Person

Tobias Teeuwen

M.Sc.
Institute of Metal Forming

Academic Staff

Address

Room: U109

Intzestraße 10

52072 Aachen

Contact

WorkPhone
Phone: +49 241 80-98118
Fax Fax: +49 241 80-92234
 

Publications

Source Author(s)
[Contribution to a conference proceedings, Journal Article]
Investigation on evolution of microstructure and mechanical properties of heat-treatable 6010-S aluminium alloy during gas-based hot sheet metal forming process
In: IOP conference series / Materials science and engineering, 1284 (1), 012005, 2023
[DOI: 10.1088/1757-899X/1284/1/012005]
Teeuwen, Tobias (Corresponding author)
Baru, Naveen Krishna
Bailly, David
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
Systematische Entwicklung und Validierung von Simulationsmethoden für die Auslegung moderner gasbasierter Aluminiumwarmblechumformprozesse
In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 271-282, 2022
Baru, Naveen Krishna (Corresponding author)
Teeuwen, Tobias
Bailly, David
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
Hochtemperatur-Doppelblech-Bulgetest zur Bestimmung der Grenzformänderung in der Aluminiumwarmblechumformung
In: Ideen Form geben : 36. ASK Umformtechnik : 26.-27. Oktober 2022, Eurogress Aachen : Tagungsband / Hrsg.: Gerhard Hirt ; Institut für Bildsame Formgebung, Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 111-122, 2022
Teeuwen, Tobias (Corresponding author)
Baru, Naveen Krishna
Tilly, Karl Johann
Bailly, David
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
A novel benchmark test for validating the modelling and simulation methodology of modern gas-based hot sheet metal forming processes
In: NUMISHEET 2022 : Proceedings of the 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes / edited by Kaan Inal, Julie Levesque, Michael Worswick, Cliff Butcher, 785-801, 2022
[DOI: 10.1007/978-3-031-06212-4_71]
Baru, Naveen Krishna (Corresponding author)
Teeuwen, Tobias
Bailly, David
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
Development of a high-temperature double-layer bulge test for failure prediction in gas-based hot forming of a high-strength aluminium alloy
In: 41st International Deep Drawing Research Group (IDDRG) Conference / editor: Prof Sandrine Thuillier, IRDL - Université Bretagne Sud ; co-editors; Prof Vincent Grolleau, IRDL - Université Bretagne Sud, on leave at ETH Zürich; Prof Hervé Laurent, IRDL - Université Bretagne Sud, 9 Seiten, 2022
[DOI: 10.1088/1757-899X/1238/1/012049]
Teeuwen, Tobias (Corresponding author)
Baru, Naveen Krishna
Tilly, Karl Johann
Bailly, David
Hirt, Gerhard
[Contribution to a book, Contribution to a conference proceedings]
On appropriate Finite Element discretization in simulation of gas-based hot sheet metal forming processes
In: Digital technologies in sheet metal forming : 40th International Deep-Drawing Research Group Conference 2021 : Stuttgart, Germany / editors: Univ. Prof. Dr.-Ing. Dr.h.c. Mathias Liewald, MBA; Dr.sc.techn. Celalettin Karadogan, 012027, 1-8, 2021
[DOI: 10.1088/1757-899X/1157/1/012027]
Baru, Naveen Krishna (Corresponding author)
Teeuwen, Tobias
Teller, Marco
Hojda, Stephan
Braun, Alexander
et al.