediction of microstructure and resulting rolling forces by application of a material model in a hot ring rolling process
In: Key engineering materials, 622/623, 970-977, 2014
[DOI: 10.4028/www.scientific.net/KEM.622-623.956]Schwich, Gideon
Henke, Thomas
Seitz, Joachim Friedhelm
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Analysis into differences between the buckling in single-point and two-point incremental sheet forming of components for self-supporting sheet metal structures
In: Key engineering materials, 622/623, 367-374, 2014
[DOI: 10.4028/www.scientific.net/KEM.622-623.367]Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Herkrath, Ralf
et al. -
[Contribution to a conference proceedings, Journal Article]
Manufacturing of Innovative Self-Supporting Sheet-Metal Structures Representing Freeform Surfaces
In: Procedia CIRP, 18, 51-56, 2014
[DOI: 10.1016/j.procir.2014.06.106]Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Herkrath, Ralf
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Development of a pneumatic bulge test for high temperatures and controlled strain rates
In: WGP Congress 2014 : progress in production engineering ; selected, peer reviewed papers from the 2014 WGP Congress, September 9 - 10, 2014, Erlangen, Germany ; [FAU Friedrich-Alexander-Universität Erlangen-Nürnberg, Technische Fakultät] / ed. by Marion Merklein ..., 245-252, 2014
[DOI: 10.4028/www.scientific.net/AMR.1018.245]Braun, Alexander
Storz, Johannes
Bambach, Markus
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings]
Adjusting of Roller Levellers by Finite Element Simulations Including a Closed-loop Control
In: WGP Congress 2014 : progress in production engineering ; selected, peer reviewed papers from the 2014 WGP Congress, September 9 - 10, 2014, Erlangen, Germany ; [FAU Friedrich-Alexander-Universität Erlangen-Nürnberg, Technische Fakultät] / ed. by Marion Merklein ..., 207-214, 2014
[DOI: 10.4028/www.scientific.net/AMR.1018.207]Grüber, Markus
Oligschläger, Marius
Hirt, Gerhard -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
A cohesive zone model for simulation of the bonding and debonding in metallic composite structures - experimental validations
In: Key engineering materials, 622/623, 443-452, 2014
[DOI: 10.4028/www.scientific.net/KEM.622-623.443]Kebriaei, Reza
Mikloweit, Alexander
Vladimirov, Ivaylo N.
Bambach, Markus
Reese, Stefanie
et al. -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Investigation of a bulge test at high temperatures and high strain rates using a finite-element simulation study
In: Key engineering materials, 622/623, 300-307, 2014
[DOI: 10.4028/www.scientific.net/KEM.622-623.292]Braun, Alexander
Bambach, Markus
Hirt, Gerhard -
[Journal Article]
A finite element framework for the evolution of bond strength in joining-by-forming processes
In: Journal of materials processing technology, 214 (10), 2156-2168, 2014
[DOI: 10.1016/j.jmatprotec.2014.03.015]Bambach, M.
Pietryga, M.
Mikloweit, A.
Hirt, Gerhard
Turn Page
- First Page
- Previous Page
- 1-50
- 151-200
- 201-250
- Sie sind auf Seite:251-300
- 301-350
- 351-400
- Last Page
- Next Page
- 501-550