Digital Forming

  Digital Process Planing of Incremental Sheet Metal Forming Copyright: © Ahrens+Steinbach Projekte

Digital data processing is widely used in industrial manufacturing. Planning, design, control and regulation of forming processes also become more and more digital.

The research topics embedded in this cross-sectional area are assigned to different research groups and are presented below.


Roller Leveling

Richtwalzanlage am Institut für Bildsame Formgebung

Research in field of roller leveling aims on developing a process control for an automatic setting of the leveler according to the characteristics of the strip to be leveled. The process control shall identify variations in the strip characteristics, e.g. material properties, and compensate them. Therefore, the force in the first load triangle is measured. This measurement is used as a reference value to correlate strip characteristics and the optimum setting of the leveler. In order to generate the necessary data, a wide variety of parameters is calculated within an FE model of the leveling process. Based on the results the control concept is transferred to an actual leveling machine. According to the results the process control is able to detect changes of the strip characteristics and to compensate those successfully. In addition to the flatness of the strip the possibility to set defined residual stress distributions within the strip is investigated.

For further information, please contact Annemarie Heiser.


Image: Roller leveling machine at the Institute of Metal Forming, Copyright: IBF
Process control for roller leveling
Process control for roller leveling

High Precision Rolling with Roughness Control

Spaltband läuft in ein Quarto-Walzgerüst

In a joined project with the Institute of Automatic Control of the RWTH Aachen University, new approaches to extend the flexibility and process window of the imprinted roughness of a skin-pass rolling process are investigated. Based on the previous research project of the high precision rolling with piezoelectric actuators, a fast rolling model and its online identification, the strip tension is used as an additional actuator to control the imprinted roughness during skin-pass rolling. A model-based control is realized from the results of FE simulations. To identify the deviation and defects during the process, an optical roughness sensor has been integrated in the high precision rolling mill des IBF integriert. Ziel ist es die Lackierbarkeit sowie die tribologischen Eigenschaften der Produkte durch einen Softsensor mit Eigenschaftsmodellen vorherzusagen.

For further information, please contact Mengmeng Zhang.

Image: Slit strip runs into a 4-high stand, Copyright: Martin Braun

Fast Process Models for Rolling

Einzelstich beim Walzen inklusive Kraft-, Temperatur- und Mikrostrukturentwicklung

Fast process models enable the accurate simulation of heavy plate rolling on the industrial and laboratory scale. Based on the pass schedule and material parameters it predicts the most important properties, such as force, temperature and microstructure, within seconds. Thus it has a wide range of applications, particularly in the field of design and optimization. With Industry 4.0 in mind, it has been coupled to a data base of industrial trials resulting in the ability to determine material parameters from just the measured forces. It has furthermore been coupled with machine learning algorithms to automatically design pass schedules for the universal rolling mill at the IBF. Fast process models are also being used for teaching and seminars, supplemented by a specially created graphical user interface. It allows students and seminar participants to develop an intuitive approach to the design, calculation and optimization of pass schedule as well as a detailed understanding of the underlying mechanisms.

For further information, please contact Christian Idzik.

Image: Single pass during rolling including force, temperature and microstructure evolution, Copyright: IBF
Fast Rolling Models for Pass Schedule Design
Fast rolling models for pass schedule design

Pass Schedule Design via Machine Learning

Interaktion der Einflussgrößen bei der Stichplanauslegung

The design of pass schedules for rolling is based on expert and empirical knowledge. This is due to each pass influencing all subsequent passes. Machine learning algorithms could provide an approach to automatize the design of pass schedules. By training them they can derive knowledge from data without needing an explicit mathematical formulation. As a proof of concept a fast process model was therefore coupled with a machine learning algorithm. In this way, models can be trained that automatically design pass schedules if the initial and final state of the workpiece are provided as input. The boundary conditions are given by he universal rolling mill available at the IBF. The designed pass schedule fulfills all boundary conditions while exactly meeting the final state of the workpiece. Therefor the automatized design of pass schedules using machine learning algorithms seems feasible.

For further information, please contact Christian Idzik.

Image: Interaction of influencing parameters during pass schedule design for rolling, Copyright: IBF

STOFF - Fast Calculation Models for Open-Die Forging


Open-die forging is an incremental forming process, where the initial ingot is forged in up to many hundred forming steps towards the final geometry. The design of new forging process is mainly realized based upon experience or simple geometric correlations. However, by this only a simple geometrical-based process design is possible which does not give any statement about the temperature, the equivalent strain and the grain size. Since FE-simulation of open-die forging is very time consuming and requires a large numerical effort, the IBF developed fast calculation models for open-die forging, which allow the fast calculation of these decisive target values within seconds. Combined with a GUI, a property based design and optimization of open-die forging process can be successfully realized. Furthermore, these models offer a significant potential for teaching purposes as the correlations between forging parameters and resulting workpiece properties can be analyzed in a descriptive way.

For further information, please contact Niklas Reinisch.

Image: Extended informations about the forging process using fast models, Copyright: IBF
STOFF - Fast Forging Models for Process Design
STOFF - Fast forging models for process design

Online Assisting System for Open-Die Forging

Online-Assistenzsystem an der IBF-Schmiedepresse

To ensure excellent and homogeneous mechanical properties, industrial open-die forging requires a smooth and controlled forging sequence. However, during the actual forging process it is not possible to measure decisive workpiece properties as the grain size, equivalent strain and the temperature distribution within the workpiece. Therefore, it is not possible for the press operator to evaluate the impact of small deviations from the planned process sequence on the resulting workpiece properties. Thus, the following process sequence cannot be optimized with respect e.g. to the microstructure. Due to this issue, one main research topic in the field of forging at IBF is the development of an assisting system for open-die forging. By applying fast process models for temperature, strain and grain size, the system allows the operator to evaluate the workpiece properties based upon measured and calculated values. This approach follows the vision to develop an autonomous process control for open-die forging. In this context, the IBF open-die forging center will be used as demonstrator.

For further information, please contact Nikhil Jagtap.

Image: Online-assisting system at IBF forging press, Copyright: IBF

Flexible Radial Ring Rolling for Producing Non-Axially Symmetric Seamless Rings

Flexibles radiales Ringwalzen

Minimizing material and milling costs by near-net shape ring rolling today plays an important economical and environmental role. Industrially feasible ring geometries are exclusively rotationally symmetric, even though applications with varying volume distribution around the circumference exist, e.g. eccentric rings with a nearly linear wall thickness distribution. Depending on size, these parts are produced by milling, closed-die forging or casting processes, while disadvantages in terms of material waste, process flexibility or mechanical properties have to be accepted.
This project aims to further develop the ring rolling process to enable production of near-net shape eccentric ring geometries. Especially for large parts this allows for large material savings without restricting process flexibility or product properties.

For further information, please contact Mirko Gröper.

Image: Flexible radial ring rolling, Copyright: IBF
Flexible Ring Rolling - Excentrical Rings
Flexible ring rolling - excentrical rings

Integrated CAx Process Chain

Bauteilfertigung mittels integrierter CAx-Prozesskette

In prototyping and small batch production, conventional manufacturing processes, such as deep drawing, are usually not economically applicable. Flexible processes with low tooling effort, such as stretch forming and Incremental Sheet Forming, short ISF, are a promising alternative to realize parts within a very short time. In addition, the goal "first time right" is pursued to save resources. Therefore, reliable and precise planning tools and models are needed. The integrated CAx process chain, developed at the IBF, enables the process planning in a CAD-CAM environment with corresponding interfaces to FE models and digital image correlation tools. Numerical simulations of stretch forming or ISF provide digital geometries that can be compared with the target geometry. In so doing, iteration cycles during the prototype production are performed virtually while material-intensive and time-consuming experiments are avoided.

For further information, please contact Thomas Bremen.

Image: Production using integrated CAx process chain, Copyright: Ahrens+Steinbach Projekte
Digital Process Planing for Flexible Sheet Metal Forming
Digital process planing for Flexible Sheet Metal Forming